Cosorption of Zn(II) and 2-, 3-, or 4-aminopyridine by montmorillonite

Data from acid-base titrations at 25 degrees C of Zn(NO(3))(2) and 2-, 3-, or 4-aminopyridine in 10 mM KNO(3) as background electrolyte suggested that soluble complexes ZnL(2+) and Zn(OH)L(+) form, where L represents aminopyridine. Zinc-hydroxyaminopyridine complexes have not been reported previously. The cosorption of Zn(II) with each of the aminopyridines to K-saturated Wyoming (SWy-K) and Texas (STx-K), and Ca-enriched Texas (STx-Ca) montmorillonites was measured at 25 degrees C, with 10 mM KNO(3) or 3.3 mM Ca(NO(3))(2) as background electrolyte. Comparison with previous data for sorption of Zn(II) and the aminopyridines separately and surface complexation modeling of the cosorption data showed that under acid conditions competition between Zn(2+) and aminopyridinium ions for the permanent negatively charged sites of montmorillonite results in suppression of the uptake of each sorbate by the other, but only when a large excess of the competing sorbate is present. Under alkaline conditions the sorption of Zn(II) was not affected by the presence of even a large excess of aminopyridine, but the sorption of 4-aminopyridine in particular was slightly enhanced when a large excess of Zn(II) was present. The enhancement was attributed to the formation of metal-bridged ternary surface complexes at the variable-charge sites on the edges of the montmorillonite crystals.     

Vibrational spectrum of I(H2O)

The infrared spectrum of the ionic cluster I⁻(H₂O) was recorded from 3170 to 3800 cm⁻¹ by vibrational predissociation spectroscopy. A strong multiplet observed at 3415 cm⁻¹ and a narrow band at 3710 cm⁻¹ were assigned as a hydrogen-bonded OH stretch and free OH stretch respectively, indicating that H₂O forms a single hydrogen bond with the iodide anion. Ab initio vibrational frequencies and intensities were computed at the second-order Møller-Plesset (MP2) level for the minimum energy configuration, a nearly linear hydrogen-bonded isomer, and for a low-lying saddlepoint, a symmetric C_2v bridged isomer. The spectrum predicted for the hydrogen-bonded isomer agreed well with experiment.     

Synthesis of 5,12-diazadibenz[a,h]anthracene

5, 12-Diazadibenz[a,h]anthracene ( 20 ) was synthesized in 21% overall yield for seven steps. Salient features of the synthesis include the initial, one-step conversion of trans, trans-1,4-bis-(β-nitrovinyl)benzene into 2,2″-dinitro-p-terphenyl by Diels-Alder condensation plus elimination, monocyclization of the derived 2,2″-diformylamino-p-terphenyl to give 8-(2-amino-1-phenyl)-phenanthridine ( 10 ) in the presence of fortified polyphosphoric acid, and accomplishment of a second cyclization step only after reduction of the heteroring in 10 (by means of diisobutyl-aluminum hydride) plus formylation. The 6-methyl and 6,13-dimethyl derivatives of 20 were prepared similarly.     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

Concise and enantioselective synthesis of the aminocyclitol core of hygromycin A

[reaction: see text] Stereoselective aminohydroxylation and dihydroxylation using osmium(VIII) oxidants enabled the short and efficient synthesis of the aminocyclitol core of hygromycin A. In addition to allowing the selective introduction of the heteroatoms N and O, the use of osmium (via an osmate ester) as a protecting group for a 1,2-glycol is also reported. This tactic allowed efficient differentiation of otherwise equivalent hydroxyl groups and allowed us to complete the synthesis in short order (14 steps) and excellent overall yield (12%).     

Quantitative determination of selected compounds in a Kentucky 1R4F reference cigarette smoke by multidimensional gas chromatography and selected ion monitoring-mass spectrometry

Eight compounds from a Kentucky 1R4F reference cigarette smoke condensate have been determined by selected ion monitoring-mass spectrometry (SIM-MS) to confirm the validity of multidimensional gas chromatography (MDGC) as a quantitative tool in complex mixture analyses. Four electrostatically precipitated smoke condensate samples of 100 cigarettes each are dissolved individually in 25 mL of 2-propanol. The 2-propanol contains two methyl esters (C8 and C14) and seven deuterium-labeled compounds used as internal standards (IS). Analysis of the compounds of interest, pyridine; acetamide; acrylamide; phenol; o-, m-, and p-cresol; and quinoline, is accomplished by using two heartcuts. Heartcut times of the MDGC analysis are selected such that at least one IS is transferred with each group of compounds being analyzed. This study shows that the MDGC technique previously developed and described can be used for quantitative analyses. A comparison is made between the two types of internal standards. The results obtained for both types of internal standards agree within 20% of each other, on the average, with higher standard deviations for approximately 60% of the compounds where methyl esters are used as internal standards.     

<Emphasis Type="Italic">Brønsted</Emphasis> Acids in Ionic Liquids: Fundamentals,Organic Reactions,and Comparisons

Summary. A background for studying acids in various solvents is developed, emphasizing the importance of knowing to what extent a solvent conducts electricity and is therefore ionized, the dissociation equilibria of common molecular solvents and the acidic and basic species generated by solvent leveling. Acidity measurements in the atypical solvent water are discussed and the common method of expressing acidity in other systems – by Hammett values – is introduced. Representative examples of reactions involving Br?nsted acids in ionic liquids are presented and attention paid to the questions of speciation and acidity values. It is found that the gas phase proton affinity of a base is often a better guide to the acidity of its conjugate acid in an ionic liquid than is the dissociation constant of the said acid in water.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

PHOTOSENSITIZATION OF MURINE TUMOR, VASCULATURE and SKIN BY 5-AMINOLEVULINIC ACID-INDUCED PORPHYRIN

Abstract— The effects of topical and systemic administration of 5-aminolevulinic acid (ALA) were examined in several murine tumor systems with regard to porphyrin accumulation kinetics in tumor, skin and blood, vascular and tumor cell photosensitization and tumor response after light exposure. Marked, transient increases in porphyrin levels were observed in tumor and skin after systemic and topical ALA. Rapid, transient, dose-dependent porphyrin increases were also observed in blood; these were pronounced after systemic ALA injection and mild after topical application. They were highest within 1 h after ALA injection, thereafter declining rapidly. This matched the clearing kinetics of injected exogenous protoporphyrin IX (PpIX). Initially, vascular photosensitivity changed inversely to blood porphyrin levels, increasing gradually up to 5 h post-ALA, as porphyrin was clearing from the bloodstream. This pattern was again matched by injected, exogenous PpIX. After therapeutic tumor treatment vascular disruption of the tumor bed, while observed, was incomplete, especially at the tumor base. Minimal direct tumor cell kill was found at low photodynamic therapy (PDT) doses (250 mg/kg ALA, 135 J/cm² light). Significant, but limited (<1 log) direct photodynamic tumor cell kill was obtained when the PDT dose was raised to 500 mg/kg systemic ALA, followed 3 h later by 270 J/cm², a dose that was however toxic to the animals. The further reduction of clonogenic tumor cells over 24 h following treatment was moderate and probably limited by the incomplete disruption of the vasculature. Tumor responses were highest when light treatment was carried out at the time of highest tumor porphyrin content rather than at the time of highest vascular photosensitivity. Tumor destruction did not reach the tumor base, regardless of treatment conditions.