Green photoluminescence from platinum(II) complexes bearing silylacetylide ligands

The synthesis, structural characterization, photoluminescence properties, and density functional theory analysis of three Pt(II) diimine complexes, Pt(dbbpy)(C triple bond CR)2 [dbbpy = 4,4'-di(tert-butyl-2,2'-bipyridine; R = -SiMe3, -CC-SiMe3, or -t-Bu], are presented. The Pt(dbbpy)(C triple bond C-tBu)2 complex serves as a carbon-based ligand structure for which the photophysical properties of the two silicon-bearing complexes are compared in dichloromethane. Pt(dbbpy)(C triple bond C-SiMe3)2 and Pt(dbbpy)(C triple bond C-C triple bond C-SiMe3)2 display visible absorptions with strong green emission (lambda(emmax) = 526 and 524 nm, respectively) while Pt(dbbpy)(C triple bond C-t-Bu)2 displays efficient, long-lived yellow emission (lambda(emmax) = 557 nm). Direct side by side comparisons of Pt(dbbpy)(C triple bond C-SiMe3)2 and Pt(dbbpy)(C triple bond C-t-Bu)2 suggest that the difference in excited state energy results from the relative sigma-donor strength of the acetylide ligands.     

Time-dependent density functional theory study of the spectroscopic properties related to aggregation in the platinum(II) biphenyl dicarbonyl complex

Singlet ground-state geometry optimization of the monomer, four dimers, and the trimer of [Pt(bph)(CO)(2)], where bph = biphenyl dianion, was performed at the B3LYP level of density functional theory (DFT) with a mixed basis set (6-311G** on C, O, and H atoms; the Stuttgart/Dresden (SDD) effective core potential (ECP) on the Pt core; [6s5p3d] on the Pt valence shell). The aggregation was based on Pt[bond]Pt binding as well as on pi[bond]pi and electrostatic interactions. The lowest-lying triplet-state geometries of the monomer, one dimer, and the trimer of the complex were also optimized using the above theory. Significant shortening of the Pt[bond]Pt bond was recorded in the triplet state compared to the singlet one. A number of low-energy singlet and triplet allowed excited states were calculated using time-dependent density functional theory (TDDFT) and analyzed with respect to absorption, excitation, and emission spectra collected under various conditions. Simulated spectra of the monomer and dimer based on the singlet excited states were correlated with the absorption spectrum. The emission in concentrated solution was due to the triplet dimer, and the emitting states were (3)MLCT and Pt-centered states.     

Quenching of Flame Propagation with Heat Loss

The steady propagation of a planar laminar premixed flame, with a one-step exothermic reaction and linear heat loss, is studied. The corresponding travelling wave equations are solved numerically. The dependence of the flame velocity on the heat loss parameter is determined and compared with known results obtained by asymptotic expansion and other approximations. Due to the introduction of an ignition temperature the problem can be reduced to a bounded interval (of length L) and the graph of flame speed versus heat loss parameter can be parametrised by L. The numerical method is tested in the case of a step function nonlinearity when the exact solution of the differential equations can also be calculated.     

The adsorption of triethylenediamine on Al(2)O(3)-II: hydrogen bonding to Al-OH groups

The hydrogen bonding of the triethylenediamine (TEDA) molecule to isolated Al-OH groups on partially dehydroxylated high area gamma-Al(2)O(3) powder has been studied using transmission IR spectroscopy. It has been found that TEDA adsorbs both singly and as multiple species to single Al-OH groups in clearly separable equilibrium stages of adsorption at 300 K. The reversible adsorption of a single TEDA molecule to Al-OH fits the Langmuir adsorption isotherm well, and the enthalpy of adsorption is found to be -15.6 +/- 0.5 kJ mol(-1) in the range of fractional coverage of 0.5-0.6. Red shifts of the Al-OH frequency from approximately -200 cm(-1) to approximately -1000 cm(-1) are observed as a result of -OH bonding to the N lone pair in the TEDA molecule.     

Metal speciation measurement by diffusive gradients in thin films technique with different binding phases

Since its invention in the mid-1990s, the diffusive gradients in thin films (DGT) technique has rapidly become one of the most promising in situ sampling techniques for trace metal measurement in natural waters. We investigated here the possibility of using DGT devices with different binding phases to determine different DGT labile fractions of Cd and Cu in laboratory solutions and in natural waters. Several binding phases were studied, including conventional Chelex 100 resin imbedded polyacrylamide hydrogel (Chelex) and several recently developed binding phases, poly(acrylamide-co-acrylic acid) (PAM-PAA) gel, poly(acrylamidoglycolic acid-co-acrylamide) (PAAG-PAM) gel, Whatman P81 cellulose phosphate ion-exchange membrane (P81), and poly(4-styrenesulfonate) (PSS) aqueous solution. Laboratory testing in metal solutions spiked with EDTA or humic acid suggested that all the DGT devices measured only free metal ions and inorganic metal complexes. Upon field testing at both freshwater and seawater sites it was found that the DGT labile metal concentrations measured by different binding phases can be significantly different, suggesting that the DGT labile metal fractions were dependent on binding strength of the binding phase. By designing binding phases that can compete with different natural water complexing ligands to varying extents, it is possible to use these different DGT devices to measure metal speciation in natural waters.     

A Novel Synthesis of tert- Alkyl Sulfides

tert- Alkyl sulfides are conveniently prepared from α-(1H-benzotriazol-1-yl)alkyl sulfides by displacement of the 1H-benzotriazol-1-yl group with Grignard reagents. The 1-[α-(alkylthio)alkyl]- and 1-[α-(arylthio)alkyl]-1H-benzotriazole intermediates are easily available by several routes: (i) displacement of the halogen from appropriate halides by sodium salts of thiols, (ii) condensation of 1H-benzotriazole and thiols with carbonyl compounds, or (iii) lithiation of N-substituted 1H-benzotriazoles and subsequent treatment with electrophiles.     

Ab initio studies on several species of the formula X3YO and X3YOH

Ab initio molecular orbital calculations using both minimal and extended basis sets have been applied to two isoelectronic sets of molecules. One set corresponds to the 18 electron species H₃NO, H₃CO^– and H₃COH while the second set contains the 42 electron fluorinated molecules F₃NO, F₃CO^– and F₃COH. The geometries of these molecules have been optimized, using both the minimal STO-3G and the extended 4-31G basis sets. These comparative calculations reveal that the 4-31G basis produced structural parameters in much better agreement with experiment. The effect of includingd-orbitals in the basis set was also investigated. For the fluorinated oxides it has been found that the optimized 4-31G structures were only slightly altered by the addition ofd-orbitals. For H₃NO, on the other hand, the inclusion ofd-orbitals considerably shortens the N-O bond distance. Both H₃NO and CF₃OH, which are unknown experimentally, are theoretically predicted to be capable of existence. The electronic structures of these molecules have also been examined using electronic partitioning according to the Mulliken scheme.     

Metal complexes of the diuretic drug furosemide

New complexes of the formulaeM(fur)₂·2H₂O (M = Mn, Cu, Zn),M(fur)₂·3H₂O (M = Co, Ni, Cd), Hg₂(fur)₃Cl₂·2H₂O, Pd(fur)Cl·H₂O and Rh(fur)₃·3H₂O, wherefurH = 4-chloro-N-(2-furfuryl)-5-sulfamoylanthranilic acid, have been prepared and characterized by conductivity measurements, X-ray powder patterns, thermal methods, effective magnetic moments as well as by IR, ligand field,¹H-NMR and ESR spectroscopic studies. The anionfur ^– shows a chelated bidentate O(carboxylato), N(imino)-coordinating behaviour.

---

Metallkomplexe der diuretischen Droge Furosemid

Zusammenfassung Neue Komplexe der Verbindungen:M(fur)₂·2H₂O (M = Mn, Cu, Zn),M(fur)₂·3H₂O (M = Co, Ni, Cd), Hg₂(fur)₃Cl₂·2H₂O, Pd(fur)Cl·H₂O und Rh(fur)₃·3H₂O, wobeifurH 4-chlor-N-(2-furfuryl)-5-sulfamoylanthanilsäure ist, wurden dargestellt. Die Komplexe wurden durch Leitfähigkeitsmessungen, Röntgen-Pulver-Aufnahmen, thermogravimetrische Analysen, Messungen des effektiven magnetischen Dipolemomentes sowie durch spektroskopische Untersuchungen (IR,¹H-NMR und ESR) charakterisiert. Das Anionfur ^– zeigt das Verhalten einer Chelat-bidentat-O(carboxylato),N(imino)-Koordination.

     

Facilitated transport from ternary cation mixtures through water—chloroform—water membrane systems containing macrocyclic ligands

Cation fluxes were determined for various three-component, equimolar mixtures of alkali metal, alkaline earth, and Pb²⁺ cations in a H₂O---CHCl₃---H₂O liquid membrane system incorporating macrocyclic polyethers as carriers. Carrier ligands studied were 18-crown-6, dicyclohexano-18-crown-6, 1,10-diaza-18-crown-6, 21-crown-7, dibenzo-24-crown-8, and cryptand [2.2.2]. Correlations were found between transport and relative cation:polyether cavity radii, the type of substituents present on the polyether ring, and the type and number of donor atoms present. All the ligands studied transported Pb²⁺ at higher rates than the other Mⁿ⁺ in the mixtures. Transport behavior in these multi-cation systems can be predicted from Mⁿ⁺—polyether complex stability constant data in most cases.     

Effect of nicotine on the chemiluminescence of lucigenin in model membrane structures

The chemiluminescence of the classical lucigenin light reaction is adversely affected by nicotine in didodecyldimethylammonium bromide bilayer lamelar aggregates. The ratio of chemiluminescence quantum yields in the oriented medium, with and without nicotine, is equal to e^{–0.571[Nicotine]} whereas in the homogenous medium, the same ratio is equal to e^{–0.214[Nicotine]}. Furthermore, the appearance of the primary emitter's (N-methylacridone) emission in the chemiluminescence spectrum, already observed in oriented systems, is strongly supressed by nicotine.

---

Der Effekt von Nikotin auf die Chemilumineszenz von Lucigenin in Modellmembranen

Zusammenfassung Die Chemilumineszenz der klassischen Lucigenin-Lichtreaktion wird von Nikotin in Didodecyldimethylammoniumbromid-Lamellaraggregaten geschwächt. Das Verhältnis der Chemilumineszenzquantenausbeuten ist in orientiertem Medium — mit oder ohne Nikotin — e^{–0,571[Nikotin]}, in homogenem Medium jedoch e^{–0,214[Nikotin]}. Außerdem wird die Emission des Primäremitters (N-Methylacridon) im Chemilumineszenzspektrum von Nikotin stark unterdrückt.