Field evaluations of the VDmax approach for substantiation of a 25 kGy sterilization dose and its application to other preselected doses

The International and European standards for radiation sterilization require evidence of the effectiveness of a minimum sterilization dose of 25 kGy but do not provide detailed guidance on how this evidence can be generated. An approach, designated VD_max, has recently been described and computer evaluated to provide safe and unambiguous substantiation of a 25 kGy sterilization dose. The approach has been further developed into a practical method, which has been subjected to field evaluations at three manufacturing facilities which produce different types of medical devices. The three facilities each used a different overall evaluation strategy: Facility A used VD_max for quarterly dose audits; Facility B compared VD_max and Method 1 in side-by-side parallel experiments; and Facility C, a new facility at start-up, used VD_max for initial substantiation of 25 kGy and subsequent quarterly dose audits. A common element at all three facilities was the use of 10 product units for irradiation in the verification dose experiment.

The field evaluations of the VD_max method were successful at all three facilities; they included many different types of medical devices/product families with a wide range of average bioburden and sample item portion values used in the verification dose experiments. Overall, around 500 verification dose experiments were performed and no failures were observed. In the side-by-side parallel experiments, the outcomes of the VD_max experiments were consistent with the outcomes observed with Method 1.

The VD_max approach has been extended to sterilization doses >25 and <25 kGy; verification doses have been derived for sterilization doses of 15, 20, 30, and 35 kGy. Widespread application of the VD_max method for doses other than 25 kGy must await controlled field evaluations and the development of appropriate specifications/standards.     

Influence of nano-structure on electrolytic properties in CeO2 based system

Doped ceria (CeO₂) compounds are fluorite type oxides that show oxygen ionic conductivity higher than yttria stabilized zirconia, in oxidizing atmosphere. In order to improve the conductivity, the effective index was suggested to maximize the oxygen ionic conductivity in doped CeO₂ based oxides. In addition, the true microstructure of doped CeO₂ was observed at atomic scale for conclusion of conduction mechanism. Doped CeO₂ had small domains (10-50 nm) with ordered structure in a grain. It is found that the electrolytic properties strongly depended on the nano-structural feature at atomic scale in doped CeO₂ electrolyte. This revised version was published online in August 2006 with corrections to the Cover Date.     

Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.     

On the analysis of mercuric nitrate in flue gas by GC-MS

Recent research has demonstrated that in a simulated flue gas stream containing NO(2) and SO(2) elemental mercury is initially captured on a carbon or manganese oxide sorbent. After approximately an hour, however, mercury breaks through relatively rapidly, and the volatile form of mercury emitted is an oxidized species. The volatile mercury species emitted from a granular MnO(2) sorbent was trapped in an impinger containing cold acetonitrile. Subsequent evaporation of 95% of the acetonitrile in a Kuderna-Danish apparatus and gas chromatography (GC) of the concentrate resulted in a single mercury-containing GC peak at 5.5 min; the retention time and mass spectrum of this compound matched exactly those of a standard mercury(II) nitrate hydrate, Hg(NO(3))(2).H(2)O dissolved in acetonitrile. The volatile mercury component analyzed from injection of this standard solution was shown to be a form of methylmercury that is produced in the GC column by reaction of the highly reactive mercury nitrate with the methylsiloxane GC phase. Because the on-column derivatization reaction seems to be unique to mercury nitrate, the GC-MS (gas chromatography-mass spectroscopic) analysis provides strong evidence for identification of the trapped oxidized mercury species as mercury nitrate although, because the nitrate becomes detached from the mercury atom in the on-column reaction, the identity is not proven.     

A novel scandium ortho-methoxynitrosobenzene-dimer complex: mechanistic implications for the nitroso-Diels-Alder reaction

Arylnitroso dienophiles exist in equilibrium with their dimeric counterparts, which in turn form stable bidentate complexes with scandium(III) triflate and react with cyclohexadiene to give the corresponding Diels-Alder adduct at the same rate as the normal thermal process.     

Hexaphosphapentaprismane: a new gateway to organophosphorus cage compound chemistry

Several independent synthetic routes are described leading to the formation of a novel unsaturated tetracyclic phosphorus carbon cage compound tBu4C4P6 (1), which undergoes a light-induced valence isomerization to produce the first hexaphosphapentaprismane cage tBu4C4P6 (2). A second unsaturated isomer tBu4C4P6 (9) of 1 and the bis-[W(CO)5] complex 13 of 1 are stable towards similar isomerization reactions. Another starting material for the synthesis of the hexaphosphapentaprismane cage tBu4C4P6 (2) is the trimeric mercury complex [(tBu4C4P6)Hg]3 (11), which undergoes elimination of mercury to afford the title compound 2. Single-crystal X-ray structural determinations have been carried out on compounds 1, 2, 9, 11, and 13.     

Quenching of Flame Propagation with Heat Loss

The steady propagation of a planar laminar premixed flame, with a one-step exothermic reaction and linear heat loss, is studied. The corresponding travelling wave equations are solved numerically. The dependence of the flame velocity on the heat loss parameter is determined and compared with known results obtained by asymptotic expansion and other approximations. Due to the introduction of an ignition temperature the problem can be reduced to a bounded interval (of length L) and the graph of flame speed versus heat loss parameter can be parametrised by L. The numerical method is tested in the case of a step function nonlinearity when the exact solution of the differential equations can also be calculated.     

Flame ionization detection after splitting the water effluent in subcritical water chromatography

The coupling of subcritical water separation with flame ionization detection (FID) in the split mode has been investigated in this study. In order to keep the FID system stable during subcritical water separation, a Tee union was connected between the separation column and the FID system to split the water flow. The ratio of the water flow to the FID system over the flow-rate to a waste bottle varied depending on the dimension of capillary tubings and the total water flow-rate used. Separations of several carbohydrates, carboxylic acids, and amino acids were performed on commercially available columns using a laboratory-made subcritical water chromatography-FID system. The FID system was very stable in this split mode even at total flow-rate as high as 1.24 ml/min. The linear dynamic range was up to three orders of magnitude and the limit of detection (LOD) ranged from 38 to 111 ng (306-925 ng/microl injected) with split ratios of approximately 1:10 to approximately 1:17 (FID/waste bottle) for several analytes studied. However, the LOD can be significantly lowered by adjusting the dimensions of the restrictors to allow a higher percentage of the total flow to the FID system.     

Toward a microchip-based solid-phase extraction method for isolation of nucleic acids

A silica-based solid-phase extraction system suitable for incorporation into a microchip platform (nu-total analytical system; nu-TAS) would find utility in a variety of genetic analysis protocols, including DNA sequencing. The extraction procedure utilized is based on adsorption of the DNA onto bare silica. The procedure involves three steps: (i) DNA adsorption in the presence of a chaotropic salt, (ii) removal of contaminants with an alcohol/water solution, and (iii) elution of the adsorbed DNA in a small volume of buffer suitable for polymerase chain reaction (PCR) amplification. Multiple approaches for incorporation of this protocol into a microchip were examined with regard to extraction efficiency, reproducibility, stability, and the potential to provide PCR-amplifiable DNA. These included packing microchannels with silica beads only, generating a continuous silica network via sol-gel chemistry, and combinations of these. The optimal approach was found to involve immobilizing silica beads packed into the channel using a sol-gel network. This method allowed for successful extraction and elution of nanogram quantities of DNA in less than 25 min, with the DNA obtained in the elution buffer fraction. Evaluation of the eluted DNA indicated that it was of suitable quality for subsequent amplification by PCR.