Comparison of denuder and impinger sampling for determination of gaseous toluene diisocyanate (TDI)

An air-sampling method employing denuders coated inside with a chemisorptive stationary phase has been evaluated for analysis of the hazardous gaseous 2,4 and 2,6 isomers of toluene diisocyanate (TDI). The denuder stationary phase consisted of polydimethylsiloxane (SE-30) to which dibutylamine (DBA) was added as a reagent for derivatization of TDI. The accuracy and precision of sampling by means of denuders were shown to differ only slightly from those of the established impinger method. The denuder method was, however, also shown to be suitable for long-term measurements (up to 8 h). The limit of determination (LOD) of the method, including LC-APCI-MS-MS analysis, was found to be 1.9 microg m(-3) and 1.2 microg m(-3) for 2,4- and 2,6-TDI, respectively, for short-term measurements (15 min). Significant lower LOD was obtained for long-term measurements. This is well below the Occupational Safety and Health Administration (OSHA) 8-h TWA (time-weighted average) exposure limit, which is 40 microg m(-3) for the sum of the TDI isomers. The denuder method was also found to be robust and easy to handle. The samplers can be prepared several days before sampling with no loss in performance. The contents of denuders should, on the other hand, be extracted immediately after sampling to prevent degradation of the isocyanate derivatives formed.     

An ab initio molecular orbital study of intramolecular H-bonding: 1,3 propanediol

An ab initio molecular orbital calculation has been carried out for three different conformations of 1,3 propanediol, one of which permits intramolecular H-bond studied by ab initio quantum mechanical methods. The ΔE for H-bonding formation is compated to be 0.9 kcal/mole and the charge redistributions and molecular orbital energy changes are compared to those found in intermolecular H-bonds.     

A flow-through cell for differential pulse anodic stripping voltammetry

A flow-through voltammetric cell with a hanging mercury drop electrode has been developed to fit the static mercury drop electrode (PAR 303). The design has resulted in a linear increase of sensitivity with flow rate and an enhancement of sensitivity by the wall-jet effect. The cell is used in a flow injection system in which samples are introduced with a R??i?ka—Hansen injector. The mercury drop is held at plating potentials while the sample peak passes through the cell. Stripping is done under stopped flow conditions, to reduce noise, after the sample has been washed completely from the cell. The stripping thus takes place into the carrier electrolyte which always has a constant composition independent of sample constituents. Film-forming interfering species will, however, remain on the surface of the mercury drop. The effect of medium exchange on films produced by l-cysteine is reported. The flow-through medium exchange simplifies deaeration, speeds up analysis and reduces contamination.     

Time-resolved and steady-state fluorescence spectroscopic studies of the human lens with comparison to argpyrimidine,pentosidine and 3-OH-kynurenine

The intrinsic fluorescence from the human lens on excitation in the UV region, referred to as blue lens autofluorescence, increases with age or in the presence of diabetes. The present study reveals that the relative contribution of compounds responsible for the blue autofluorescence appears to be a constant with age. Three potential candidates for the blue fluorescence were also studied with respect to fluorescence spectroscopic properties. These were argpyrimidine and pentosidine, both advanced glycation end products, and 3-hydroxykynurenine (3-OH-kynurenine), a photooxidative derivative of tryptophan. It was shown that the spectral properties of argpyrimidine and pentosidine are compatible with the observed blue fluorescence of the human lens, whereas the fluorescence from 3-OH-kynurenine is negligible.     

Synthesis,characterization, and curing of hyperbranched allyl ether–maleate functional ester resins

A model two-step synthesis of a saturated hyperbranched hydroxyl-terminated ester has been developed to show a synthesis route. Three different series of hyperbranched esters with different terminations have been synthesized to relate some of their properties to their structures. This route has then been used to synthesize three different allyl ethermaleate functional hyperbranched ester resins in a two-step procedure. The resins have been characterized with respect to rheology, structure, and properties, and the differences are discussed. The allyl ether-maleate functional resins have also been studied with respect to curing performance and final film properties. © 1993 John Wiley & Sons, Inc.     

Testing shelled corn for aflatoxin, Part III: evaluating the performance of aflatoxin sampling plans

The effects of changes in sample size and/or sample acceptance level on the performance of aflatoxin sampling plans for shelled corn were investigated. Six sampling plans were evaluated for a range of sample sizes and sample acceptance levels. For a given sample size, decreasing the sample acceptance level decreases the percentage of lots accepted while increasing the percentage of lots rejected at all aflatoxin concentrations, and decreases the average aflatoxin concentration in lots accepted and lots rejected. For a given sample size where the sample acceptance level decreases relative to a fixed regulatory guideline, the number of false positives increases and the number of false negatives decreases. For a given sample size where the sample acceptance level increases relative to a fixed regulatory guideline, the number of false positives decreases and the number of false negatives increases. For a given sample acceptance level, increasing the sample size increases the percentage of lots accepted at concentrations below the regulatory guideline while increasing the percentage of lots rejected at concentrations above the regulatory guideline, and decreases the average aflatoxin concentration in the lots accepted while increasing the average aflatoxin concentration in the rejected lots. For a given sample acceptance level that equals the regulatory guideline, increasing the sample size decreases misclassification of lots, both false positives and false negatives.     

Synthesis and photophysics of one mononuclear Mn(III) and one dinuclear Mn(III,III) complex covalently linked to a ruthenium(II) tris(bipyridyl) complex

The preparation of donor (D)-photosensitizer (S) arrays, consisting of a manganese complex as D and a ruthenium tris(bipyridyl) complex as S has been pursued. Two new ruthenium complexes containing coordinating sites for one (2a) and two manganese ions (3a) were prepared in order to provide models for the donor side of photosystem II in green plants. The manganese coordinating site consists of bridging and terminal phenolate as well as terminal pyridyl ligands. The corresponding ruthenium-manganese complexes, a manganese monomer 2b and dimer 3b, were obtained. For the dimer 3b, our data suggest that intramolecular electron transfer from manganese to photogenerated ruthenium(III) is fast, k(ET) > 5 x 10(7) s(-)(1).     

Coordination around thorium(IV) in aqueous perchlorate,chloride and nitrate solutions

The coordination around the thorium(IV) ion in aqueous perchlorate, chloride and nitrate solutions has been determined from large angle X-ray scattering measurements. In perchlorate solutions, where inner-sphere complexes are not formed, the first coordination sphere contains 8.0±0.5 water molecules with Th-H₂O bond lengths of 2.48₅ Å. In chloride solutions inner-sphere complexes are formed, which lead to an increase in the coordination number. In nitrate solutions the nitrate ions are bonded as bidentate ligands to the thorium ion. The bond lengths are similar to those found in crystalline hydrates of thorium nitrate. The coordination numbers found for thorium(IV) in solution are compared with previously reported values for lower charged ions of similar size.On leave from Department of Inorganic Chemistry Royal Institute of Technology S-10044 Stockholm Sweden     

Structure determination of zinc iodide complexes formed in aqueous solution

Structures of the complexes formed in aqueous solutions between zinc(II) and iodide ions have been determined from large-angle X-ray scattering, Raman and far-IR measurements. The coordination in the hydrated Zn²⁺ hexaaqua ion and the first iodide complex, [ZnI]⁺, is octahedral, but is changed into tetrahedral in the higher complexes, [ZnI₂(H₂O)₂], [ZnI₃(H₂O)]^– and [ZnI₄]^2–. The Zn-I bond length is 2.635(4)Å in the [ZnI₄]^2– ion and slightly shorter, 2.592(6)Å, in the two lower tetrahedral complexes. In the octahedral [ZnI(H₂O)₅]⁺ complex the Zn-I bond length is 2.90(1)Å. The Zn-O bonding distances in the complexes are approximately the same as that in the hydrated Zn²⁺ ion, 2.10(1)Å.     

Addition of palladium and platinum tri-tert-butylphosphine groups to Re-Sn and Re-Ge bonds

The reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3SnH at 68 degrees C yielded the new compound Re2(CO)8(mu-SnPh2)2 (10) which contains two SnPh2 ligands bridging two Re(CO)(4) groups, joined by an unusually long Re-Re bond. Fenske-Hall molecular orbital calculations indicate that the bonding in the Re2Sn2 cluster is dominated by strong Re-Sn interactions and that the Re-Re interactions are weak. The 119Sn M?ssbauer spectrum of 10 exhibits a doublet with an isomer shift (IS) of 1.674(12) mm s(-1) and a quadrupole splitting (QS) of 2.080(12) mm s(-1) at 90 K,characteristic of Sn(IV) in a SnA2B2 environment. The IS is temperature dependent, -1.99(14) x 10(-4) mm s(-1) K(-1); the QS is temperature independent. The temperature-dependent properties are consistent with the known Gol'danskii-Kariagin effect. The germanium compound Re2(CO)8(mu-GePh2)2 (11) was obtained from the reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3GeH. Compound 11 has a structure similar to that of 10. The reaction of 10 with Pd(PBu(t)3)2 at 25 degrees C yielded the bis-Pd(PBu(t)3) adduct, Re2(CO)8(mu-SnPh2)2[Pd(PBu(t)3)]2 (12); it has two Pd(PBu(t)3) groups bridging two of the four Re-Sn bonds in 10. Fenske-Hall molecular orbital calculations show that the Pd(PBu(t)3) groups form three-center two-electron bonds with the neighboring rhenium and tin atoms. The mono- and bis-Pt(PBu(t)3) adducts, Re2(CO)8(mu-SnPh2(2)[Pt(PBu(t)3)] (13) and Re2(CO)8(mu-SnPh2)2[Pt(PBu(t)3)]2 (14), were formed when 10 was treated with Pt(PBu(t)3)2. A mono adduct of 11, Re2(CO)8(mu-GePh2)2[Pt(PBu(t)3)] (15), was obtained similarly from the reaction of 11 with Pt(PBu(t)3)2.