Polymer-assisted laser desorption/ionization analysis of small molecular weight compounds

The use of non-polar, small polymers as matrices for the analysis of low molecular weight compounds in polymer-assisted laser desorption/ionization mass spectrometry (PALDI-MS) is demonstrated. The matrices evaluated were either based on an oligothiophene or a benzodioxin backbone. Metallocenes, polycyclic hydrocarbons, a fluorosurfactant, and a subset of small organic compounds with various functionalities, served as model analytes. The mechanism of ionization charge transfer is discussed and ionization potentials for the matrices in the study have been estimated using density functional theory (DFT) calculations. Some of the results are possibly contradictory to the generally accepted limiting conditions for gas-phase charge-transfer reactions. These results are interpreted in the light of energy pooling. Also a new mass calibration procedure for the low-mass region in positive ion mode is presented, and some aspects of the ionization/desorption process leading to radical cations are studied.     

A model explaining declining rate in hydrolysis of lignocellulose substrates with cellobiohydrolase I (cel7A) and endoglucanase I (cel7B) of Trichoderma reesei

It is commonly observed that the rate of enzymatic hydrolysis of solid cellulose substrates declines markedly with time. In this work the mechanism behind the rate reduction was investigated using two dominant cellulases of Trichoderma reesei: exoglucanase Cel7A (formerly known as CBHI) and endoglucanase Cel7B (formerly EGI). Hydrolysis of steam-pretreated spruce (SPS) was performed with Cel7A and Cel7B alone, and in reconstituted mixtures. Throughout the 48-h hydrolysis, soluble products, hydrolysis rates, and enzyme adsorption to the substrate were measured. The hydrolysis rate for both enzymes decreases rapidly with hydrolysis time. Both enzymes adsorbed rapidly to the substrate during hydrolysis. Cel7A and Cel7B cooperate synergistically, and synergism was approximately constant during the SPS hydrolysis. Thermal instability of the enzymes and product inhibition was not the main cause of reduced hydrolysis rates. Adding fresh substrate to substrate previously hydrolyzed for 24 h with Cel7A slightly increased the hydrolysis of SPS; however, the rate increased even more by adding fresh Cel7A. This suggests that enzymes become inactivated while adsorbed to the substrate and that unproductive binding is the main cause of hydrolysis rate reduction. The strongest increase in hydrolysis rate was achieved by adding Cel7B. An improved model is proposed that extends the standard endo-exo synergy model and explains the rapid decrease in hydrolysis rate. It appears that the processive action of Cel7A becomes hindered by obstacles in the lignocellulose substrate. Obstacles created by disordered cellulose chains can be removed by the endo activity of Cel7B, which explains some of the observed synergism between Cel7A and Cel7B. The improved model is supported by adsorption studies during hydrolysis.     

Capillary electrophoretic detection in apolipoprotein E genotyping

We describe the application of capillary electrophoresis to detect DNA fragments, obtained after amplifying a part of the apolipoprotein E (apoE) gene with polymerase chain reaction (PCR). Compared to conventional agarose slab gel electrophoresis (AGE), CE appears the method of choice with regard to resolution and sensitivity, to detect DNA fragments in the range of 20-100 base pairs. Especially discrimination between apoE2/E2 and apoE2/E3 genotypes is more reliable with CE than with AGE, this being of great clinical value in the diagnosis of familiary dysbetalipoproteinemia.     

PHOTOINDUCED DEGRADATION AND MODIFICATION OF PHOTOFRIN II IN CELLS in vitro

Abstract— Human cells of the line NHIK 3025 were incubated with Photofrin II (PII) and exposed to light. Fluorescence- and absorption spectra of PII in the cells were measured. Light exposure resulted in a degradation of PII in the cells and changes in the shape of the fluorescence spectra. These changes are probably partly due to a photochemical modification of PII and to a relocalization of PII in the cells. Notably, a destruction of binding sites for PII on or close to proteins was caused by the light exposure. The rate of the light-induced decay of the porphyrin fluorescence intensity was only slightly increasing with the PII concentration, indicating that each porphyrin molecule is mainly degraded by photoproducts originating from itself. On the other hand, the rate of the degradation of porphyrin binding sites on the proteins increased with increasing PII concentrations.
The excitation spectrum of PII in cells has a peak at285–290 nm attributed to energy transfer from proteins to porphyrins located close to the proteins. The intensity of this peak relative to the intensity of the Soret band increases with decreasing porphyrin concentrations. This might indicate that some of the binding sites close to proteins have a higher affinity for the porphyrin than binding sites at longer distances from the proteins.     

Small-volume radial flow cell for all-solid-state ion-selective electrodes

A flow cell with a radial distribution of four all-solid-state ion selective electrodes (ISEs), or alternatively three ISEs and one reference electrode, was designed and optimized for mass production. The radial distribution of the electrodes reduces the cell volume and is expected to minimize cross-contamination between different electrodes. Two different cell prototypes were developed and tested for all-solid-state K⁺-ISEs based on a solvent polymeric ion-selective membrane (ISM) and a conducting polymer, poly(3,4-ethylenedioxythiophene), as solid internal contact. In the first prototype, PEDOT was electropolymerized from an aqueous solution of the monomer and the doping ion salt, sodium polystyrenesulfonate (NaPSS). The second prototype employed an aqueous dispersion of PEDOT(PSS) that is commercially available (Baytron P, Bayer AG). Compared to electrochemical synthesis, solution casting of the polymer dispersion was found to be a more advantageous method to deposit the conducting polymer layer aiming at mass production. The resulting prototypes of the flow cell had a small volume (ca. 17-37 μl), which makes them suitable for application in clinical analysis.     

Metastable ion studies. IV—thermochemistry and ion structures among fragmenting [C3H6]+· ions

Metastable ion peak shapes, dimensions and relative abundances have been measured for the three fragmentations [C₃H₆]⁺· → [C₃H₄]⁺· + H₂, [C₃H₆]⁺· → [C₃H₅]⁺ + H· and [C₃H₆]⁺· → [C₃H₃]⁺ + H₂ + H·. [C₃H₆]⁺· ions were derived from propene, cyclopropane, tetrahydrofuran, cyclohexanone, 2-methyl but-1-ene and cis-pent-2-ene. Activation energies for these fragmentations have been evaluated. Three daughter ion dissociations ([C₃H₅]⁺ → [C₃H₃]⁺ + H₂, [C₃H₅]⁺ → [C₃H₄]⁺· + H· and [C₃H₄]⁺· → [C₃H₃]⁺ + H·) have been similarly examined. Ion structures have been determined and the metastable energy releases have been correlated with the thermochemical data. It is concluded that the molecular ions of propene and cyclopropane become structurally indistinguishable prior to fragmentation and that differences in their metastable ion characteristics can be ascribed wholly to internal energy differences; the latter can be correlated with the photoelectron spectra of the isomers. The pathway for the consecutive fragmentation which generates the metastable ion peak (m/e 42 → m/e.39) has been shown to be It is likewise concluded that fragmentating [C₃H₆]⁺· ions generated from the various precursor molecules are also structurally indistinguishable and cannot be classified with either molecular ion of the isomeric C₃H₆ hydrocarbons.     

PRIMARY DNA DAMAGE, HPRT MUTATION AND CELL INACTIVATION PHOTOINDUCED WITH VARIOUS SENSITIZERS IN V79 CELLS

DNA strand breaks and hypoxanthine guanine phosphoribosyl transferase (HPRT) mutants were measured in parallel in photochemically treated (PCT) cells and compared at the same level of cell survival. Chinese hamster fibroblasts (V79 cells) were either incubated with the lipophilic dyes tetra(3—hydroxyphenyl)porphyrin (3THPP) and Photofrin II (PII), the anionic dye meso -tetra(4—sulfonatophenyl)porphine (TPPS₄) or the cationic dye meso -tetra( N -methyl-4-pyridyl)porphine ( p -TMPyPH₂ before light exposure. In the cells, the lipophilic dyes were localized in membranes, including the nuclear membrane, while the hydrophilic dyes were taken up primarily into spots in the cytoplasm. In addition, the hydrophilic TPPS₄ was distributed homogeneously throughout the whole cytoplasm and nucleoplasm. According to the HPRT mutation test, the mutagenicity of light doses survived by 10% of the cells was a factor of six higher in the presence of 3THPP than of PII, whereas for X-rays it was a factor of three higher than for PCT with 3THPP. Light exposure in the presence of the hydrophilic dyes TPPS₄ and p -TMPyPH₂ was not significantly mutagenic. There was no correlation between the induced rates of HPRT mutants and of DNA strand breaks. Thus, TPPS₄ was the most efficient sensitizer with regard to DNA strand breaks when compared at the same level of cell survival, followed by 3THPP, PII and p -TMPyPH₂. Hence, the rate of DNA strand breaks cannot be used to predict the mutagenicity of PCT.     

Interactions between synthetic and indigenous naphthenic acids and divalent cations across oil–water interfaces: effects of addition of oil-soluble non-ionic surfactants

Interactions between naphthenic acids and divalent metal cations across model oil–alkaline water interfaces were investigated by correlating changes in dynamic interfacial tension (IFT), to plausible reaction mechanisms. The measurements were carried out by using a CAM 200 optical instrument, which is based on the pendant drop technique. The naphthenic acids used were synthesised model compounds as well as commercial acid mixtures from crude distillation and extracted acid fractions from a North Sea crude oil. The divalent cations involved Ca²⁺, Mg²⁺, Sr²⁺, and Ba²⁺, which are all common in co-produced formation water and naphthenate deposits. The results show that the dynamic IFT strongly depends on naphthenic acid structure, type of divalent cation, and the concentration of the compounds as well as the pH of the aqueous phase. Introducing divalent cations to systems involving saturated naphthenic acids caused mostly a permanent lowering of the IFT. The decline in IFT is due to electrostatic attraction forces across the interface between the cations in the aqueous phase and the carboxylic-groups at the o/w interface, which cause a higher interfacial density of naphthenic acid monomers. The permanent lowering in IFT is likely due to formation of positively charged monoacid complexes, which possess high interfacial activity. On the other hand, in the case of the aromatic model compounds, the cations affected the IFT differently. This is mainly discussed in light of degree of cation hydration and steric conditions. Various oil-soluble non-ionic surfactant mixtures were also introduced to systems involving a model naphthenic acid and Ca²⁺ in order to investigate how the interfacial competition affected the local interactions. Based on the behaviour of dynamic IFT, probable inhibition mechanisms are discussed.Electronic Supplementary Material Supplementary material is available for this article at     

A variation principle for energy differences between states of two different Hamiltonians

A modification of a variation principle due to Delves, is derived which permits the direct calculation of energy differences between states of two different Hamiltonians: [Δ ??] = 〈X₀| ??_x – W_x|X₁〉 – 〈Y₀|??_y – W_y|y₁〉 + 〈X₀| Δ ??|Y₀〉 · 〈X₀| Y₀〉^?1. Δ ?? = ??_y – ??_x, |X₀〉 and |Y₀〉 are the wave functions for the X and Y states and |X₁〉 and |Y₁〉 are functions defined in the text. The principle is applied to a few simple examples.     

4‐Methyl‐2‐[N‐(3,4‐methyl­ene­dioxy­benzyl­idene)hydrazino]­thia­zole and its reduction product, 4‐methyl‐2‐[N‐(3,4‐methyl­ene­dioxybenzyl­idene)hydrazono]‐4,5‐di­hydro­thia­zole

The crystal structures of 4‐methyl‐2‐[N‐(3,4‐methyl­ene­dioxybenzyl­idene)hydrazino]­thia­zole, C₁₂H₁₁N₃O₂S, and its reduction product 4‐methyl‐2‐[N‐(3,4‐methyl­ene­dioxybenzyl­idene)hydrazono]‐4,5‐di­hydro­thia­zole, C₁₂H₁₃N₃O₂S, have been determined and compared. In the reduction product, the tautomer observed bears an H atom on the exocyclic N atom. Both compounds form hydrogen‐bonded dimers over centers of inversion.