Impact of sugar stereochemistry on natural killer T cell stimulation by bacterial glycolipids

Natural killer T (NKT) cells recognize glycolipids produced by Sphingomonas bacteria, and these glycolipids contain C6-oxidized sugars, either glucuronic acid or galacturonic acid, linked to ceramides. Glycolipids with gluco stereochemistry are the most prevalent. Multiple studies have demonstrated that galactosylceramides are more potent stimulators of NKT cells than their glucose isomers. To determine if this stereoselectivity is retained in the context of the C6-oxidized sugars found in bacterial glycolipids, we prepared two sets of gluco and galacto-glycolipids oxidized at their C6 positions and compared their NKT stimulatory properties. In the context of carboxylic acid groups at C6, gluco stereochemistry gave the more potent responses. We also prepared bacterial glycolipids containing more complex ceramide groups to determine if these chains impact NKT cell responses.     

Photoelectron spectroscopy of isolated multiply negatively charged oligonucleotides

Ultraviolet photoelectron spectroscopy in an ion beam was used to investigate the electronic properties of isolated DNA oligonucleotides [dA(5)-4H](4-) and [dT(5)-4H](4-), carrying four excess negative charges. We find the fourth adiabatic electron affinity to be slightly negative for [dA(5)-4H](4-), while it is positive for [dT(5)-4H](4-). This implies a significant influence of the base composition on energetics, which is in turn relevant for analytic applications and also for charge transport properties.     

Straightforward Approach for Preparing Durable Antibacterial ZnO Nanoparticle Coatings on Flexible Substrates

Flexible antibacterial materials have gained utmost importance in protection from the distribution of bacteria and viruses due to the exceptional variety of applications. Herein, we demonstrate a readily scalable and rapid single-step approach for producing durable ZnO nanoparticle antibacterial coating on flexible polymer substrates at room temperature. Substrates used are polystyrene, poly(ethylene-co-vinyl acetate) copolymer, poly(methyl methacrylate), polypropylene, high density polyethylene and a commercial acrylate type adhesive tape. The deposition was achieved by a spin-coating process using a slurry of ZnO nanoparticles in toluene. A stable modification layer was obtained when toluene was a solvent for the polymer substrates, namely polystyrene and poly(ethylene-co-vinyl acetate). These coatings show high antibacterial efficiency causing >5 log decrease in the viable counts of Gram-negative bacteria Escherichia. coli and Gram-positive bacteria Staphylococcus aureus in 120 min. Even after tapping these coated surfaces 500 times, the antibacterial properties remained unchanged, showing that the coating obtained by the presented method is very robust. In contrast to the above findings, the coatings are unstable when toluene is not a solvent for the substrate.     

Synthese,Struktur und einige Reaktionen [N-(N′,N′,N″,N″-tetramethyl)-guanidinyl]-substituierter Phosphorylverbindungen

Synthesis, Structure, and some Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphoryl Compounds The tetramethylguanidinyl-substituted phosphoryl compounds 1 – 10 were prepared in the reaction of the appropriate chlorophosphoryl compounds with either N′,N′,N″,N″-tetramethylguanidine (HTMG) or N-trimethylsilyl-(N′,N′,N″,N″-tetramethyl)guanidine (TMSTMG). With methyl iodide 1 reacted with N-alkylation to give the ammonium salt 11. 1 reacted with BF₃ · Et₂O at both imino nitrogen atoms with formation of the bis-BF₃-adduct 12 . The X-ray structure determination of phenylphosphonic acid-bis(N′,N′,N″,N″-tetramethylguanidinide) 3 shows shortened PN-bonds and widened PNC-angles, consistent with the partial double bond character of the PN-bond.     

Total nucleotide analysis of Hydra DNA and RNA by MEKC with LIF detection and 32P‐postlabeling

The model organism Hydra has been used for molecular studies for more than 20 years, however, its DNA base composition has not been determined yet. We have analyzed DNA and total RNA of the freshwater polyp Hydra magnipapillata with two independent procedures of high accuracy and sensitivity – fluorescence labeling of nucleotides followed by CE‐LIF detection and ³²P‐postlabeling. DNA of Hydra was digested either to deoxyribonucleoside‐5′‐monophosphates or deoxyribonucleoside‐3′‐monophosphates selectively conjugated with the fluorescent dye 4,4‐difluoro‐5,7‐dimethyl‐4‐bora‐3a,4a‐diaza‐s‐indacene‐3‐propionyl ethylene diamine hydrochloride (BODIPY FL EDA) separated and detected using CE‐LIF. Both versions of the assay revealed a high A+T composition of 78 and 71%, whereas total DNA methylation (5‐methyldeoxycytidine) was 2.6 and 3.1%. Total Hydra RNA showed highest base levels for guanine (33%) and a level of 1.4% for pseudouracil. All values were in good agreement with those determined by the ³²P‐postlabeling method.     

Mechanistic studies of UV assisted [4 + 2] cycloadditions in synthetic efforts toward vibsanin E

Quantum chemical DFT calculations at the B3LYP/6-31G(d) level have been used to study the stereochemical course of the photochemical cycloaddition of enone 9 with dienes. The observed products of this photochemically induced cycloaddition showed a stereoselectivity, which is opposite to what would be expected by FMO considerations. The quantum chemical calculations revealed that the unusual stereoselectivity of the reaction can be rationalized by assuming a stereospecific photochemical cis-trans isomerization of enone 9 to trans isomer 9a followed by a thermal Diels-Alder reaction of the diene onto the highly reactive trans enone. The photochemical reaction step involves the selective formation of a twisted triplet intermediate, which accounts for the selectivity of the reaction.     

Theoretical investigation of the apparently irregular behavior of pt-pt nuclear spin-spin coupling constants

One-bond Pt-Pt nuclear spin-spin coupling constants J(Pt-Pt) for closely related dinuclear Pt complexes can differ by an order of magnitude without any obvious correlation with Pt-Pt distances. As representative examples, the spin-spin couplings of the dinuclear Pt(I) complexes [Pt(2)(CO)(6)](2+) (1) and [Pt(2)(CO)(2)Cl(4)](2-) (2) have been computationally studied with a recently developed relativistic density functional method. The experimental values are (1)J((195)Pt-(195)Pt) = 5250 Hz for 2 but 551 Hz for 1. Many other examples are known in the literature. The experimental trends are well reproduced by the computations and can be explained based on the nature of the ligands that are coordinated to the Pt-Pt fragment. The difference for J(Pt-Pt) of an order of magnitude is caused by a sensitive interplay between the influence of different ligands on the Pt-Pt bond, and relativistic effects on metal-metal and metal-ligand bonds as well as on "atomic orbital contributions" to the nuclear spin-spin coupling constants. The results can be intuitively rationalized with the help of a simple qualitative molecular orbital diagram.     

Cycloaddition mit ungesättigten Zuckern,VI Die Synthese Diastereomerer 4H-Pyrano [3, 4-d] Isoxazol-4-One

Abstract

By 1, 3-dipolar cycloaddition of benzonitrile oxide to 4, 6-di-O-acetyl-2, 3-dideoxy-D-erythro-hex-2-enono-1, 5-lactone (1), [3aR- (3aα, 6β,7α, 7aα)] - (2) and [3aS-(3aβ, 6β, 7α, 7aα)] -7- (acetyloxy) -6- (acetyloxymethyl) -3a, 6, 7, 7a-tetrahydro-3-phenyl-4H-pyrano [3, 4-d] isoxazole-4-one (3) were prepared in 58 and 7% yield respectively. From 2, [1′ R, 3aR-(3aα, 6β, 6aα)] -6-(1′, 2′-dihydroxymethyl)-6, 6a - dihydro-3-phenyl-furano [3, 4-d] isoxazole-4 (3aH) -one (5) was prepared by deacetylation. The structure of 3 was determined by X-ray analysis.     

Templated‐Assembly of CsPbBr3 Perovskite Nanocrystals into 2D Photonic Supercrystals with Amplified Spontaneous Emission

Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light‐management strategy involving additional processing steps. Herein, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr₃ perovskite NC colloids into large area (1 cm²) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr₃ 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This improvement is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal.