Characterization and study of microwave activation effects on the polystyrene tacticity

¹³C Nuclear magnetic resonance proved to be an advantageous tool to determine the stereoregularity of polystyrene polymers. The latter was achieved through the analysis of the signal of the quaternary carbon and that of the carbon-p in the aromatic ring too. Styrene was polymerized through microwaves and conventional heating activation using two different polymerization techniques: emulsion and bulk. Microwave activation was performed in a mono-modal type device under the following experimental conditions: various initiator concentrations, an average irradiation power of 50?W, temperature of 70°C, and using a batch reactor for emulsion and bulk experiments. The results obtained in these experiments were compared with those obtained by conventional heating activation polymerization under the same initiator concentration and temperature conditions. Microwave-activated reactions resulted in shorter reaction times and higher yields. The tacticity of the polymer samples was not significantly altered, which lead to the conclusion that, in this case, the stereoregularity of polystyrene was not influenced by microwave irradiation.     

Multivalent binding motifs for the noncovalent functionalization of graphene

Single-layer graphene is a newly available conductive material ideally suited for forming well-defined interfaces with electroactive compounds. Aromatic moieties typically interact with the graphene surface to maximize van der Waals interactions, predisposing most compounds to lie flat on its basal plane. Here we describe a tripodal motif that binds multivalently to graphene through three pyrene moieties and projects easily varied functionality away from the surface. The thermodynamic and kinetic binding parameters of a tripod bearing a redox-active Co(II) bis-terpyridyl complex were investigated electrochemically. The complex binds strongly to graphene and forms monolayers with a molecular footprint of 2.3 nm(2) and a ΔG(ads) = -38.8 ± 0.2 kJ mol(-1). Its monolayers are stable in fresh electrolyte for more than 12 h and desorb from graphene 1000 times more slowly than model compounds bearing a single aromatic binding group. Differences in the heterogeneous rate constants of electron transfer between the two compounds suggest that the tripod projects its redox couple away from the graphene surface.     

Sulfonamide carbazole receptors for anion recognition

Carbazole-based receptors functionalized with two sulfonamide groups have been synthesized and their properties as anion receptors have been evaluated. The receptor with bis(trifluoromethyl)aniline groups has shown a very high affinity for halide ions, especially remarkable as only two hydrogen bonds are formed in the complexes. (1)H NMR and fluorescence titrations have been carried out and binding constants up to 7.9 × 10(6) M(-1) have been reached. X-ray structures have been obtained and a modelling study has shown the possible reasons for the large affinity of these compounds for halide anions.     

New Approach for the Construction of the Coumarin Frame and Application in the Total Synthesis of Natural Products

A new synthetic approach is described for building the coumarin scaffold through the Lewis acid‐promoted cyclization of novel aryl 3‐(dimethylamino)prop‐2‐enoates 2a – 2f . The latter precursors were prepared via aminomethylenation of the corresponding aryl acetates 4a – 4f with the Bredereck reagent. This approach was used for the synthesis of biologically active natural compounds 1a – 1f , through a three‐step procedure starting from the corresponding phenols.     

Lanthanide(III)/pyrimidine-4,6-dicarboxylate/oxalate extended frameworks: a detailed study based on the lanthanide contraction and temperature effects

Detailed structural, magnetic, and luminescence studies of six different crystalline phases obtained in the lanthanide/pyrimidine-4,6-dicarboxylate/oxalate system have been afforded: {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·3H(2)O}(n) (1-Ln), {[Ln(μ-pmdc)(μ-ox)(0.5)(H(2)O)(3)]·2H(2)O}(n) (2-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·~2.33H(2)O}(n) (3-Ln), {[Ln(2)(μ(3)-pmdc)(μ(4)-pmdc)(μ-ox)(H(2)O)(3)]·5H(2)O}(n) (4-Ln), {[Ln(μ(3)-pmdc)(μ-ox)(0.5)(H(2)O)(2)]·H(2)O}(n) (5-Ln), and [Ln(pmdc)(1.5)(H(2)O)(2.5)] (6-Ln). The slow generation of the oxalate (ox) anion, obtained from the in situ partial hydrothermal decomposition of the pyrimidine-4,6-dicarboxylate (pmdc) ligand, allows us to obtain good shaped single crystals, while direct addition of potassium oxalate provides the same compounds but as polycrystalline samples. The crystal structures of all compounds are based on the double chelation established by the pmdc and ox ligands to provide distorted 2D honeycomb layers that, in some cases, are fused together, leading to 3D systems, by replacing some of the coordinated water molecules that complete the coordination sphere of the lanthanide by uncoordinated carboxylate oxygen atoms of the pmdc. The presence of channels occupied by crystallization water molecules is also a common feature with the exception of compounds 5-Ln. It is worth noting that compounds 3-Ln present a commensurate crystal structure related to the partial occupancy of the crystallization water molecules placed within the channels. Topological analyses have been carried out, showing a previously nonregistered topology for compounds 4-Ln, named as jcr1. The crystal structures are strongly dependent on the lanthanide ion size and the temperature employed during the hydrothermal synthesis. The lanthanide contraction favors crystal structures involving sterically less hindranced coordination environments for the final members of the lanthanide series. Additionally, reinforcement of the entropic effects at high temperatures directs the crystallization process toward less hydrated crystal structures. The magnetic data of these compounds indicate that the exchange coupling between the lanthanide atoms is almost negligible, so the magnetic behavior is dominated by the spin-orbit coupling and the ligand field perturbation. The luminescence properties that exhibit the compounds containing Nd(III), Eu(III), and Tb(III) have been also characterized.     

Thermal behavior of blends based on a thermoplastic-modified epoxy resin with a crosslinking density variation

The thermal behavior of blends based on a polystyrene (PS) and several epoxy-amine systems where amino groups were provided by a monoamine (MA) and a diamine (DA) mixed in different proportions was investigated. This way, the crosslinking density of epoxy-amine polymer was controlled and continuously changed from a linear polymer (epoxy-MA) to a highly crosslinked polymer (epoxy-DA). The effect of the MA–DA proportion and PS modifier on the thermal stability, glass transition, and polymerization reaction was studied by differential scanning calorimetry and thermogravimetric analysis. The MA–DA ratio and modifier proportion did not affect the reaction heat but affected the reactivity. The thermal stability and glass transition temperature increased by increasing the DA proportion in the blend as a result of the higher degree of crosslinking. A study of miscibility of blends based on glass transitions was performed. The thermoplastic-modified materials generally showed two glass transitions with values close to the those of the pure materials, indicating that the mixtures were separated into phases.     

Liquid-crystalline hybrid materials based on [60]fullerene and bent-core structures

What a core-ker! By the appropriate combination of promesogenic bent-core structures and the C(60) unit, lamellar polar liquid-crystal phases were induced. The supramolecular organization of the functional fullerene-based assemblies, the temperature range of the soft phase, the stabilization of the mesophase-like order at room temperature, and the molecular switching under an electric field can be tuned, depending on the molecular structure.     

Combination of MOFs and zeolites for mixed-matrix membranes

Mixed-matrix membranes (MMMs) were prepared by combinations of two different kinds of porous fillers [metal-organic frameworks (MOFs) HKUST-1 and ZIF-8, and zeolite silicalite-1] and polysulfone. In the search for filler synergy, the MMMs were applied to the separation of CO(2)/N(2), CO(2)/CH(4), O(2)/N(2), and H(2)/CH(4) mixtures and we found important selectivity improvements with the HKUST-1-silicalite-1 system (CO(2)/CH(4) and CO(2)/N(2) separation factors of 22.4 and 38.0 with CO(2) permeabilities of 8.9 and 8.4 Barrer, respectively).