Low-temperature electrothermal vaporization of thenoyltrifluoroacetone complex of Sc(III) and Y(III) for sample introduction in an inductively coupled plasma atomic emission spectrometry,and their determination in biological samples

A new method for inductively coupled plasma atomic emission spectrometry (ICP-AES) determination of trace Sc and Y, based on gaseous compound introduction into the plasma as their thenoyltrifluoroacetone (TTA) complexes by electrothermal vaporization was developed. Using the reagent TTA as chemical modifier can not only enhance the analytical signals, but also reduce the vaporization temperature. At a temperature of 1,000 °C the trace Sc and Y can be vaporized completely into ICP. The factors affecting the formation of the chelate and its vaporization behavior, such as drying time, vaporization temperature/time, reaction medium and the amount of TTA, were investigated in detail. Under the optimized conditions (drying temperature/time 100 °C/10 s, vaporization temperature/time 1,000 °C/4 s), the limits of detection for Sc and Y were 19 pg and 34 pg (3), respectively, and the relative standard deviations for Sc and Y were 4.2% (c _Sc=0.2 g mL^–1; n=7) and 2.6% (c _Y=0.5 g mL^–1; n=7). The linear ranges of the calibration graphs cover three orders of magnitude. The method was applied to the analysis of the biological reference materials (GBW 07602, bush branches and leaves; GBW 07604, poplar leaves), and the results obtained were in good agreement with the certified values.     

Microcalorimetry as a possible tool for phenanthrene toxicity evaluation to eukaryotic cells

Microcalorimetry and measurement of culture turbidity using a Bioscreen C Analyzer System were applied to study the toxic effect of phenanthrene on Cunninghamella elegans IM 1785/21Gp spore germination. The results of C. elegans spore incubation in Bioscreen C microbiology reader showed the inhibition of spore germination by 70% (with 25 mg l⁻¹ of phenanthrene) and total inhibition of the fungus growth with a higher content of the xenobiotic (50-100 mg l⁻¹). The microcalorimetric technique showed to be useful for the estimation of metabolic activity of C. elegans spores in growth medium up to xenobiotic concentrations of 90 mg l⁻¹. These data corresponded with the microscopic observations. The obtained results showed that the microcalorimetry method could be a valuable supplement in the study on the mechanism of PAHs detoxification by fungi.     

R12 hydrate formation kinetics based on laser light scattering technique

Gas hydrates are non-stoichiometric crystalline compounds of water with gas at a certain temperature and pressure. Compared to the thermodynamics of hydrate formation, our knowledge on the kinetics aspect is rather immature. It is well known that the kinetics of hydrate formation/dissociation plays an important role in many industrial cases, such as the exploitation of methane hydrate underground, the storage and transportation of natural gas in solid hydrate state, the inhibition of hydrate i…     

Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

Role of the tautomerism of 2-azaadenine and 2-azahypoxanthine in substrate recognition by xanthine oxidase

The tautomerism of 2-azaadenine and 2-hypoxanthine has been examined in the gas phase and in aqueous solution. The tautomerism in the gas phase has been studied by means of semiempirical and ab initio quantum-mechanical computations, as well as density-functional calculations. The influence of the aqueous solvent on the relative stability between tautomers has been estimated from self-consistent reaction field calculations performed with different high-level continuum models. The results provide a detailed picture of the tautomeric preference for these purine bases. The importance of tautomerism in the substrate recognition by xanthine oxidase is discussed. Finally, the rate of oxidation of 2-azaadenine and 2- hypoxanthine by xanthine oxidase is discussed in terms of the recognition model at the enzyme active site.     

Highly accurate gas chromatographic analysis of reference gases for use in vehicle emission measurements

 A highly accurate gas chromatographic analytical method has been developed for the determination of the composition of gas mixtures. It was tested using a reference gas as an example consisting of 3.5% of CO, 14% of CO₂, 0.2% of propane and residual N₂ intended for the use in vehicle emission measurements. The method is based on comparison measurements with samples of a calibration gas, whose composition is iteratively adapted to that of the sample investigated using a gravimetric gas mixing method. For the gas chromatographic measurement, a molecular sieve column and a polymer column are used in parallel and in isothermal operation. All gas components can be determined by a single gas chromatographic measurement, and the relative uncertainty of measurement achievable is ?0.4%. Received: 6 March 1996/Revised: 30 May 1996/Accepted: 6 June 1996     

Effects of nonionic sugar surfactants on the phase transition of DPPC membranes

The influence of newly synthesized N-alkanoyl-N-methyllactitolamines (decanoyl [C₁₀MELA], lauoroyl [C₁₂MELA] and miristoyl [C₁₄MELA]) on the thermotropic phase transition of phosphatidylcholine bilayer was compared with common sugar-based surfactants N-dodecyl-β-d-glucopyranoside [C12G1] and decanoyl-N-methyl glucamide [MEGA-10]. The results indicate that C_nMELA are very active at the membrane surface and disturb the phospholipid bilayer structure less than commercially used MEGA-10 and C12G1.     

Isobaric vapor–liquid equilibria for the quaternary reactive system: Ethanol + water + ethyl lactate + lactic acid at 101.33 kPa

Isobaric vapor–liquid equilibrium (VLE) data of the reactive quaternary system ethanol (1) + water (2) + ethyl lactate (3) + lactic acid (4) have been determined experimentally. Additionally, the reaction equilibrium constant was calculated for each VLE experimental data. The experimental VLE data were correlated using the UNIQUAC equation to describe the chemical and phase equilibria simultaneously. For some of the non-reactive binary systems, UNIQUAC binary interaction parameters were obtained from the literature. The rest of the binary UNIQUAC parameters were obtained by correlating the experimental quaternary VLE data obtained in this work. A maximum pressure azeotrope at high water concentration for the binary reactive system ethyl lactate + water has been calculated.     

Flow injection analysis: Rayleigh light scattering technique for total protein determination

A novel flow injection analysis (FIA) method with Rayleigh light scattering (RLS) detection was developed for the determination of total protein concentrations. This method is based on the weak intensity of RLS of bromothymol blue (BB) (3',3"-dibromothymolsulfonephthalein) which can be enhanced by the addition of protein in weakly acidic solution. A common spectrofluorimeter was used as a detector. It was proved that the application of this method to quantify the total proteins in real samples by using bovine serum albumin was possible. The RLS signal was detected at lambda(ex)= lambda(em)=572 nm. The linear range was 7.0-70.0 microg mL(-1), the detection limit was 3.75 microg mL(-1), the reproducibility was 5.5% (n=7), and the sample throughput was 26 h(-1).