Thermal Analysis of Hexachloroplumbate and Chlorides Containing Complex Divalent Lead 2,2'-bipyridine Cations

Lead(II) 2,2'-bipyridine hexachloroplumba tetetrahydrate was synthesized and investigated by DTA, TG and DTG. IR spectroscopy and other methods enabled the identification of some of the decomposition products. Comparative studies on the corresponding chlorides: [Pb(bipy)]Cl₂ and [Pb(bipy)₃]Cl₂, which can be considered as precursors of the hexachloroplumbate, were also undertaken. X-ray measurements enabled the tentative determination of the crystal structure of [Pb(bipy)]Cl₂. Hexachloroplumbate decomposes with the liberation of chlorine, water and organic ligands, and the process is accompanied by the simultaneous transition of Pb(IV)→Pb(II). Chlorides release only ligands upon heating. Residues comprised always PbCl₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

New insights into the reaction of zinc alkyls with dioxygen

Studies on the reaction of zinc alkyls with O2 are reported which demonstrate that the selective oxygenation of organozinc compound is viable. The reaction of [EtZn(azol)]n (azol = deprotonated 1-aziridineethanol) with an excess of dry O2 in toluene affords the zinc ethylperoxide [EtOOZn(azol)]2[EtZn(azol)]2, while the analogous reaction between Me2Zn and O2 results in the isolation of the Me6Zn7(OMe)8 cluster in high yield.     

Determination of sulphur by electrolytic hydrogenation

Certain sulphur compounds such as thiosulphuric acid, polythionic acids, thiocyanic acid, thioureas, thioamides and 2-mercapto-acids are readily electrolytically hydrogenated in 1N sulphuric acid to form hydrogen sulphide which is absorbed in potassium hydroxide solution and titrated with o-hydroxymercuribenzoic acid in the presence of dithizone as indicator. The electrolytic cell consists of a lead anode in 5N sulphuric acid, a porous ceramic tube as diaphragm, and a cathode made of soft iron. The first-order rate-constants of hydrogenation and the results of determination of sulphur in some sulphur compounds are presented. The limit of determination is 0.1 ppm.     

Accurate and efficient method for predicting thermochemistry of polycyclic aromatic hydrocarbons - bond-centered group additivity

A self-consistent estimation method for the thermochemical properties of polycyclic aromatic hydrocarbons (PAH) is presented. This method is based on enthalpies of formation (DeltaHf(degrees), entropies (S(degrees)298, and heat capacities (C(degrees)p obtained from B3LYP/6-31G(d) calculations of the total energies and frequencies for 139 PAHs, including C(60) and C(70) fullerenes. The enthalpies of formation were calculated using an optimized set of homodesmic reactions given the available experimental DeltaHf(degrees) of PAHs. The theoretical entropies were compared with the existing experimental entropies, and some inconsistencies in the experimental data were identified. The estimation method presented here is a systematic extension of the widely employed atom-centered group additivity method originally proposed by Benson. This new method is based on bond-centered groups that define bonds linking two atom-centered groups and specify the size of the rings to which they belong. In addition, a term to describe the resonance energy is included. The thermochemical properties of PAHs up to C(70) fullerene are estimated with a mean average deviation of 2.8 kcal mol(-1) in DeltaHf(degrees), 0.7 cal K(-1) mol(-1) in S(degrees)298, and about 0.5 cal K(-1) mol(-1) in the C(degrees)p. This bond-centered group additivity method for the thermochemical properties of PAHs significantly expands both the range of systems that can be estimated and the accuracy of the estimations. The results of this work also allow us to assess the quality of available experimental data. For example, there are strong indications that the literature DeltaHf(degrees)of benzo[k]fluoranthene is about 10 kcal mol(-1) too low.     

SrInGe and EuInGe: new Zintl phases with an unusual anionic network derived from the ThSi(2) structure

Two new isostructural Zintl phases, EuInGe and SrInGe, are obtained from high-temperature reactions of the pure elements in welded Ta tubes. Both ternary phases crystallize in a new structure type in space group Pnma (No. 62), with a = 4.921(1) A, b = 3.9865(9) A, and c = 16.004(3) A for EuInGe; and a = 5.021(1) A, b = 4.0455(9) A, and c = 16.188(4) A for SrInGe. The crystal structures established by single-crystal X-ray diffraction feature zigzag chains of 3-bonded Ge atoms and puckered layers of 4-bonded In atoms. The two structural units are linked into an anionic network with channels composed of 5-membered and 7-membered rings. The channels are filled by the respective divalent cations. The chemical bonding of the anionic [InGe](2)(-) network, derived from a one-electron oxidative distortion of the alpha-ThSi(2) structure, is explained using extended-Hückel band structure calculations. Magnetic measurements indicate that EuInGe exhibits Curie-Weiss paramagnetic behavior above 35 K and antiferromagnetic behavior below 35 K. The calculated effective moment, mu(eff) = 8.11 mu(B), of EuInGe and the diamagnetic behavior of SrInGe are consistent with the oxidation states of Eu(II) and Sr(II), respectively.     

Primary and secondary relaxations in bis-5-hydroxypentylphthalate revisited

The molecular structure of bis-5-hydroxypentylphthalate (BHPP) is like dihexyl phthalate but having appended to it two hydroxyl end groups, which contribute additional dipole moments and capacity for hydrogen-bond formation. In a previously published dielectric study of the primary and secondary relaxations of BHPP, it was found that all the dynamic properties are normal except for the anomalously large width of the primary relaxation loss peak. There are two secondary relaxations, the relaxation time of the slower one increases with increasing pressure, whereas that of the faster one is practically insensitive to pressure. Hence, the slower secondary relaxation is the "universal" Johari-Goldstein (JG) [J. Chem. Phys. 53, 2372 (1970); 55, 4245 (1971)] relaxation in BHPP. All is well except if the observed large width of the primary relaxation were an indication of a corresponding large coupling parameter n=0.45 in the coupling model. Then the predicted relations between the primary relaxation time tau(alpha) and the JG relaxation time tau(JG) found previously to hold in many glass formers would be violated. It was recognized that this singular behavior of BHPP is likely due to broadening of the primary loss peak by the overlapping contributions of two independent dipole moments present in BHPP, and the actual coupling parameter is smaller. However, at the time of publication of the previous work there were not enough data to support this explanation. By making broadband dielectric measurements of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) that have chemical structures closely related to BHPP but with only one dipole moment, we show that all their dynamic properties are almost the same as BHPP but the widths of their primary relaxation loss peaks are significantly narrower corresponding to a smaller coupling parameter n=0.34. The new data presented here indicate that the coupling parameter of BHPP is about the same as DBP and DOP, and the predicted relations between tau(alpha) and tau(JG) of BHPP are brought back in agreement with the experimental data.     

Apparent molar volumes,heat capacities,and molecular excluded volumes of methylated,hydroxy and methoxy derivatives of 1-methylcytosine in aqueous solutions at 25°C

Densities and specific heat capacities of aqueous solutions: 1-methylcytosine; 1-methyl-N⁴-hydroxycytosine; 1,5-dimethylcytosine; I,N⁴-dimethylcytosine; 1,5-dimethyl-N⁴-hydroxycytosine; 1-methyl-N⁴-methoxycytosine; 1,N⁴,N⁴-trimethylcytosine, 1,5-dimethyl-N⁴-methoxycytosine were determined using flow calorimetry and flow densimetry at 25°C. Apparent molar volumes and heat capacities were then determined. Molecular excluded volumes were evaluated. A relationship was found between the values of the increments in partial molar values and the kind of groups substituted. Four types of contributions were distinguished: substitution of hydrogen on C, N, and O (in OH group on N4) atoms by CH₃ group and replacement of hydrogen on N4 atom by OH group. The correlation between the experimental partial molar volumes and calculated molecular excluded volumes was also elaborated.     

Determination of the total nitrogen content of hard, semihard, and processed cheese by the Kjeldahl method: collaborative study

The objective of this collaborative study was to determine interlaboratory performance statistics for a modified and optimized version of AOAC Method 920.123 for the determination of the total nitrogen content of hard, semihard, and processed cheese by Kjeldahl analysis. Details included addressing the issues of material homogeneity, test portion size (1 g), quantitative transfer (weighing on to filter paper), ensuring system suitability (nitrogen recoveries), and using AOAC Method 991.20 as the basis for nitrogen analysis. Fifteen laboratories tested 18 pairs of blind duplicate cheese materials with a crude protein content between 18 and 36%. Materials represented hard, semihard, and processed commercial cheeses with a wide range of composition. Statistical performance parameters expressed as crude protein (nitrogen x 6.38), g/100 g, with invalid and outlier data removed were mean = 26.461, repeatability standard deviation (Sr) 0.111, reproducibility standard deviation (S(R)) = 0.153, repeatability relative standard deviation (RSDr) = 0.42%, reproducibility relative standard deviation (RSDR) = 0.58%, repeatability (r) = 0.312, and reproducibility (R) = 0.428. The interlaboratory study results were acceptable and comparable to those for the milk Kjeldahl nitrogen method on a relative nitrogen basis. The Study Directors recommend that this modified method for the determination of total nitrogen in hard, semihard, and processed cheese by Kjeldahl analysis be adopted First Action as an improved method to replace Method 920.123.     

Optimized conditions for hydrocarbon group type analysis of base oils by thin-layer chromatography-flame ionisation detection

The results of research on the optimization of the thin-layer chromatography-flame ionisation detection for the determination of group composition of natural base oils, including separation of the aromatics into subgroups, are presented. Neutral base oils obtained in several steps of refining from vacuum distillation petroleum fractions are the most difficult to analyze by hydrocarbon group type analysis (HGTA) because of the high content of aliphatic fragments in their molecules. Factors affecting the accuracy and precision of the results were identified. The paper presents the analytical procedure, including two different calibration methods, as well as the results of studies on the reproducibility of HGTA of typical base oils of different viscosity classes under the optimized conditions. The same conditions were found suitable for HGTA of other high-boiling petroleum fractions by TLC with flame ionisation detection. The paper also introduces a new procedure for reproducible determination of polar fractions in base oils utilizing solid-phase extraction columns, and presents a corrected procedure for the determination of saturated compounds and aromatics (mono-, bi- and polycyclic) in base oils by column liquid chromatography.     

Facts and artifacts about aromatic stability estimation

The stability of a set of 105 five-membered π-electron systems (involving aromatic, non-aromatic and anti-aromatic species) was evaluated using six isodesmic reactions of which two belong to the subclass of homodesmotic reactions, which are based on cyclic and acyclic reference systems. We demonstrate that the ‘Resonance Energies’ derived from isodesmotic schemes have obvious flaws and do not correct or cancel other contributions to the energy, such as the changes of hybridization, homoconjugation of heterosubstituted cyclopentadienes, conjugative interactions of CC or CX (X=N or P) with a π or pseudo π orbital at Y (Y=O, S, NH, PH), strain, etc. as effectively as possible. Likewise, ‘aromatic stabilization energies (ASE)’ derived from homodesmotic schemes based on the acyclic reference compounds do not give satisfactory results. We strongly recommend that only cyclic reference compounds should be used for ASE and other aromaticity evaluations. The analysis is based on ab initio optimized geometries at B3LYP/6-311+G^∗∗.