Preparation,characterization and a kinetic study oftrans-[Ru(NH3)4L(H2O)](PF6)2 [L=PPh3, AsPh3, or SbPh3]

Summary The complexestrans-[Ru(NH₃)₄(H₂O)PPh₃](PF₆)₂ and [Ru(NH₃)₅L](PF₆)₂, (L=AsPh₃ or SbPh₃) have been isolated and characterized by microanalysis, cyclic voltammetry and ultraviolet-visible spectroscopy. The specific rate constants for the aquation of [Ru(NH₃)₅L]²⁺ totrans-[Ru(NH₃)₄L(H₂O)]²⁺ are (2.5±0.1)×10^–5s^–1 and (1.8±0.1)×10^–5s^–1 for L=AsPh₃ and SbPh₃, respectively, at 25.0±0.1°C; =0.10 mol dm^–3, NaO₂CCF₃. Under the same conditions, the second-order rate constants for the substitution of water intrans-[Ru(NH₃)₄(H₂O)L]²⁺ by isonicotinamide (isn) are 1.2±0.1, (6.3±0.3)×10^–2 and (3.8±0.2)×10^–2 m ^–1s^–1 for L=PPh₃, AsPh₃, and SbPh₃, respectively, suggesting that the order of decreasingtrans-effect is: PPh₃AsPh₃>SbPh₃. The formation constants for thetrans-[Ru(NH₃)₄L(isn)]²⁺ complexes are 75±3, (1.40±0.01)×10³ and (1.80±0.02)×10³M^–1 for L=PPh₃, AsPh₃, and SbPh₃, respectively, suggesting that the order of increasingtrans-influence is: SbPh₃3PPh₃.     

2-Phosphinophenolate complexes: formation and crystal structure of a novel trinuclear mu-O nickel(II)-tris(P(intersection)O-chelate)

A novel linear trinuclear mu-O-bridging 2-phosphinophenolate nickel(II) complex with fac-tris(P(intersection)O- chelates) in the terminal positions and the three oxygen atoms each facing the central nickel(II) cation was synthesized and structurally characterized by X-ray crystallography. To the best of our knowledge, this is the first example of an octahedral Ni(II) tris(P(intersection)O- chelate).     

BIOLOGICAL ACTIVITIES OF PHTHALOCYANINES-X. SYNTHESES AND ANALYSES OF SULFONATED PHTHALOCYANINES

Abstract— Synthetic methods to obtain selectively sulfonated metallo phthalocyanines are compared. Both condensation and direct sulfonation procedures lead to mixtures of mono- to tetrasulfonated products which are resolved by reverse phase liquid chromatography in buffered aqueous-methanol. The proportion of sulfonated derivatives is examined as a function of the starting reagents in the case of the condensation method, and as a function of the temperature and reaction time in the case of the direct sulfonation procedure. The number of sulfonate groups per phthalocyanine molecule is determined by oxidative degradation of the phthalocyanine ring followed by quantitative chromatographic analysis of the sulfophthalamide and phthalamide fragments.     

Direct optical emission spectroscopy of liquid analytes using an electrolyte as a cathode discharge source (ELCAD) integrated on a micro-fluidic chip

Atomic emission detection of metallic species in aqueous solutions has been performed using a miniaturised plasma created within a planar, glass micro-fluidic chip. Detection was achieved using an Electrolyte as a Cathode Discharge source (ELCAD) in which the sample solution itself is used as the cathode for the discharge. To realise the ELCAD technique within a micro-fluidic device, a parallel liquid-gas flow was set up in a micro-channel and a glow discharge ignited between the flowing liquid sample surface and a metal wire anode. The detection of copper and sodium was achieved, using atmospheric pressure air as a carrier gas, by observation of atomic emission lines of copper at 324 nm, 327 nm, 511 nm, 515 nm and 522 nm and an atomic emission line of sodium at 589 nm using a commercially available miniaturised spectrometer. A total electrical power of less than 70 mW was required to sustain the discharge. A semi-quantitative, absolute detection limit of 17 nmol s(-1) was obtained for sodium with a sample flow rate of 100 microL min(-1) and an integration time of 100 ms in air at atmospheric pressure. The volume required for such detection is approximately 170 nL. Further analysis was performed with an Echelle spectrometer using both argon and air as a carrier gas. The geometry and flow rates used demonstrate the feasibility of integrating such micro-plasmas into other micro-fluidic devices, such as miniaturised CE devices, as a method of detection. The potential for using such micro-plasmas within highly portable miniaturised systems and mu-TAS devices is presented and discussed.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

A straightforward preparation of amino–polystyrene resin from Merrifield resin

Azidomethyl–polystyrene, obtained by nucleophilic substitution of chloromethyl–polystyrene, undergoes a Schmidt rearrangement when treated with trifluoromethanesulfonic acid, affording amino–polystyrene. To assess its loading and reactivity the resin is used as a support for the preparation of triazene-linked amine.