Prepared Low Stress Cubic Boron Nitride Film by Physical Vapor Deposition

We present low stress cubic boron nitride (cBN) films with a transition layer deposited on the metal alloy substrates by tuned substrate radio-frequency magnetron sputtering. The films were characterized by Fourier transform infrared spectroscopy and transmission electron microscopy (TEM). The IR peak position of cubic boron nitride at 1006.3 cm⁻¹, which is close to the stressless state, indicates that the film has very low internal stress. The TEM image shows that pure CBN phase exists on the surface of the film. Several phases of boron nitride were found at the medium implantation dose. It is believed that the transition from the low ordered phases to cBN phase occurred during implantation.     

Spectrophotometric determination of equilibrium constants of two mutual competitive reactions by the method of isosbestic points

We have developed a method that makes use of dual isosbestic points in a dual ligand, single metal system that allows the determination of the equilibrium constants of complexes in which two ligands compete for the same metal ion, and one complex is colourless. The competition of methyl thymol blue and citrate was used to test the model.     

Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

Dynamic light-scattering analysis of the electrostatic interaction of hexahistidine-tagged cytochrome P450 enzyme with semiconductor quantum dots.

Currently, there is great interest in the development of methods suitable for determining the stoichiometry of biomolecules attached to nanoparticles. We describe the use of the dynamic light-scattering technique (DLS) to determine the stoichiometry of the protein cytochrome P450(BSbeta) attached to CdS and CdSe quantum dots (QDs). The enzyme-conjugated QDs have different diffusion characteristics compared to the QD and enzyme precursors, expressed in their size, scattering intensity as well as zeta-potential values. The significant enhancement of the scattering intensity of QDs observed upon conjugation with the P450(BSbeta) due to the refractive-index increment and the systematic variation in zeta potential resulting from charge neutralization of the anionic QDs by the cationic histidine-tagged P450(BSbeta) have been used for stoichiometry determination.     

结合三维静电势参数研究二取代苯的定量结构－疏水性关系

对含有常见取代基的92个二取代苯化合物进行了结构优化和静电势及其导出参数的计算,运用多元线性回归方法对化合物的疏水常数与分子的结构参数进行了关联.结果表明,分子表面负静电势的加和ΣV－S、分子空间内最负的静电势Vmin、表面最大静电势Vs,max以及分子体积V、极性表面积APS和分子的偶极密度μ/V这六个参数,可以很好地用于表达这些化合物疏水性与分子结构间的定量关系,而不用具体考虑分子中极性基团间的相互作用.用建立起来的QSPR(quantitative structure-property relationship)关系式对111个类似化合物的疏水性进行了预测,获得了满意的结果.     

Yb3+在不同基质中基态分裂能的计算分析

利用晶体场理论,推导出Yb3+离子基态(2F7/2)与Nd3+离子基态(4I9/2)最大分裂能之间的关系式为△E(2F7/2)=1.4667△E(4I9/2),从实验数据拟合得到的关系式为△E(2F7/2)=1.0987△E(4I9/2).理论计算与实验拟合存在差异,分析了出现差异的原因,认为差异主要是由相同晶体场对于不同掺杂离子的影响即晶体场参数Nv值不完全相同而引起的.     

固相热分解反应最可几机制的判断

固相热分解反应最可几机制的判断高永煜，邹文樵，冯仰婕（华东理工大学化学系上海２００２３７）关键词热分解，动力学方程，反应机制固相热分解反应机制的判断，是热分析动力学中令人感兴趣的领域。常用的方法是从含机制函数的非等温积分动力学方程出发，分别用Ｓｅｓｔ...     

Voltammetric determination of 5-hydroxydole-3-acetic acid in human gastric juice

A method for the determination of the major serotonin metabolite — 5-hydroxyindole-3-acetic acid (5-HIAA) in human gastric juice by cyclic voltammetry was described. The measurement conditions were investigated. The potential window was chosen from +0.1 to +0.9 V, the supporting electrolyte was 0.025 M PBS solution (pH 2.0). The method allowed determination in the concentration range from 2.0 ×10⁻⁷ to 2.0 ×10 ⁻⁵ M and a detection limit of 80 nM. When samples of gastric juice were analyzed with the method, we obtained the mean content of 5-HIAA in the gastric juice. Meanwhile, interference from other ions and substances were examined. The experimental results indicate that the method for the determination of gastric juice samples is successful.     

Effects of the preparation methods on the properties of Ni-La2O3-SiO2 catalysts for m -dinitrobenzene hydrogenation

Ni-La₂O₃-SiO₂ catalysts were prepared by wetness impregnation and sol-gel method followed by conventional drying and supercritical drying, respectively. Their physico-chemical properties and activity for the hydrogenation of m-dinitrobenzene to m-phenylenediamine were investigated by BET, XRD, TPR, H₂-TPD and activity tests. The results showed that the structural and catalytic properties of the Ni-La₂O₃-SiO₂ catalysts obviously depended on the preparation method and the drying mode. The catalyst prepared by the sol-gel method in combination with conventional drying exhibited the highest catalytic activity among the catalysts tested, attributable to its well-dispersed nickel particles and larger active nickel surface area.     

Novel eclipsed 2D cadmium(II) coordination polymers with open-channel structure constructed from terephthalate and 3-(2-pyridyl)pyrazole: crystal structures, emission properties, and inclusion of guest molecules

Five new eclipsed two-dimensional (2D) coordination polymers, [[Cd(2)(TPT)(2)L(2)](GM(1))(3/2)(H(2)O)](infinity) (1) (TPT = terephthalate, L = 3-(2-pyridyl)pyrazole, GM(1) = terephthalic acid), [[Cd(TPT)L](GM(2))(H(2)O)(2)]( infinity) (2) (GM(2) = L = 3-(2-pyridyl)pyrazole), [[Cd(TPT)L](GM(3))(1/2)(H(2)O)](infinity) (3) (GM(3) = mesitylene), [[Cd(4)(TPT)(4)L(4)](GM(4))(7/2)](infinity) (4) (GM(4) = tetramethylbenzene), and [[Cd(TPT)L](GM(5))(1/2)](infinity) (5) (GM(5) = naphthalene), have been synthesized and characterized by X-ray diffraction. All the five complexes take the similar eclipsed 2D open-channel framework with different guest molecules included in the cavities of their channels. TGA analysis indicates that the eclipsed open-channel frameworks are thermally stable up to 300 degrees C. The porous property of the 2D framework of 5 was also investigated by the XRPD technique, which indicated that the guest molecules included in the open-channel frameworks are removable and the framework is maintained after the removal of the guest molecules. Moreover, complexes 1-5 also display strong blue emission in the solid state.