Hydroindene-derived chiral synthons from carotol and their cytotoxicity

Ten enantiomerically pure hydroindene-derived compounds obtained by the transformation of (+)-carotol, the main constituent of carrot seed essential oil, were examined for their ability to inhibit the growth of myeloid leukaemia (HL-60) cancer cell lines. All compounds showed significant activity, which was comparable to the most active volatile organic compounds, such as trans–trans-farnesol, citral and nerolidol. Based on the bioactivity and molecular modelling, a 3D QSAR pharmacophore model was generated.     

Structure and crystallization of sub-elementary fibrils of bacterial cellulose isolated by using a fluorescent brightening agent

The structure and crystallization of carefully isolated sub-elementary fibrils (SEFs) of bacterial cellulose have been investigated using TEM, WAXD, and high-resolution solid-state ¹³C NMR. The addition of a suitable amount of fluorescent brightener (FB) to the incubation medium of Acetobacter xylinum effectively suppressed the aggregation of the SEFs into the microfibrils, as previously reported. However, this study confirmed for the first time that serious structural change in the SEFs occurs during the removal of excess FB by washing with buffer solutions having pH values higher than 6 or with the alkaline aqueous solution that was frequently used in previous studies. In contrast, the isolation of unmodified SEFs was successfully performed by utilizing a washing protocol employing pH 7 citrate–phosphate buffer solution containing 1% sodium dodecyl sulfate. High-resolution solid-state ¹³C NMR and WAXD measurements revealed that the SEFs thus isolated are in the noncrystalline state in which the pyranose rings of the almost parallel cellulose chains appear to be stacked on each other. The respective CH₂OH groups of the SEFs adopt the gt conformation instead of the tg conformation found in cellulose I _α and I _β crystals, and undergo significantly enhanced molecular motion in the absence of intermolecular hydrogen bonding associated with these groups. The main chains are also subject to rapid motional fluctuations while maintaining the parallel orientation of the respective chains, indicating that the SEFs have a liquid crystal-like structure with high molecular mobility. Moreover, the SEFs crystallize into cellulose I _β when the FB molecules that may adhere to the surface of the SEFs are removed by extraction with boiling 70 v/v% ethanol and 0.1N NaOH aqueous solution. On the basis of these results, the crystallization of the SEFs into the I _α and I _β forms is discussed, including the possible formation of the crystalline-noncrystalline periodic structure in native cellulose.     

Critical re-investigation of the alditol acetate method for analysis of substituent distribution in methyl cellulose

The alditol acetate method is a common procedure for sugar analysis, also applied to determine the substituent distribution in monomer units of polysaccharide ethers like methyl cellulose by gas liquid chromatography. Consisting of several preparation and work-up steps this procedure is both time consuming and prone to side reactions that promote discrimination of single constituents, especially when no peralkylation step is performed prior to hydrolysis. As a consequence results scatter in dependence on individual treatment and conditions. In the context of this work these critical points were overcome by strict but simplified work-up procedures and using acid instead of alkaline catalyzed acetylation. Under the acidic conditions the tedious removal of borate is no longer necessary and a reduced time requirement was achieved as well as good reproducibility. Comparison with independent reference methods excluded a systematic error of the method and confirmed the results obtained. Without peralkylation, i.e. in the presence of free hydroxyl groups, another fast modification of the method using DMSO as solvent, no removal of borate, and 1-methylimidazole as catalyst for acetylation was found to produce a systematic error.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

Cellulosic nanoparticles from alfa fibers (<Emphasis Type="Italic">Stipa tenacissima)</Emphasis>: extraction procedures and reinforcement potential in polymer nanocomposites

The microstructure and chemical composition of alfa (Stipa tenacissima) were investigated. The polysaccharide and lignin contents were around 70 and 20 wt%, respectively. From the bleached and delignified fibers, two types of nanosized cellulosic particles were extracted, namely cellulose nanocrystals and microfibrillated cellulose (MFC). The former correspond typically to the elementary crystallite units of the cellulose fibers, with a rod-like morphology and an aspect ratio of about 20. The latter, mechanically disintegrated from oxidized bleached fibres, presents an entangled fibrillar structure with widths in the range 5-20 nm. The reinforcing potential of the ensuing nanoparticles was investigated by casting a mixture of acrylic latex and aqueous dispersion of cellulose nanoparticles. Thermo-mechanical analysis revealed a huge enhancement of the stiffness above the glass transition of the matrix. Significant differences in the mechanical reinforcing capability of the nanoparticles were reported.     

Evaluation of the Fate of Aldicarb and Its Metabolites in Oranges

Abstract

The accumulation, persistence and fate of systemic pesticide aldicarb was melencholy evaluated in orange crops. The concentration of this pesticide and its two toxic metabolites, aldicarb sulfoxide and aldicarb sulfone was determined in leaves, rind and pulp of three orange varieties (Satsuma, Navelina and Clemetina de Nules) and in the top soil of the orange groves. The groves were located in two different places in the Valencia Community (Spain). The analysis showed that the aldicarb concentration was lower than those of aldicarb sulfoxide and aldicarb sulfone. In all cases, the residues persisted at least 160 days in vegetable samples and between 157 and 227 days in soil samples. Residue concentrations measured in the soil samples were highly variable but a relation with the organic matter content can be observed. The residue levels found in vegetal products were higher in leaves than in rind, and in rind than in pulp. The maximum residue values were obtained between 47 and 70 days after the application. One hundred days after treatment (Security period) the residue levels of total fruit were lower than the maximum residue level of 0.2 mg/kg established by law.     

Theoretical investigation of effects of local cooling of a nozzle divergent section for controlling condensation shock in a supersonic two-phase flow of steam

In supersonic adiabatic two-phase flows of steam, under the influence of supersonic acceleration, the fluid loses its equilibrium conditions and becomes supersaturated. Following this condition and to restore the fluid to equilibrium, micro droplets of water form in the absence of any surface or foreign particles. This phenomenon is called homogeneous nucleation and the formed minute small droplets grow along the fluid flow path. The formation of these droplets and their growth causes the release of the latent heat of evaporation to the gas phase particularly in the nucleation region, and results in an increase in the flow pressure which is called the condensation shock. In this paper, and in continuation of the series of papers by the authors, in addition to analytically solving the adiabatic gas-liquid supersonic flow of steam in a convergent-divergent channel, a novel solution to controlling the undesired effects of this pressure rise (condensation shock) is presented. In the proposed method, with the help of cooling the divergent section of the nozzle, the analytical model for the 1D non-adiabatic two-phase steam flows is further developed which shows considerable decrease in the intensity of the formed condensation shock. Also the growth rate of the formed droplets due to the cooling of the steam flow has higher importance than the nucleation itself.     

Synthesis of novel copolymer：Poly(p-dioxanone-co-L-phenylalanine)

In order to expand the application of poly(p-dioxanone) or PPDO in biomedical area,a series of novel copolymers were synthesized successfully by one-step,melted copolymerization of p-dioxanone(PDO) and L-phenylalanine N-carboxyanhydride(L-Phe-NCA) monomers.With the in-feed molar ratio of L-PheNCA /PDO equal to 1/20,the conversions of the two kinds of monomers were calculated from ~1H NMR. The average molecular weight and polydispersity of the copolymer increase with the increasing reaction time and catalyst concentration.However,the conversions of the two kinds of monomers did not change with the reaction conditions.A three-step mechanism is presented and proved by high resolution ~1H NMR and IR spectrums.     

Trends of Atmospheric CCl 3 F,CCl 2 F 2 and CCl 2 FCClF 2 in Shanghai (China)

Atmospheric concentrations of CCl 3 F (CFC-11), CCl 2 F 2 (CFC-12), and CCl 2 FCClF 2 (CFC-113) in troposphere in Shanghai, China (31°1N) have been routinely monitored by using gas chromatography with electron capture detector from November 1997 to December 2000. The observation shows that there is a slowly declining trend of the three compounds. On the other hand, a comparison has been drawn between the concentrations observed and the ones calculated by 2-box model on the basis of the global statistical data of CFCs production and emission. Our observation agrees with the calculations. It shows that production and emission of chlorofluorocarbons (CFCs) in China are still at a low level and gradually decreasing.