2-氨基-4-氟吡啶合成工艺研究

2-氨基-4-氟吡啶是制备酪氨酸激酶抑制剂、PI3K抑制剂和醛固酮合酶抑制剂等酶抑制剂的重要中间体.已报道的制备方法均存在一些缺陷,难以满足工业化生产.本文以4-氯吡啶-2-甲酰胺为原料,经酰胺脱水、卤素交换、氰基水解、霍夫曼降解等反应得到目标化合物.产物结构经1 H NMR和GC-MS确证.本文采用的合成方法简单、反...     

Single molecule spectroscopy studies of diffusion in mesoporous silica thin films

Single molecule spectroscopy is applied in studies of diffusion and surface adsorption in sol-gel-derived mesoporous silica thin films. Mesoporous films are obtained by spin casting surfactant-templated sols onto glass substrates. Small-angle X-ray diffraction results are consistent with hexagonally ordered mesophases in as-synthesized (i.e., surfactant-containing) films. Upon calcination, a 30% contraction and disordering of these structures occurs. Nile Red is used as a fluorescent probe of both the as-synthesized and calcined films. It is loaded into the samples at subnanomolar levels either prior to spin casting or after calcination. Fluorescence imaging and single-point fluorescence time transients show the dye molecules to be relatively mobile in the as-synthesized samples. In contrast, the molecules appear entrapped at fixed locations in dry calcined films. In calcined films rehydrated under high humidity conditions, the Nile Red molecules again become mobile. Time transients obtained from the as-synthesized and rehydrated samples provide clear evidence for frequent reversible adsorption of the dye to the silica surfaces. Autocorrelations of the time transients provide quantitative data on the mean diffusion coefficients (D = 2.4 x 10(-10) and 2.6 x 10(-10) cm2/s) and mean desorption times (1/k = 25 and 40 s) for the as-synthesized and rehydrated films, respectively. The results prove both water and surfactant play important roles in governing matrix interactions and mass transport.     

Effects of 3,4-dihydrophenyl groups in water-soluble phospholipid polymer on stable surface modification of titanium alloy

The surface of a titanium (Ti) alloy substrate was modified by a simple and quick process using a water-soluble polymer, and the effects of 3,4-dihydroxyphenyl (DHP) groups in the polymer side chain on the modification process were examined. The polymers (PMDP) composed of both 2-methacryloyloxyethyl phosphorylcholine (MPC) unit and 3,4-dihydroxyphenyl methacrylate unit were synthesized for surface anchoring. The Ti alloy substrate was coated with PMDP using an aqueous solution of the polymer. A PMDP layer with a thickness of 20 nm was formed on the Ti alloy substrate simply by dip coating for 10 s without drying. Even when the Ti alloy substrate with PMDP coating was immersed in the aqueous medium for 1 week, no change in the thickness was observed, i.e., the PMDP layer was bound to the surface very stably. Oxidation of the DHP groups reduced the stability of the polymer layer significantly. Thus, the DHP groups play a significant role in achieving stable binding. Protein was adsorbed on the Ti alloy substrate; however, this was not observed for the PMDP-coated Ti alloy substrate. In conclusion, we confirmed the effects of DHP groups in PMDP on the stability of the coating on the Ti alloy substrate. Moreover, we found that surface treatment using PMDP was simple, quick, and reliable, and thus, it has great potential for improving biofouling of Ti alloy substrates used in medical devices.     

A One‐Step Route to CO2‐Based Block Copolymers by Simultaneous ROCOP of CO2/Epoxides and RAFT Polymerization of Vinyl Monomers

The one‐step synthesis of well‐defined CO₂‐based diblock copolymers was achieved by simultaneous ring‐opening copolymerization (ROCOP) of CO₂/epoxides and RAFT polymerization of vinyl monomers using a trithiocarbonate compound bearing a carboxylic group (TTC‐COOH) as the bifunctional chain transfer agent (CTA). The double chain‐transfer effect allows for independent and precise control over the molecular weight of the two blocks and ensures narrow polydispersities of the resultant block copolymers (1.09–1.14). Notably, an unusual axial group exchange reaction between the aluminum porphyrin catalyst and TTC‐COOH impedes the formation of homopolycarbonates. By taking advantage of the RAFT technique, it is able to meet the stringent demand for functionality control to well expand the application scopes of CO₂‐based polycarbonates.     

离子色谱法测定有机溶剂中痕量阴离子

采用阴离子交换分离,化学抑制模式,对甲醇、乙腈、异丙醇等有机溶剂中的阴离子进行测定。将有 机溶剂稀释一倍直接进样可以测定Cl-、NO-3、SO2-4,在一定的色谱条件下,3种阴离子都具有很好的线性和 较低的检出限。甲醇中Cl-、NO-3、SO2-43种离子的检出限分别是1.1、3.2和4.9μg/L,乙腈中分别是1.4、 7.1和16.5μg/L,异丙醇中分别是1.2、8.1和25.6μg/L。采用化学抑制模式的离子色谱法是一种检测有机 物中阴离子的高效、准确的方法。     

Determination of Enantiomeric Purity of GSK962040 Based on Liquid Chromatography Using Chiral Stationary Phase Combined with a Pre-column Derivatization Procedure

A sensitive and accurate LC method was developed and further validated for the determination of enantiomeric purity of GSK962040. Before separation, a pre-column derivatization procedure was performed. Baseline separation with a resolution higher than 1.9 was accomplished within 15 min using a Chiralpak AD-H (250 × 4.6 mm; particle size 5 μm) column, with n-hexane: 2-propanol (85:15 v/v) as mobile phase at a flow rate of 1 mL min^?1. The eluted analytes were subsequently detected with a UV detector at 260 nm. The effects of mobile phase components and temperature on enantiomeric selectivity as well as resolution of enantiomers were thoroughly investigated. The calibration curves were plotted within the concentration range between 4 and 200 μg mL^?1 (n = 8), and recoveries between 98.15 and 101.48% were obtained, with relative standard deviation (RSD) lower than 1.42%. The LOD and LOQ for the Boc-GSK962040 were 1.23 and 4.15 μg mL^?1 and for its enantiomer were 1.38 and 4.76 μg mL^?1, respectively. The developed method was also evaluated and validated by analyzing bulk samples with different enantiomeric ratios of GSK962040. It was demonstrated that the method was accurate, robust and sensitive, and also had practical utilities for real analysis.     

Potentiometric determination of iron using a fluoride ion-selective electrode-the application of the Apple II-ISE intelligent ion analyzer

A new method for determining iron is based on both nonlinear regression calibration plots and parabolic interpolation using a fluoride ion-selective electrode (ISE) and the Apple II-ISE intelligent ion Analyzer developed by ourselves. The experimental conditions for determining iron are discussed. The appropriate acidity of the experimental solution is pH 3, controlled by total ionic strength adjustment buffer (TISAB) that is composed of glycine (aminoacetic acid), nitric acid and sodium nitrate. The suitable total concentration of fluoride is equal to the highest concentration of iron in the standard series. Because the mathematical model of the method coincides with the experimental data the Apple II-ISE intelligent ion Analyzer can perform data acquisition and data processing, and the performance of fluoride electrode is excellent, the new method for determination of iron is fast and accurate. This method has been used successfully in the determination of iron in mineral samples.     

Statistical inference for panel data semiparametric partially linear regression models with heteroscedastic errors

We consider a panel data semiparametric partially linear regression model with an unknown parameter vector for the linear parametric component, an unknown nonparametric function for the nonlinear component, and a one-way error component structure which allows unequal error variances (referred to as heteroscedasticity). We develop procedures to detect heteroscedasticity and one-way error component structure, and propose a weighted semiparametric least squares estimator (WSLSE) of the parametric component in the presence of heteroscedasticity and/or one-way error component structure. This WSLSE is asymptotically more efficient than the usual semiparametric least squares estimator considered in the literature. The asymptotic properties of the WSLSE are derived. The nonparametric component of the model is estimated by the local polynomial method. Some simulations are conducted to demonstrate the finite sample performances of the proposed testing and estimation procedures. An example of application on a set of panel data of medical expenditures in Australia is also illustrated.     

Energy Spectrum and Its Pressure-Induced Shift and g Factor of ZnS:Mn2+

By using strong-field scheme, the complete d⁵ energy matrix with D_2d symmetry has been constructed. Then, by diagonalization of this matrix at normal and various pressures,the whole energy spectrum [including the ground-state zero-field-splitting (GSZFS)], its PS and the g factor of the ground state for zns:Mn²⁺ have uniformly been calculated. According to the eigenfunctions and PS, the new assignments of five absorption bands have been given.The variation of tetragonal field with pressure makes a main contribution to the pressureinduced shift (PS) of GSZFS of zns:Mn²⁺, which supports the existence of tetragonal Jahn-Teller distortion in zns:Mn²⁺. It is found that when P≥62 kbar, t₂⁴(³T₁)e⁴T₁ merges with t₂e^{4 2}T₂, which has to be taken into account in the calculation of PS of the fifth band in the range of 1 bar ~ 95 kbar. It is demonstrated that the Mn²⁺ ions in ZnS:Mn²⁺ have tetrahedral coordination, and the difference between ζ and ζ' caused by the covalency effect is very important for GSZFS. The physical essentials of typical levels, GSZFS and their PS have been revealed. By taking into account the influence of covalency on t₂³(⁴A₂)e²(³A₂)⁴A₁ and t₂³(²E)e²(³A₂)⁴E, the positon of the third absorption band at normal pressure has been estimated.