Hydrothermal synthesis and characterization of (enH2)3.5[As8V14O42(PO4)]·2H2O

The compound (enH₂)_3.5[As₈V₁₄O₄₂(PO₄)]·2H₂O 1 (en=ethylenediamine) has been synthesized and characterized by means of elemental analysis, IR spectrum, ESR spectrum, XPS spectrum, TG analysis and single crystal X-ray diffraction analysis. The compound 1 crystallizes in monoclinic system, space group C2/c, β=105.59(3), Z=8 and R₁(wR₂)=0.0398(0.0885). The compound 1 is constructed from [As₈V₁₄O₄₂(PO₄)]⁷⁻ anions and H₂en cations linked through hydrogen bonds into a network. The [As₈V₁₄O₄₂(PO₄)]⁷⁻ cluster consists of 14 VO₅ square pyramids linked by 4 As₂O₅ handle-like units, and includes at its center an ordered PO₄³⁻ anion.     

钨砷杂多阴离子[KAs4W40O140(M·H2O)2]n-中配位水的取代反应

本文报道了[KAs_4W_(40)O_(140)(M·H_2O_2]~(n-)杂多阴离子中配位水的取代反应.在水溶液中,许多配体,如[Fe(CN)_6]~(4-)、[Fe(CN)_6]~(3-),SO_3~(2-)等都能取代配位水形成具有特征颜色的配离子.在水溶液中不能发生的配体取代配位水的反应,在非极性有机溶剂中却容易发生,这与配位水分子在非极性有机溶剂中易脱去形成配位不饱和态有关.     

Theoretical studies on the mechanism of acid-promoted hydrolysis of N-formylaziridine in comparison with formamide

[reaction: see text] We present an ab initio study of the acid-promoted hydrolysis reaction mechanism of N-formylaziridine in comparison with formamide. Since the rate of amide hydrolysis reactions depends on the formation of the tetrahedral intermediate, we focused our attention mainly on the reactant complex, the tetrahedral intermediate, and the transition state connecting these two stationary points. Geometries were optimized using the density functional theory, and the energetics were refined using ab initio theory including electron correlation. Solvent effects were investigated by using polarizable continuum method calculations. The proton-transfer reaction between the O-protonated and N-protonated amides was investigated. In acidic media, despite that the N-protonated species is more stable than the O-protonated one, it is predicted that both N-protonated and O-protonated pathways compete in the hydrolysis reaction of N-formylaziridine.     

Binding sites of nitrogenase: kinetic and theoretical studies of cyanide binding to extracted FeMo-cofactor derivatives

The first kinetic study of a substrate (CN(-)) binding to the isolated active site (extracted FeMo-cofactor) of nitrogenase is described. The kinetics of the reactions between CN(-) and various derivatives of extracted FeMo-cofactor [FeMoco-L; where L is bound to Mo, and is NMF, Bu(t)NC, or imidazole (ImH)] have been followed using a stopped-flow, sequential-mix method in which the course of the reaction is followed indirectly, by monitoring the change in the rate of the reaction of the cofactor with PhS(-). The kinetic results, together with DFT calculations, indicate that the initial site of CN(-) binding to FeMoco-L is controlled by a combination of the electron-richness of the cluster core and lability of the Mo-L bond. Ultimately, the reactions between FeMoco-L and CN(-) involve displacement of L and binding of CN(-) to Mo. These reactions occur with a variety of rates and rate laws dependent on the nature of L. For FeMoco-NMF, the reaction with CN(-) is complete within the dead-time of the apparatus (ca. 4 ms), while with FeMoco-CNBu(t) the reaction is much slower and exhibits first order dependences on the concentrations of both FeMoco-CNBu(t) and CN(-) (k = 2.5 +/- 0.5 x 10(4) dm(3) mol(-1) s(-1)). The reaction of FeMoco-ImH with CN(-) occurs at a rate which exhibits a first order dependence on FeMoco-ImH but is independent of the concentration of CN(-) (k = 50 +/- 10 s(-1)). The results are interpreted in terms of CN(-) binding directly to the Mo site for FeMoco-NMF and FeMoco-ImH, but with FeMoco-CNBu(t) initial binding at an Fe site is followed by movement of CN(-) to Mo. Complementary DFT calculations are consistent with this interpretation, indicating that, in FeMoco-L, the Mo-L bond is stronger for L = ImH than for L = CNBu(t) and the binding of CN(-) to Mo is stronger than to any Fe atom in the cofactor.     

An indium(III)–water chain based on an unusual acyclic water pentamer

An in situ reaction under hydro­thermal conditions leads to the formation of the title compound, diaqua­(pyridine‐2‐carboxyl­ato)­(pyridine‐2,6‐dicarboxyl­ato)indium(II) trihydrate, [In(C₆H₄NO₂)(C₇H₃NO₄)(H₂O)₂]·3H₂O, in which the central In^III atom is seven‐coordinated by one pyridine‐2,6‐di­carboxyl­ate ligand, one pyridine‐2‐carboxyl­ate ligand and two water mol­ecules in a penta­gonal–bipyramidal coordination environment. An indium(III)–water chain based on an unusual water pentamer is observed.     

Assembly of azido- or cyano-bridged binuclear complexes containing the bulky [Mn(phen)2]2+ building block: syntheses, crystal structures, and magnetic properties

Two new cyano-bridged heterobinuclear complexes, [Mn(II)(phen)2Cl][Fe(III)(bpb)(CN)2] x 0.5CH3CH2OH x 1.5H2O (1) and [Mn(II)(phen)2Cl][Cr(III)(bpb)(CN)2] x 2H2O (2) [phen = 1,10-phenanthroline; bpb(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate], and four novel azido-bridged Mn(II) dimeric complexes, [Mn2(phen)4(mu(1,1)-N3)2][M(III)(bpb)(CN)2]2 x H2O [M = Fe (3), Cr (4), Co (5)] and [Mn2(phen)4(mu(1,3)-N3)(N3)2]BPh4 x 0.5H2O (6), have been synthesized and characterized by single-crystal X-ray diffraction analysis and magnetic studies. Complexes 1 and 2 comprise [Mn(phen)2Cl]+ and [M(bpb)(CN)2]- units connected by one cyano ligand of [M(bpb)(CN)2]-. Complexes 3-5 are doubly end-on (EO) azido-bridged Mn(II) binuclear complexes with two [M(bpb)(CN)2]- molecules acting as charge-compensating anions. However, the Mn(II) ions in complex 6 are linked by a single end-to-end (EE) azido bridging ligand with one large free BPh4(-) group as the charge-balancing anion. The magnetic coupling between Mn(II) and Fe(III) or Cr(III) in complexes 1 and 2 was found to be antiferromagnetic with J(MnFe) = -2.68(3) cm(-1) and J(MnCr) = -4.55(1) cm(-1) on the basis of the Hamiltonian H = -JS(Mn)S(M) (M = Fe or Cr). The magnetic interactions between two Mn(II) ions in 3-5 are ferromagnetic in nature with the magnetic coupling constants of 1.15(3), 1.05(2), and 1.27(2) cm(-1) (H = -JS(Mn1)S(Mn2)), respectively. The single EE azido-bridged dimeric complex 6 manifests antiferromagnetic interaction with J = -2.29(4) cm(-1) (H = -JS(Mn1)S(Mn2)). Magneto-structural correlationship on the EO azido-bridged Mn(II) dimers has been investigated.     

LC-ESI-MS Determination of Bilobalide and Ginkgolides in Canine Plasma

A sensitive and selective method using liquid chromatography with electrospray ionization mass spectrometric detection was developed for the quantification of bilobalide and ginkgolides in canine plasma. The analytes were extracted with diethyl ether-dichloromethane-isopropanol (6:3:1, v/v) after spiking the samples with daidzein (internal standard). The lower limit of quantification (LLOQ) of the method was 2.5 μg L⁻¹ for ginkgolide B and 10.0 μg L⁻¹ for bilabolide, ginkgolide A and ginkgolide C. The accuracy of the method was within 15% of the actual values over a wide range of plasma concentrations. The intra-day and inter-day precision was better than 15% (R.S.D.). Finally, the LC-ESI-MS method was successfully applied to study the pharmacokinetics of ginkgolides and bilabolide after administration of Ginkgo biloba extracts to dogs.     

Reactivity of Ar'GeGeAr' (Ar' = C6H3-2,6-Dipp2, Dipp = C6H3-2,6-iPr2) toward alkynes: isolation of a stable digermacyclobutadiene

The first reactions of the "digermyne" Ar'GeGeAr' (1, Ar' = C6H3-2,6-Dipp2, Dipp = C6H3-2,6-iPr2) with alkynes are reported. 1 reacts with 1 equiv of H5C6CCC6H5 to afford the 1,2-digermacyclobutadiene 2 in high yield, while it reacts with 2 equiv of the less hindered alkyne Me3SiCCH to yield an unexpected bicyclic compound 3. Molecular structures of 2 and 3 were determined by X-ray crystallography. A possible mechanism for the formation of 3 is discussed. The high reactivity of 1, even at room temperature, emphasizes the fundamental differences between the GeGe and CC multiple bonds.     

催化动力学光度法测定痕量锰（Ⅱ）

研究了在Ｎａ２ＨＰＯ４－ＮａＯＨ介质中，Ｍｎ（Ⅱ）催化高碘酸钾氧化镁试剂１［４－（对硝基苯偶氮）间苯二酚］的反应及其动力学条件，建立了一种高灵敏、高选择性测定痕量Ｍｎ（Ⅱ）的新方法。可测０．０１－２．５μｇ／２５ｍＬ范围的锰（Ⅱ），方法的检测限为６．４３×１０＾－１１ｇｍ／ｍＬ。     

便携式温度计校验仪的研制

介绍便携式温度计校验仪的工作原理及研制过程。对该仪器的恒温槽体机械结构、制冷器和散热器的设计、恒温槽体温度测量及控制等进行了详细叙述。该仪器提供的温度场稳定、均匀，在-20～100℃范围内可任意设定温度。解决了温度计现场快速校准的问题。