Molecular and nanoscale materials and devices in electronics

Over the past several years, there have been many significant advances toward the realization of electronic computers integrated on the molecular scale and a much greater understanding of the types of materials that will be useful in molecular devices and their properties. It was demonstrated that individual molecules could serve as incomprehensibly tiny switch and wire one million times smaller than those on conventional silicon microchip. This has resulted very recently in the assembly and demonstration of tiny computer logic circuits built from such molecular scale devices. The purpose of this review is to provide a general introduction to molecular and nanoscale materials and devices in electronics.     

Theoretical study on intermolecular interactions in BrF/HnX adducts

Equilibrium geometries, interaction energies, and charge transfer for the intermolecular interactions between BrF and H_nX (HF, H₂O, and NH₃) were studied at the MP2/6-311++G(3d,3p) level. The halogen-bonded geometry and hydrogen-bonded geometry are observed in these interactions. The calculated interaction energies show that the halogen-bonded structures are more stable than the corresponding hydrogen-bonded structures. To study the nature of the intermolecular interactions, symmetry-adapted perturbation theory (SAPT) calculations were carried out and the results indicate that the halogen bonding interactions are dominantly inductive energy in nature, while electrostatic energy governs the hydrogen bonding interactions.     

固相热分解反应最可几机制的判断

固相热分解反应最可几机制的判断高永煜，邹文樵，冯仰婕（华东理工大学化学系上海２００２３７）关键词热分解，动力学方程，反应机制固相热分解反应机制的判断，是热分析动力学中令人感兴趣的领域。常用的方法是从含机制函数的非等温积分动力学方程出发，分别用Ｓｅｓｔ...     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

铝原子簇上化学吸附的尺度效应及其理论模型

对铝原子簇Al_n(n=1～10,12,13)已报导过的理论预测几何构型进行合理选择, 用量子化学CNDO/2法研究了单分子一氧化碳在这些簇上取不同吸附位形时的吸附作用。结果表明吸附强度随簇尺度的变化呈“幻数”特性: Al_2、Al_6、Al_(12)簇具有特别高的吸附能, 与实验观测结果相符。采用作者建议的推广电子壳模型可合理解释这一尺度效应。对Al_(12)和Al_(13)簇电子结构的分析进一步支持了壳模型的观点。随着簇的增大, 尺度效应逐步减弱并趋向于体相铝的性质。     

铝酸钠溶液的紫外吸收峰

分别用量子化学MNDO和DV-X_α方法计算了二聚铝酸离子[Al_2O(OH)_6]~(2-)和Al(OH)_4~-。结果表明前者旋转势垒很低, 只有10.08 kJ·mol~(-1), 最稳定平衡构型为C_s。用X_α过渡态理论计算获得这两个离子紫外吸收峰的理论值分别为266.6 nm和234.4 nm, 与实验值270.0 nm和230.0 nm相当接近。因此可以认为, 紫外吸收峰270.0 nm和230.0 nm分别为[Al_2O(OH)_6]~(2-)和Al(OH)_4~-离子的最高占有轨道电子向最低空轨道跃迁时产生的吸收峰。计算结果支持铝酸钠溶液中存在二聚铝酸离子的观点。     

Thermodynamics and kinetics of the hydride-transfer cycles for 1-aryl-1,4-dihydronicotinamide and its 1,2-dihydroisomer

Five 1-(p-substituted phenyl)-1,4-dihydronicotinamides (GPNAH-1,4-H(2)) and five 1-(p-substituted phenyl)-1,2-dihydronicotinamides (GPNAH-1,2-H(2)) were synthesized, which were used to mimic NAD(P)H coenzyme and its 1,2-dihydroisomer reductions, respectively. When the 1,4-dihydropyridine (GPNAH-1,4-H(2)) and the 1,2-dihydroisomer (GPNAH-1,2-H(2)) were treated with p-trifluoromethylbenzylidenemalononitrile (S) as a hydride acceptor, both reactions gave the same products: pyridinium derivative (GPNA(+)) and carbanion SH(-) by a hydride one-step transfer. Thermodynamic analysis on the two reactions shows that the hydride transfer from the 1,2-dihydropyridine is much more favorable than the hydride transfer from the corresponding 1,4-dihydroisomer, but the kinetic examination displays that the former reaction is remarkably slower than the latter reaction, which is mainly due to much more negative activation entropy for the former reaction. When the formed pyridinium derivative (GPNA(+)) was treated with SH(-), the major reduced product was the corresponding 1,4-dihydropyridine along with a trace of the 1,2-dihydroisomer. Thermodynamic and kinetic analyses on the hydride transfer from SH(-) to GPNA(+) all suggest that the 4-position on the pyridinium ring in GPNA(+) is much easier to accept the hydride than the 2-position, which indicates that when the 1,4-dihydropyridine is used the hydride donor to react with S, the formed pyridinium derivative GPNA(+) may return to the 1,4-dihydropyridine by a hydride transfer cycle; but when the 1,2-dihydropyridine is used as the hydride donor, the formed pyridinium derivative can not return to the 1,2-dihydropyridine by the hydride reverse transfer from SH(-) to GPNA(+). These results clearly show that the hydride-transfer cycle is favorable for the 1,4-dihydronicotinamides, but unfavorable for the corresponding 1,2-dihydroisomers.     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.     

Self-complementary

Three [3]catenanes with cavities large enough to accommodate aromatic guests have been designed and synthesized (yields = 5-20 %) by means of kinetically controlled self-assembly processes. The X-ray structural analysis of one of three [3]catenanes confirmed the presence of a rectangular cavity (dimensions = 7 x 11 A) lined by pi-electron-rich recognition sites and hydrogen-bond acceptor groups. In spite of their apparently ideal recognition features, none of these [3]catenanes bind guests incorporating a pi-electron-deficient bipyridinium unit. However, the template-directed syntheses of the [3]catenanes also produce, in yields of 2-23%, [2]catenanes incorporating a 1,5-dioxynaphtho[38]crown-10 interlocked with a bipyridinium-based tetracationic cyclophane. The X-ray structural analyses of two of these [2]catenanes revealed that a combination of [pi...pi] and [C-H...pi] interactions is responsible for the formation of supramolecular homodimers in the solid state. 1H NMR spectroscopic investigations of the four [2]catenanes demonstrated that supramolecular homodimers are also formed (Ka= 17-31M(-1), T= 185 K) in (CD3)2CO solutions. Dynamic 1H NMR spectroscopy revealed that the 1,5-dioxynaphtho[38]crown-10 and tetracationic cyclophane components in the four [2]catenanes and in the three [3]catenanes circumrotate (deltaGc(not equal to) = 9-14 kcal mol(-1)) through each other's cavity in (CD3)2CO. Similarly, the 1,5-dioxynaphthalene and the bipyridinium ring systems rotate (deltaGc(not equal to) =10-14 kcal mol(-1)) about their [O...O] and [N...N] axes, respectively, in solution.     

Design and fabrication of 2 kHz nematic liquid crystal variable retarder with reflection mode

ABSTRACT

This study proposes a simple method of designing a high-speed liquid crystal variable retarder (LCVR) with reflection mode. First, a series of simple formulas is provided for analysing the effects of tilt incidence and birefringence of the liquid crystal on the phase retardation and response time of the LCVR. Then, a reflective LCVR is fabricated to validate the theoretical analysis. Measured results show that the response speed can reach 2.7 kHz with a phase retardation of 1 λ. Furthermore, the theoretical curve is close to the measured curve while the incident angle is less than 10°. However, the theoretical and measured values show a considerable difference under a large incident angle. This problem is discussed, and a modified method is given. This work is helpful for the design and fabrication of high-speed LCVR.