超声雾化法制取金属粉末方法研究

本文介绍了利用超声振动能量制取超细金属粉末的超声雾化方法，提出了超声制粉雾化室，等离子枪，阴极、阳极喷咀及换能器振动系统的最佳尺寸和工作参数，给出了实验结果及制得的粉末显微结构照片．实验结果表明，用本文所述方法制得的金属粉末组成为：－80目粉占84呢，－120目粉占63．7啪，而用PREP方法制得的粉末分别占19．5％和11．7％，由此看来，用本方法制取超细金属粉，在粒度组成方面优于PREP方法．文中还对粉末冷却速度做了估算，得到了粉末平均冷却速度大于1×10_5k/5     

ComBn(m+n≤6)团簇的结构，电子特性和磁性研究

基于密度泛函理论和卡里普索结构预测方法,系统研究了ComBn(m+n≤6)团簇的结构,电子特性和磁性。首先,通过卡里普索结构预测方法获得了体系的基态和亚稳态结构。基于基态结构,利用HOMO-LUMO能隙,垂直电离势,垂直电子亲和势和化学硬度分析了掺杂体系的稳定性。最后,研究了基态结构对应的自然布局分布,自然电子组态等电子特性和磁性。     

基于多域特征提取和深度学习的声源被动测距*

由于实际海洋环境中存在大量的非高斯噪声,一些基于高斯假设的传统去噪方法在实际海洋环境中性能下降甚至失效。针对非高斯噪声,如α稳定分布噪声、非平稳行船噪声下的脉冲信号的去噪与重构,该文提出一种基于深度学习的方法。去噪模型首先通过学习带噪信号短时傅里叶变换谱与残差谱之间的映射关系以去除环境噪声,之后对去噪信号的时频谱进行逆变换重构脉冲信号。仿真实验结果表明,深度学习模型在非高斯噪声环境下脉冲信号的去噪与重构任务中有着良好的表现,在实测样本上也表现出良好的泛化性,体现了一定的工程应用价值。     

Consistent Initialization for Nonlinear Index-2 Differential–Algebraic Equation: Large Sparse Systems in MATLAB

An important component of any initial-value solver for higher-index differential–algebraic equations consists in the computation of consistent initial values. In a recent paper [5], an algorithm is proposed which is applicable to a very general class of index-2 systems. Unfortunately, the computational expense is rather high. We present a modification of this approach, which gives rise to a MATLAB implementation capable of handling systems of moderate dimension (several thousands of unknowns). The algorithm is illustrated by examples.     

双折射光纤中克尔效应及光纤－光学逻辑门

本文详细地研究了单模双折射光纤中的克尔效应．讨论了其应用于光纤－光学逻辑门的优点,给出了有关的理论分析和计算结果以实验装置,确定了强度型逻辑门的“１／０”状态,测出了输出光脉冲宽度．理论分析和实验结果符合良好．     

液体扩散时的折射率分布和扩散系数的测定

本实验提供一种测量透明度或半透明度液体的折射率和扩散系数的方法。此方法可用于食品工业、日用化学工业、石油工业及制药工业部门。     

Navier-Stokes方程带Backtracking技巧的两重网格算法

1 引 言考虑二维不可压 Navier-Stokes方程:     

Preparation and characterization of a poled nanocrystal and polymer composite PbTiO3/PEKc film for electro-optic applications

Composite thin films of PbTiO₃ nanocrystals and high-transparency PEKc polymer for applications in electro-optical devices were prepared using the spin coating technique. The size of the PbTiO₃ nanocrystals was estimated to be 30–40 nm using a transmission electron microscope. The transmission technique, a simple method for measuring the electro-optic coefficients of poled composite polymer films was developed. The electro-optic coefficient γ₃₃ of poled PbTiO₃/PEKc composite polymer films was measured to be 18.34 pm  V^-1 at 633 nm under room temperature. The index at 633 nm and the dielectric constant at 100 kHz under room temperature were determined to be 1.65248 and 7.32, respectively. The figure of merit F₂=n⁷γ²/ε was estimated to be 1546, showing very good electro-optical properties. Received: 5 February 2002 / Accepted: 12 March 2002 / Published online: 19 July 2002 RID="*" ID="*"Corresponding author. Fax: +852/2788-7791, E-mail: eeytc@cityu.edu.hk