CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

Syntheses and structures of magnesium pyridine thiolates--model compounds for magnesium binding in photosystem I

Novel magnesium pyridine-2-thiolates were prepared by using alkane elimination chemistry. The resulting complexes display a metal coordination environment composed of sulfur/nitrogen bonding from the intramolecularly stabilized mercaptopyridine ligand, in addition to coordination by the oxygen centers from two THF donors. The compounds are well-suited model compounds for the magnesium centers in Photosystem I, in which magnesium, situated in the central chlorophyll ligand, is bound to sulfur from a nearby methionine residue. All compounds were characterized by (1)H, (13)C NMR, and IR spectroscopy, in addition to Xray crystallography.     

O（^3P）原子与丙醛和正丁醛化学反应动力学研究

我们已对O(~3p)原子和酮类分子化学反应速率常数进行了系列测定,分析讨论了羰基对O(~3p)抽提氢原子反应速率的影响,关于O(~3p)与醛类分子反应速率的测定也有报道。本文用流动微波放电-化学发光光子计数方法测定O(~3p)原子与丙醛和正丁醛化学反应速率常数及其与温度的关系,并由动力学数据对醛基中C—H键的离解能进行了讨论。     

葡萄糖氧化酶电极的制备

葡萄糖氧化酶电极的制备于秀娟，周定，郭京华（哈尔滨工业大学应用化学系哈尔滨１５０００６）关键词葡萄糖氢化酶，酶电极，制备酶与电极的连接即酶膜的形成是制备酶电极的关键步骤之一，有许多种方式［１～９］．葡萄糖氧化酶（ＧＯＤ）电极是研究较早和报道较多的一类...     

流动注射-结晶紫-磷钼杂多酸离子缔合体系光度法测定水中痕量正磷酸盐

在一定的酸度条件下,结晶紫与磷钼杂多酸离子缔合物的流动注射分光光度法可直接测定痕量磷.灵敏度高,重现性和选择性好.水中常见离子不干扰痕量磷的测定,工作曲线的线性范围为0～500μg·L~(-1)的磷,检出下限达1.0μg·L~(-1),以120h~(-1)采样频率,对各种天然水样进行测定,回收率为92.5%～105.0%,相对标准偏差为0.1%～6.7%.     

聚（β－羟基丁酸酯）／聚双酚A羟基醚共混体系相容性及结构的研究

ＤＳＣ和ＦＴＩＲ测试表明，结晶／非晶共混体系聚（β－羟基丁酸酯）（ＰＨＢ）／聚双酚Ａ羟基醚（ＰＢＨＥ）是部分相容的．熔融结晶退火可以大大提高共混物的结晶度，增加其相容性，７５／２５组分ＰＨＢ相结晶度最大，５０／５０组分（０２０）、（１３０）晶面微晶尺寸最大．ＳＡＸＳ研究表明，纯ＰＨＢ的中间层约为１．５ｎｍ，片层厚约４．０ｎｍ；共混物的中间层在２．０ｎｍ左右，片层厚在５．０—７．２ｎｍ之间，５０／５０组分片层最厚．７５／２５组分晶相和非晶相的密度差最大．     

242-260nm波长区CS2分子的多光子解离电离

在242－260nm波氏范围通过CS2分子的共振增强多光子电离（REMPI）获得了母体离子CS和碎片离子的分质量激发谱．在λ＜246.4nm区间，CS激发谱上呈现出来源于CS2双光子电离的弥散谱带,碎片离子激发谱的归属强烈提示多光子过程中有中性基电子态的CS和S（经由CS2的光解离）产生：（1）CS 的谱带主要来源于中性CS碎片经由单光子跃迁产生的（1＋1）共振增强电离，（2）除了部分S 的谱峰来自CS 的光解外，多数S 的锐谱峰来自中性S原子经由3p3（2D0）4p，3p3（4S0）np（n＝6，7，8）←3p43pJ（J＝2，1,0）双光子跃迁产生的（2＋1）共振增强电离．     

氢在钯单晶表面的解离与在体相的扩散

氢分子在金属表面的解离吸附与氢原子在金属体相的扩散是个典型的表面过程.前者在甲烷化及合成氨等基础化工反应中起着关键作用;后者常常导致金属材料的脆化与断裂,但过渡金属及其合金是安全和优良的储氢材料.因此,研究氢分子在金属表面的解离吸附与氢原子在金属体相的扩散,是多相催化与金属物理广泛感兴趣的课题,具有重要的理论和应用价值.本文采用分子动力学方法初步探讨了二者之间的关联.分子催化动力学为从微观层次上研究上述课题提供了一种理论方法.本文采用经过我们改进的半经验LEPS方法,计算了氢分子在Pd(100)和(110)晶面的解离和氢原子在钯表面与体相扩散的相互作用位能面,并根据计算结果探讨了其微观机理.     

Comparison between the pervaporation and vapor permeation performances of polycarbonate membranes

The pervaporation and vapor permeation performance of symmetrical and asymmetrical polycarbonate membranes, prepared via a dry-phase inversion and wet-phase inversion methods, respectively, were studied by measuring the permeation rate and separation factor. It was found that the polymer concentration effect on the pervaporation performance for the symmetrical polycarbonate membrane was lower than that for the asymmetrical polycarbonate membrane. Compared with pervaporation, vapor permeation has a significantly increased separation factor with a decreased permeation rate for the symmetrical polycarbonate membrane. Water molecules preferentially dissolve into the symmetrical polycarbonate membrane and diffuse easily through the membrane.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.