Interfacial and electrical properties of HfAlO/GaSb metal-oxide-semiconductor capacitors with sulfur passivation

Interfacial and electrical properties of HfAlO/GaSb metal-oxide-semiconductor capacitors(MOSCAPs) with sulfur passivation were investigated and the chemical mechanisms of the sulfur passivation process were carefully studied. It was shown that the sulfur passivation treatment could reduce the interface trap density Ditof the HfAlO/GaSb interface by 35% and reduce the equivalent oxide thickness(EOT) from 8 nm to 4 nm. The improved properties are due to the removal of the native oxide layer, as was proven by x-ray photoelectron spectroscopy measurements and high-resolution cross-sectional transmission electron microscopy(HRXTEM) results. It was also found that GaSb-based MOSCAPs with HfAlO gate dielectrics have interfacial properties superior to those using HfO2 or Al2O3 dielectric layers.     

两种铽配合物与PVK混合体系的发光机理研究

研究了稀土配合物Tb(p-MBA)₃phen(样品Ⅰ)和Tb(p-ClBA)₃phen(样品Ⅱ)与导电聚合物材料PVK掺杂体系的光致发光和电致发光特性。发现在样品Ⅰ与PVK混合薄膜的光致发光中,除了三价铽离子的发光外,还能看到明显的PVK的发光;而在电致发光中,PVK的发光完全被抑制,只能看到Tb3+的绿光发射。对样品Ⅱ与PVK的混合发光层,无论其光致发光谱还是电致发光谱,都没有看到410 nm处PVK的发射。进一步测量两种材料的激发光谱,初步探讨了器件的发光机理。样品Ⅰ的发光可能来源于两个方面,一是PVK到稀土配合物的不完全的能量传递,二是由于载流子俘获机理;样品Ⅱ的发光则是由于PVK到稀土配合物的完全的能量传递。     

吖啶红与铬(Ⅵ)的高灵敏度荧光反应及应用

研究了在硫酸介质中,铬(Ⅵ)氧化吖啶红荧光增强反应的最佳实验条件,建立了测定痕量铬(Ⅵ)的新的高灵敏度荧光分析法。该方法的检出限为0.6 μg·L-1,线性范围为2.0～32 μg·L-1,对含量为4.0和28 μg·L-1的Cr(Ⅵ)标准溶液进行11次平行测定, 其相对标准偏差分别为2.0%和1.0%。该法用于电镀液、废铬酸洗液及合金钢中痕量铬(Ⅵ)的测定,与标准样品和二苯碳酰二肼分光光度法进行了对照,获得了满意结果。     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.     

高职物理教学中的合成与分解

高职物理教学中涉及到合成与分解的地方主要有两处：一是力的合成与分解，另一是运动的合成与分解。由于学生在初中物理和数学教学中从未学过矢量概念，而高职数学中矢量的教学又要到很迟才进行，学生学习“合成与分解”的困难很多，笔者从以下几方面进行尝试，以解决学生在学习中的难点，消除模糊认识。     

Superamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal methodSuperamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal methodSuperamphiphobic,light-trapping FeSe2 particles with a micro-nano hierarchical structure obtained by an improved solvothermal method

Wettability and the light-trapping effect of FeSe2 particles with a micro-nano hierarchical structure have been inves- tigated. Particles are synthesized by an improved solvothermal method, wherein hexadecyl trimetbyl ammonium bromide （CTAB） is employed as a surfactant. After modifying the particles with heptadecafluorodecyltrimethoxy-silane （HTMS）, we find that the water contact angle （WCA） of the FeSe2 particles increases by 6.1~ and the water sliding angle （WSA） decreases by 2.5~ respectively, and the diffuse reflectivity decreases 29.4% compared with similar FeSe2 particles synthe- sized by the conventional method. The growth process of the particles is analyzed and a growth scenario is given. Upon altering the PH values of the water, we observe that the superhydrophobic property is maintained quite consistently across a wide PH range of 1-14. Moreover, the modified particles were also found to be superoleophobic. To the best of our knowledge, there is no systematic research on the wettability of FeSe2 particles, so our research provides a reference for other researchers.     

球磨法对不同基质上转换发光的影响

分别利用高温固相法和高能球磨法,在反应温度为1 100 ℃、反应时间为2 h的条件下合成了以Y₂O₃、La₂O₃、LiTaO₃为基质的双掺和三掺Tm³⁺、Er³⁺、Yb³⁺发光粉。XRD测试结果表明,高能球磨法制备的Y₂O₃、La₂O₃、LiTaO₃材料的相纯度高于高温固相法。用980 nm红外激光分别对两种合成方法制得的样品粉末进行发光性质的检测,结果表明高能球磨法制得样品的发光强度高于高温固相法样品。不同基质样品的上转换发光性质表现为：Tm³⁺、Yb³⁺掺杂呈蓝光;Er³⁺、Yb³⁺掺杂呈黄光;Tm³⁺、Er³⁺、Yb³⁺三掺样品的发光减弱,颜色可调。     

Engineering Double-Walled Carbon Nanotubes by Ar Plasma

Double-walled carbon nanotubes （DWCNTs） have been found to be promising nano-materials for nano-mechanical and nano-electrical devices due to their double-walled structures. Modifying DWCNTs would be one of the key technologies for device construction. We demonstrate engineering the geometry of DWCNTs by etching with Ar plasma. The characterization by atomic force rnicroscopy indicates that single atomic carbon layers could be removed from DWCNTs by Ar plasma. The etching effect is further investigated by electrical measurements on DWCNT field-effect transistors, which allow us to study the interwall screen effect as well.     

Hydrothermal Preparation of Photoluminescent Graphene Quantum Dots Characterized Excitation‐Independent Emission and its Application as a Bioimaging Reagent

Zero‐dimensional photoluminescent (PL) graphene quantum dots (GQDs) that can be used as the cell‐imaging reagent are prepared by a hydrothermal route using the graphene oxide (GO) as the carbon source. Under the optimized hydrothermal conditions, an initial hydrogen peroxide concentration of 0.5 mg mL^?1 at 180 °C for 120 min, the GO sheets can be cut into nanocrystals with lateral dimensions in the range of 1.5–5.5 nm and an average thickness of around 1.1 nm. The as‐prepared GQDs exhibit an abundance of hydrophilic hydroxy and carboxyl groups and emit bright blue luminescence with up‐conversion properties in a water solution at neutral pH. Most interestingly, they indicate excitation‐independent emission characteristics, and the surface state is demonstrated to have a key role in the PL properties. The fluorescence quantum yield of the GQDs is tested to be around 6.99% using quinine sulfate as a standard. In addition, the as‐prepared GQDs can enter into HeLa cells easily as a fluorescent imaging reagent without any further functionalization, indicating they are aqueous stability, biocompatibility, and promising for potential applications in biolabeling and solution state optoelectronics.     

低温液体管路输送中几个问题的分析

对低温液体传输过程中气体置换、预冷过程、竖直管道中间歇泉现象、盲支管填充时和阀门开启时的不稳定现象作了较详细分析,指出了其可能造成的危害,并提出了相应的解决方法。