A Novel endo-1,4-β-Mannanase from <Emphasis Type="Italic">Bispora antennata</Emphasis> with Good Adaptation and Stability over a Broad pH Range

An endo-β-1,4-mannanase encoding gene, man5, was cloned from Bispora antennata CBS 126.38, which was isolated from a beech stump. The cDNA of man5 consists of 1,299 base pairs and encodes a 432-amino-acid protein with a theoretical molecular mass of 46.6 kDa. Deduced MAN5 exhibited the highest amino acid sequence identity of 58% to a β-mannanase of glycoside hydrolase family 5 from Aspergillus aculeatus. Recombinant MAN5 was expressed in Pichia pastoris and purified to electrophoretic homogeneity. The specific activity of the final preparation towards locust bean gum was 289 U mg⁻¹. MAN5 showed optimal activity at pH 6.0 and 70 °C and had good adaptation and stability over a broad range of pH values. The enzyme showed more than 60% of peak activity at pH 3.0–8.0 and retained more than 80% of activity after incubation at 37 °C for 1 h in both acid and alkaline conditions (pH 4.0–11.0). The K _m and V _max values were 1.33 mg ml⁻¹ and 444 μmol min⁻¹ mg⁻¹ and 1.17 mg ml⁻¹ and 196 μmol min⁻¹ mg⁻¹ for locust bean gum and konjac flour, respectively. Of all tested metal ions and chemical reagents, Co²⁺, Ni²⁺, and β-mercaptoethanol enhanced the enzyme activity at 1 mM, whereas other chemicals had no effect on or partially inhibited the enzyme activity. MAN5 was highly resistant to acidic and neutral proteases (trypsin, α-chymotrypsin, collagenase, subtilisin A, and proteinase K). By virtue of the favorable properties of MAN5, it is possible to apply this enzyme in the paper and food industries.     

Solvent effects on isomerization and spectral properties of photochromic-switching diarythene derivatives in polar and apolar solutions

The photocyclization behavior and dynamic conformational transition of photochromic switches of diarythene derivatives in solutions are investigated by using the density functional theory (DFT) and molecular dynamics (MD) simulations. Three possible conformations, antiparallel (anti), parallel (para), and twist, for the open-ring isomers of 1,2-bis(2-methylbenzothiophene-3-yl)maleic anhydride are located. Both PCM-B3LYP/6-31G* calculations and MD simulations demonstrate that anti and twist open-ring isomers can interconvert freely in n-hexane and acetonitrile solutions at room temperature. The statistical ratio of twist to anti isomers from MD simulations is 2.09 in n-hexane and 1.07 in CH(3)CN, in qualitative agreement with those (1.18 in n-hexane and 1.05 in CH(3)CN) estimated from Arrhenius analysis of DFT activation energies. The solvent polarity has little influence on the isomerization of open-ring isomers in the ground state. Due to the evident charge transfer upon excitations, the solvent effects on the electronic structures and absorption spectra of low-lying excited states (S(1) and S(2)) are more significant. For such charge-transfer excited states, the long-range corrected functional CAM-B3LYP gives better agreement with the experimental spectra than B3LYP. The solvent polarity and polarization of the charge-transfer excited states are crucial for fabricating the novel functionalized photochromic molecular switches.     

Ionic pair complexes with well-separated columnar stack structure based on [Pt(mnt)2]- ions showing unusual magnetic transition: syntheses, crystal structures, and magnetic properties

Three ion pair complexes, [4-R-benzylpyridinium][bis(maleodinitriledithiolato)platinum(III)] (abbreviated as [RBzPy][Pt(mnt)(2)]; R = Cl (1), Br (2), or NO(2) (3)), have been synthesized. The cations and anions stack into well-separated columns in the solid state, and the Pt(III) ions form a 1-D zigzag chain within a [Pt(mnt)(2)](-) column through Pt...S, S...S, and Pt...S...Pt interactions. The chain is uniform in 1 and 2, while it alternates in 3. Unusual magnetic phase transitions from paramagnetism to diamagnetism were observed in these three complexes at approximately 275 K for 1, approximately 269 K for 2, and approximately 184 K for 3. These phase transitions were also found in DSC measurements for 1 and 2. The overall magnetic behaviors for 1-3 indicate the presence of antiferromagnetic exchange interactions in the high-temperature phase and spin-gapped systems in the low-temperature phase. Below 50 K, 2 exhibits weak ferromagnetism. The spontaneous moments are nearly repressed by a field of 1.0 T. The crystal structure of 2 at 173 K reveals that there are two crystallographically independent [Pt(mnt)(2)](-) entries in an asymmetric unit. These two crystallographically independent [Pt(mnt)(2)](-) entries satisfy the spin-canting condition, and the EPR spectra measured at room temperature exhibit anisotropic character. Therefore, the weak ferromagnetic behavior in the low-temperature region for 2 can be attributed to the spin-canting phenomenon.     

Monodisperse rutile microspheres with ultrasmall nanorods on surfaces: Synthesis, characterization, luminescence, and photocatalysis

This work demonstrates the process of building optoelectrically cooperative surface wetting in smart and precise way. The superhydrophobic photosensitive film is constructed with TiO(2) nanotube arrays. Compared with conventional organic dyes, CdS quantum dots (QDs) as sensitizer layer are modified on TiO(2) nanotubes surface to improve photosensitivity of the composited surface in visible light region, which offer the benefit for designing and fabricating solid state hetero-junction devices. ITO glass is introduced as top electrode to apply electrical and optical stimuli and the patterned wetting is instantly obtained with masking light through ITO. The optoelectrically cooperative wettability conversion occurred on superhydrophobic TiO(2) nanotube surface at critical voltage of 12 V, which was decreased by 18 V comparing with only using electric stimulus. This study provides potential applications for TiO(2) nanotube arrays to the associated research of liquid reprography, location-controlled microfluidic device and lab-on-chip.     

A facile two-step etching method to fabricate porous hollow silica particles

We report here the fabrication of hollow silica particles with mesopores larger than 10 nm on their wall via a facile two-step etching method. Different from the conventional template method, the new method uses the silica particles as starting materials, which were synthesized using the well-known Stöber method. In the hollow silica preparation, first, we gently etch the silica particles with a NaOH solution without using template molecules to make them porous. Then, we coat the porous silica particles with poly-dimethyldiallylammonium chloride (PDDA) and treat the PDDA-coated porous silica with an ammonia solution to form the hollow silica nanospheres. In this study, we found that the NaOH dosage and ammonia concentration have significant impact on the morphology of the final products. Adsorption was also studied and results show that the hollow nanospheres can effectively uptake protein-based biomolecules (hemoglobin).     

Second-Generation Covalent TMP-Tag for Live Cell Imaging

Chemical tags are now viable alternatives to fluorescent proteins for labeling proteins in living cells with organic fluorophores that have improved brightness and other specialized properties. Recently, we successfully rendered our TMP-tag covalent with a proximity-induced reaction between the protein tag and the ligand-fluorophore label. This initial design, however, suffered from slow in vitro labeling kinetics and limited live cell protein labeling. Thus, here we report a second-generation covalent TMP-tag that has a fast labeling half-life and can readily label a variety of intracellular proteins in living cells. Specifically, we designed an acrylamide-trimethoprim-fluorophore (A-TMP-fluorophore v2.0) electrophile with an optimized linker for fast reaction with a cysteine (Cys) nucleophile engineered just outside the TMP-binding pocket of Escherichia coli dihydrofolate reductase (eDHFR) and developed an efficient chemical synthesis for routine production of a variety of A-TMP-probe v2.0 labels. We then screened a panel of eDHFR:Cys variants and identified eDHFR:L28C as having an 8-min half-life for reaction with A-TMP-biotin v2.0 in vitro. Finally, we demonstrated live cell imaging of various cellular protein targets with A-TMP-fluorescein, A-TMP-Dapoxyl, and A-TMP-Atto655. With its robustness, this second-generation covalent TMP-tag adds to the limited number of chemical tags that can be used to covalently label intracellular proteins efficiently in living cells. Moreover, the success of this second-generation design further validates proximity-induced reactivity and organic chemistry as tools not only for chemical tag engineering but also more broadly for synthetic biology.     

A magnetic resonance imaging contrast agent capable of detecting hydrogen peroxide

The redox-active ligand N-(2-hydroxy-5-methylbenzyl)-N,N',N'-tris(2-pyridinylmethyl)-1,2-ethanediamine (Hptp1) was prepared and complexed to manganese(II). The isolated [Mn(Hptp1)(MeCN)](2+) serves as a magnetic resonance imaging contrast agent, with an r(1) value comparable to those of other mononuclear gadolinium(III) and manganese(II) complexes. The metal and ligand are stable in aerated aqueous solutions, but the addition of H(2)O(2) causes the complex to oxidatively couple to itself through a bimolecular reaction involving the phenol groups of two Hptp1 ligands. The binuclear product is less paramagnetic per manganese(II) than its mononuclear precursor, lowering the measured r(1) per manganese(II). The manganese(II) complex with Hptp1 can thereby serve as a sensor for oxidative stress.     

Self-assembly and emulsification of poly{[styrene-alt-maleic acid]-co-[styrene-alt-(N-3,4-dihydroxyphenylethyl-maleamic acid)]}

Self-assembled polymeric micelles can be used as efficient particulate emulsifiers. To explore the relationship between the structure and the oil-water interfacial behavior of the micelle emulsifiers, a new type of amphiphilic random copolymer, poly{(styrene-alt-maleic acid)-co-[styrene-alt-(N-3,4-dihydroxyphenylethyl-maleamic acid)]} (SMA-Dopa), was synthesized, self-assembled into micelles, and used as emulsifiers. SMA-Dopa was synthesized via an aminolysis reaction between dopamine and commercial alternating copolymer poly(styrene-alt-maleic anhydride) (SMA). Dopamine moiety facilitated the self-assembly of the SMA-Dopa in selective-solvent into stable micelles, and increased the adsorption of the SMA-Dopa at the oil-water interface. Additionally, the structural transition of the self-assembled SMA-Dopa52 micelles in response to pH and salinity changes were confirmed by means of TEM, AFM, DLS, aqueous electrophoresis techniques, potentiometric titration, and pyrene fluorescence probe methods. Micelles shrunk with increasing salinity, and flocculation of the shrunken primary micelles occurred at salt concentration exceeding 0.1 M. The micelles swelled with increasing pH, and the disassociation of the SMA-Dopa52 micelles occurred at pH above approximately 6.5. The structure of the micelles plays a crucial role in the oil-water interfacial performance. Micelles with various structures were used as emulsifiers to adsorb at the styrene-water and toluene-water interfaces. The emulsifying characteristics demonstrated that self-assembled SMA-Dopa52 micelles with moderately swollen structure (at 2 < pH < 6) combine the advantages of the solid particulate emulsifiers and polymeric surfactants, possessing excellent emulsifying efficiency and good emulsion stability. Moreover, the emulsifying performance of the SMA-Dopa52 micelles could be enhanced by the addition of salt.