PSF/TiO2杂化超滤膜形成过程的热力学和动力学研究

采用溶胶-凝胶法制备了不同纳米TiO₂含量的聚砜(PSF)/TiO₂杂化超滤膜, 研究了TiO₂浓度对聚砜铸膜液流变学及热力学性质的影响, 构建了计算成膜过程中表观扩散系数(D_a)的新方法, 求出不同TiO₂浓度及温度下的D_a值, 进而剖析了铸膜液流变学和热力学性质的变化对成膜动力学的影响. 并通过扫描电镜观察、杂化膜孔隙率和超滤性能的测试考察了表观扩散系数与膜结构和性能的关系. 结果表明, 加入TiO₂溶胶的PSF铸膜液由牛顿流体转变为非牛顿流体, 其粘度随TiO₂浓度增大而增大. TiO₂的加入减小了铸膜液对非溶剂的容纳能力, 加速铸膜液的液-液相分离, 同时TiO₂引起的热力学促进作用和流变学阻碍作用相互竞争, 共同影响D_a的变化. 实验得出, D_a随温度升高而增大, 随TiO₂浓度的增大有先增大后减小的趋势. 表观扩散系数D_a与膜的结构和性能具有很好的相关性并能直观地描述整个成膜过程.     

PP/PS共混体系相结构形成与演变

以连续共混过程中间歇出料法研究了聚丙烯(PP)/聚苯乙烯(PS)体系共混过程中的扫描电镜图样演化过程,利用小角激光散射(SALS)证明了PP/苯乙烯-乙烯-丙烯嵌段共聚物(SEP)/PS体系的部分相容性,同时说明SALS研究聚合物熔体动态过程的有效性.针对扫描电镜图样,用重心粒径dg这一结构参数研究了PP/PS体系共混过程,利用分布函数求取了分散相PP分形维数,对共混过程中相分散进行了研究.     

A novel 3D mammalian cell perfusion-culture system in microfluidic channels

Mammalian cells cultured on 2D surfaces in microfluidic channels are increasingly used in drug development and biological research applications. These systems would have more biological or clinical relevance if the cells exhibit 3D phenotypes similar to the cells in vivo. We have developed a microfluidic channel based system that allows cells to be perfusion-cultured in 3D by supporting them with adequate 3D cell-cell and cell-matrix interactions. The maximal cell-cell interaction was achieved by perfusion-seeding cells through an array of micropillars; and 3D cell-matrix interactions were achieved by a polyelectrolyte complex coacervation process to form a thin layer of matrix conforming to the 3D cell shapes. Carcinoma cell lines (HepG2, MCF7), primary differentiated (hepatocytes) and primary progenitor cells (bone marrow mesenchymal stem cells) were perfusion-cultured for 72 hours to 1 week in the microfluidic channel, which preserved their 3D cyto-architecture and cell-specific functions or differentiation competence. This transparent 3D microfluidic channel-based cell culture system also allows direct optical monitoring of cellular events for a wide range of applications.     

Cr/MCM-41催化剂上的乙烯聚合行为

以纯硅ＭＣＭ４１为载体，负载Ｐｈｉｌｉｐｓ烯烃聚合催化剂活性组分Ｃｒ．ＸＲＤ及ＴＥＭ表征结果表明，所得到的Ｃｒ／ＭＣＭ４１催化剂具有良好的晶体结构和较理想的长程有序一维孔道．ＦＴＩＲ和Ｒａｍａｎ光谱表征结果表明，Ｃｒ／ＭＣＭ４１上不仅可发生乙烯聚合过程，而且形成的聚乙烯以结晶和无定形两种形态存在．乙烯聚合活性不仅与反应参数有关，而且与Ｃｒ的负载量密切相关．用于乙烯聚合后，Ｃｒ／ＭＣＭ４１催化剂仍保持其特征的晶体结构和一维孔道结构．     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

新工科项目“地方(行业)高校化学类专业应对产业变化的升级改造研究与实践”的实施

This "emerging engineering education (3E)" project "Upgrade and Practice of Chemistry-related Majors of Local and/or Specialized University Responding to the Industry Changes" was supported by the Ministry of Education. To aim at the issue of how to upgrade the chemistry-related majors of a local and/or specialized university responding to industry changes, an investigation on local regional economy and industry changes was carried out, the capability requirements of 3E for talents were analyzed, and the training objectives, graduation requirements as well as the new teaching models were also studied for the major to meet the future requirements. The practical experience for 3E construction of chemistry-related majors by selected universities was suggested.     

含长丙烯序列无规乙丙共聚物的合成与表征

用δ-TiCl₃-Et₂AlCl催化剂,以庚烷作溶剂,在单体C₃含量>60mol%的情况下,乙丙常压共聚可得到含长丙烯序列无规乙丙共聚物(LP-EPR)。其特性粘数〔η〕在2—3dl/g之间。影响〔η〕的主要因素是〔Al〕/〔Ti〕比、聚合温度和时间。共聚物的组成主要依赖单体C₃含量。通过庚烷萃取、红外、扭摆、x-射线衍射及相差显微镜等方法证明,在共聚物的无规乙丙分子链中含有全同聚丙烯(PP)序列,序列含量直接影响共聚物的结晶度、强度和硬度。     

海绵Spongia sp.化学成分的研究（I）

应用气相色谱－质谱联用技术从海绵Ｓｐｏｎｇｉａ ｓｐ．中分离鉴定出４个化学成分：１．－氯－２,２－二对氯苯基乙烯（ＤＤＭＵ,Ｉ）、１,１－二氯－２,２－二对氯苯基乙烯（ＤＤＥ,Ⅱ）、１,１－二氯－２,２－二对氯苯乙烷（ＤＤＤ,Ⅲ）和角鲨烯（Ⅳ）。前３个化合物是首次从Ｓｐｏｎｇｉａ属海绵中分离得到。     

GC-MS法测定大气样品的前处理研究--碳化纤维树脂捕集大气中痕量多环芳烃

研究了碳化纤维树脂吸附载体采集大气中多环芳烃(PAHs)的性能、样品前处理条件和毛细管气相色谱－质谱联用仪检测PAHs的,地具有代表性的多个采样点进行了实地采样、分析,证明碳化纤维树脂吸附载体是一种性能独特的固相吸附剂,建立的样品前处理方法可行,分析数据可靠,可用于大气中PAHs的检测。     

锌—镉法测定天然水中硝酸盐的盐误差及其解决方法

研究了锌-镉法测定天然水中硝酸盐的盐误差,发现水中含盐量对还原率有重大影响,但在盐度为1%以后还原率基本不变;加入人工海盐(1.5g/50ml水样)可消除盐误差.由此建立了没有盐误差的新的锌-镉法.方法相对标准偏差小于3%,回收率为98%～102%,与镉-铜法对比,两种方法的相对偏差小于8%.