Multi-reference lens-less Fourier-transform holography with a Greek-ladder sieve array

Lens-less Fourier-transform holography has been actively studied because of its simple optical structure and its single-shot recording.However,a low-contrast interferogram between the reference and object waves limits its signal to noise ratio.Here,multi-reference lens-less Fourier-transform holography with a Greek-ladder sieve array is proposed in the experiment and demonstrated effectively to improve the signal to noise ratio.The key technique in our proposed method is a Greek-ladder sieve array,which acts as not only a wave-front modulator but also a beam splitter.With advantages of the common path,single shot,and no need for a lens,this system has enormous potential in imaging and especially in extreme ultraviolet and soft X-ray holography.     

The optical nonreciprocal response based on a four-mode optomechanical system

We propose a scheme for realizing the optical nonreciprocal response based a four-mode optomechanical system,consisting of two charged mechanical modes and two linearly coupled optical modes. Two charged mechanical modes are coupled by Coulomb interaction, and two optical modes are coupled to one of mechanical modes by radiation pressure. We numerically evaluate the transmission probability of the probe field to obtain the optimum optical nonreciprocal response parameters. Also, we show that the optical nonreciprocal response is caused by the quantum interference between the optomechanical couplings and the linearly coupled interaction that breaks the time-reversal symmetry.     

Multicaloric and coupled-caloric effects

The multicaloric effect refers to the thermal response of a solid material driven by simultaneous or sequential application of more than one type of external field.For practical applications,the multicaloric effect is a potentially interesting strategy to improve the efficiency of refrigeration devices.Here,the state of the art in multi-field driven multicaloric effect is reviewed.The phenomenology and fundamental thermodynamics of the multicaloric effect are well established.A number of theoretical and experimental research approaches are covered.At present,the theoretical understanding of the multicaloric effect is thorough.However,due to the limitation of the current experimental technology,the experimental approach is still in progress.All these researches indicated that the thermal response and effective reversibility of multiferroic materials can be improved through multicaloric cycles to overcome the inherent limitations of the physical mechanisms behind single-field-induced caloric effects.Finally,the viewpoint of further developments is presented.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

高效液相色谱法测定柑橘汁中的柠檬苦素和柚皮苷

柑橘汁的苦味主要是由于柚皮苷和柠檬苦素的存在所致,其含量的测定可用于控制柑橘类果汁的质量。采用高效液相色谱法在KR100-5C18(4.6 mm i.d.×250 mm,5 μm)上,分别以乙腈-四氢呋喃-水(体积比为17.5∶17.5∶65)和甲醇-冰醋酸-水(体积比为40∶1∶59)为流动相（流速均为1 mL/min）,在207 nm和283 nm检测波长下分别测定了柠檬苦素和柚皮苷。实验结果表明,柠檬苦素在1.00～50.00 mg/L时线性关系良好(r=0.9992),检出限为0.07 μg,平均加标回收率为98.69%,相对标准偏差（RSD）为2.5%;柚皮苷在20.00～160.00 mg/L时线性关系良好(r=0.9988),检出限为0.14 μg,平均加标回收率为100.13%,RSD为1.5%。用该法检测柑橘汁样品中的柠檬苦素与柚皮苷,方法简便、快速、准确。     

合成2-乙基蒽醌的新方法

合成2-乙基蒽醌的新方法;乙基苯甲酰基苯甲酸;乙基蒽醌;H-Beta沸石分子筛;柠檬酸改性     

石英芯片电泳分离检测尿中蛋白的研究

通过对缓冲体系、缓冲液浓度、酸度、乳酸钙浓度、乙胺浓度、电泳电压和进样时间的优化选择，用石英芯片电泳一紫外检测法分离了纯人白蛋白和人运铁蛋白；在75mmol／L硼酸盐（pH10．55）（含0．8mmol／L乳酸钙、1％（φ）乙胺）运行缓冲液中，上述两组分在3min内完全分离；纯人白蛋白和人运铁蛋白的线性范围分别为1．0～15．0g/L和1．0～10．0g／L；检出限（S／N=3）均为0．5g／L，应用于临床尿蛋白分离测定，并与Helena琼脂糖凝胶电泳仪电泳结果进行比较，获得一致结果。     

预富集-氢化物发生原子吸收光谱法测定饮料中的痕量铅

原子吸收光谱法测定水样中的痕量元素是应用得最广泛的方法之一[1]。有时需采用多种方法对水样中的痕量元素进行富集。其中一类方法是基于待测元素配合物可以最终定量富集于少量颗粒上,过滤收集这些颗粒,然后制成小体积的、可直接用原子吸收光谱法测定的悬浊液。特定的配位剂分     

流动注射化学发光法测定大豆异黄酮

基于在NaOH碱性介质中,K3Fe(CN)6可以直接氧化大豆异黄酮产生强的化学发光这一现象,并结合流动注射分析技术,提出了直接化学发光测定大豆异黄酮含量的新方法。当K3Fe(CN)6浓度为5.0×10-4mol/L,NaOH浓度为0.5 mol/L,主副蠕动泵转数分别为45 r/m in和35 r/m in时,体系具有最强的化学发光。该方法测定大豆异黄酮的线性范围为1.0×10-3~0.5 g/L;其回归方程为A(峰面积)=193305C(mg/L) 229.97,r=0.9962;检出限为4.6×10-4g/L。对5.0×10-3g/L大豆异黄酮溶液连续测定,每次得3个峰值,重复7次,相对标准偏差为2.46%。本方法已用于大豆中异黄酮含量的测定。     

AQC柱前衍生反相高效液相色谱法测定土壤中氨基酸

以2-氨基丁酸为内标物,6-氨基喹啉基-N-羟基琥珀酰亚氨基甲酸酯(AQC)为柱前衍生试剂,用XTerraC18柱,1.8mmol/L甲酸铵溶液(pH=3.0)和乙腈为流动相,采用梯度洗脱,光电二极管(PDA)检测器在248nm波长处检测,建立了一种利用反相高效液相色谱同时测定土壤中17种氨基酸的分析方法。方法重现性好,精密度高,氨基酸浓度在25~600μmol/L范围内,线性相关系数均大于0.99;各氨基酸检出限≤0.5pmol。并且在该色谱条件下,获得了灵敏度较高,彼此分离良好的17种AQC衍生氨基酸的LC-MS质谱总离子流图,为今后土壤氨基酸的深入研究提供了更加有利的手段。