Glucocorticoids have a certain whitening effect on the skin. However, frequent and long‐term use of cosmetics including glucocorticoids is harmful to health. Herein, we proposed a novel micro‐solid phase extraction method for the detection of prednisolone acetate, prednisone, and prednisolone in cosmetics coupled with high‐performance liquid chromatography. In this method, porous monolithic polymer micro‐extraction bars were prepared by “one‐step, one‐pot” in situ photopolymerization combined with sacrificial support in hollow fiber under water atmosphere. The crucial factors such as pH of sample solution, extraction, and elution times that influence micro‐extraction were optimized and found to be 9.0, 2 h, and 32 min, respectively. Under the optimum experimental conditions, the linear range of the calibration curves were from 5.0 to 2000 µg/L with correlation coefficients (R2) between 0.9922 and 0.9996. The limit of detection and limit of quantification were 1.5 µg/L and 5.0 µg/L, respectively, and the recoveries were found to be in range of 69.0–113.3%. The analysis of precision for intraday and interday were less than 10.40 and 10.59%. The device has been successfully achieved photopolymerization under water atmosphere. The results indicated that this method is simple, accurate, and satisfactory for the pretreatment and determination of glucocorticoids in complex cosmetics samples. 相似文献
To enhance the extraction performance, a mesoporous silica was modified with ordered mesoporous carbon for solid‐phase microextraction. Three stainless‐steel wires coated with the mesoporous material were placed in a polyetheretherketone tube for getting an extraction tube. The tube was coupled to high‐performance liquid chromatography with diode array detector, and the online analysis system was constructed. Then its extraction performance was evaluated using hydrophobic polycyclic aromatic hydrocarbons, phthalates, and hydrophilic neonicotinoids. The best selectivity was presented for polycyclic aromatic hydrocarbons. Several main conditions were optimized such as sampling volume, sampling rate, methanol concentration in the sample, and desorption time, a rapid and sensitive analytical method was established toward polycyclic aromatic hydrocarbons. The analytical method exhibited wide linear range from 0.017 to 15 µg/L with acceptable correlation coefficients more than 0.9990, limits of detection in 0.005‐0.020 µg/L, limits of quantification ranging from 0.017 to 0.066 µg/L as well as large enrichment factors of 377‐2314. It was successfully applied to detect trace polycyclic aromatic hydrocarbons in some real water samples including tap water, snow water, and domestic sewage. 相似文献
Alkaloids are a widespread group of basic compounds in herbal medicines and have attracted great interest due to various pharmaceutical activities and desirable druggability. Their distinctive structures make chromatographic separation fairly difficult. Peak tailing, poor resolution, and inferior column‐to‐column reproducibility are common obstacles to overcome. In order to provide a valuable reference, the methodologies and/or strategies on liquid chromatographic separation of alkaloids in herbal medicines proposed from 2012 to 2019 are thoroughly summarized. 相似文献
Three kinds of through-space charge transfer(TSCT) blue polymers containing non-conjugated polystyrene backbone together with spatially-separated acridan donor and oxygen-bridged triphenylboron acceptors having different substituents of tert-butyl,hydrogen and fluorine are designed and synthesized. The designed TSCT blue polymers possess photoluminescence quantum yields up to 70% in solid-state film, single-triplet energy splitting below 0.1 eV, and typical thermally activated delayed fluorescence(TADF) effect. Meanwhile, the resulting polymers exhibit aggregation-induced emission(AIE) effect with emission intensity increased by up to ~27 folds from solution to aggregation state. By changing the substituent of acceptors to tune the charge transfer strength, blue emission with peaks from 444 to 480 nm can be realized for the resulting polymers.Solution-processed organic light-emitting diodes based on the polymers exhibit excellent device performance with Commission Internationale de L'Eclairage(CIE) coordinates of(0.16, 0.27), together with the maximum luminous efficiency of 30.7 cd A~(-1) and maximum external quantum efficiency of 15.0%, which is the best device efficiency for blue TADF polymers. 相似文献
A photocatalytic E to Z isomerization of alkenes using an iridium photosensitizer under mild reaction conditions is disclosed. This method provides scalable and efficient access to Z‐cinnamyl ether and allylic alcohol derivatives in high yields with excellent stereoselectivity. Importantly, this method also provides a powerful strategy for the selective synthesis of Z‐magnolol and honokiol derivatives possessing potential biological activity. 相似文献
Recently, low‐dimensional organic‐inorganic hybrid metal halide perovskites acting as single‐component white‐light emitting materials have attracted extensive attention, but most studies concentrate on hybrid lead perovskites. Herein, we present two isomorphic zero‐dimensional (0D) hybrid cadmium perovskites, (HMEDA)CdX4 (HMEDA=hexamethylenediamine, X=Cl ( 1 ), Br ( 2 )), which contain isolated [CdX4]2? anions separated by [HMEDA]2+ cations. Under UV light excitation, both compounds display broadband bluish white‐light emission (515 nm for 1 and 445 nm for 2 ) covering the entire visible light spectrum with sufficient photophysical stabilities. Remarkably, compound 2 shows a high color rendering index (CRI) of 83 enabling it as a promising candidate for single‐component WLED applications. Based on the temperature‐dependent, powder‐dependent and time‐resolved PL measurements as well as other detailed studies, the broadband light emissions are attributed to self‐trapped excitons stemming from the strong electron‐phonon coupling. 相似文献
In this study, the wave propagation properties of piezoelectric sandwich nanoplates deposited on an orthotropic viscoelastic foundation are analyzed by considering the surface effects (SEs). The nanoplates are composed of a composite layer reinforced by graphene and two piezoelectric surface layers. Utilizing the modified Halpin-Tsai model, the material parameters of composite layers are obtained. The displacement field is determined by the sinusoidal shear deformation theory (SSDT). The Euler-Lagrange equation is derived by employing Hamilton’s principle and the constitutive equations of piezoelectric layers considering the SEs. Subsequently, the nonlocal strain gradient theory (NSGT) is used to obtain the equations of motion. Next, the effects of scale parameters, graphene distribution, orthotropic viscoelastic foundation, and SEs on the propagation behavior are numerically examined. The results reveal that the wave frequency is a periodic function of the orthotropic angle. Furthermore, the wave frequency increases with the increase in the SEs.