Hydrogels in aqueous phases of polyvinylalcohol (PVA), surfactants and clay minerals

Aqueous solutions of synthetic clay minerals have been studied in the presence of surfactants and water-soluble polyvinylalcohol (PVA). The PVAs (PVA 1, PVA 2) had a molecular weight of about 10⁵ Dalton and a degree of hydrolysis of 82%. The PVA-samples were surface active and lowered the surface tension to 43 mN/m. As a consequence of their amphiphilic nature the PVA molecules bind strongly to clay mineral particles. On saturation the clay mineral particles adsorb the fivefold weight of PVA of their own weight. It is concluded that the thickness of the adsorbed layers on both sides of the clay mineral is in the range of the hydrodynamic diameter of the PVA-coils in the bulk phase.When the clay mineral particles are not saturated with PVA, they act as cross-linking agents for the PVA. The whole systems are physically cross-linked and assume gel-like properties. Rheological measurements show that samples behave like soft matter with a yield stress value. All of them have a frequency independent storage modulus which is an order of magnitude larger than the loss modulus. The hydrogels become stronger as PVA concentration increases.Small amounts of cationic surfactants bind on the clay mineral. The interface of the clay mineral becomes more hydrophobic and the binding of the PVA on the clay mineral is strengthened. With rising concentration of the surfactant the surfactant molecules bind on PVA and the PVA becomes hydrophilic. As a consequence the PVA can no longer bind on the clay mineral and the gels transform to viscous and turbid solutions. Small amounts of cationic surfactants therefore stiffen the hydrogels while larger amounts cause phase separation and a solution with low viscosity. Anionic surfactants like SDS do not bind on the clay mineral, but strongly on the PVA. With increasing SDS concentration, the hydrogels become stiffer at first but thereafter they break and transform to viscous fluids.In PVA-solutions without the clay minerals both cationic and anionic surfactants bind to the PVAs in the aqueous solution. With increasing concentration of surfactant, the viscosities of the solutions pass over a maximum. In this respect the PVAs behave like hydrophobically modified water soluble polymers. The surfactants bind to the hydrophobic microdomain and thereby crosslink the polymer molecules. On saturation the polyvinyl alcohol with anionic surfactant become hydrophilic and the network character disappears to a certain extent.     

中药配方颗粒红外光谱法的快速鉴别

采用红外光谱法对中药配方颗粒及其辅料进行了鉴别研究。结果表明：不同生产厂商的配方颗粒中所添加的辅料类型及用量有较大差别；不同种的配方颗粒在辅料含量较低的情况下有较明显的指纹性，而辅料含量较高时，采用差谱技术可以提高谱图的指纹性，达到中药配方颗粒--鉴别的目的。该法简便、快速、可靠，是中药配方颗粒宏观质控的一个强有力的手段。     

Linear scaling local correlation approach for solving the coupled cluster equations of large systems

A linear scaling local correlation approach is proposed for approximately solving the coupled cluster doubles (CCD) equations of large systems in a basis of orthogonal localized molecular orbitals (LMOs). By restricting double excitations from spatially close occupied LMOs into their associated virtual LMOs, the number of significant excitation amplitudes scales only linearly with molecular size in large molecules. Significant amplitudes are obtained to a very good approximation by solving the CCD equations of various subsystems, each of which is made up of a cluster associated with the orbital indices of a subset of significant amplitudes and the local environmental domain of the cluster. The combined effect of these two approximations leads to a linear scaling algorithm for large systems. By using typical thresholds, which are designed to target an energy accuracy, our numerical calculations for a wide range of molecules using the 6-31G or 6-31G* basis set demonstrate that the present local correlation approach recovers more than 98.5% of the conventional CCD correlation energy.     

Synthesis and Crystal Structure of a Novel Compound of （C2N2H8O2） H6V10O28

A novel vanadate decamer, involving all vanadium atoms present in +5 oxidation and one formhydroxamic acid dimer cation readical, has been synthesized. The single-crystal X-ray diffraction shows that the orange crystal is formed in the triclinic system, space group Pi, a = 8. 4960 (17), b = 10.447 (2), c = 11.299 (2) A, α= 68. 82 (3)°,β= 87.35 (3)°, γ = 66.97(3)°. V = 855. 3(3) A3, Z = 8, R1 = 0. 0857, wR2=0. 2551. X-ray crystallographic and packing in superlattice studies showed that the crystal structure was constructed by electrostatic attraction of O-H…O hydrogen bonds between formhydroxamic acid dimer cation and decavanadate polyanion. Formhydroxamic acid dimer is got through controlling the condition of the reaction using formhydroxamic acid.     

<Emphasis Type="Italic">Ab initio</Emphasis> study of small coinage metal telluride clusters Au<Subscript>n</Subscript>Te<Subscript>m</Subscript> (<Emphasis Type="Italic">n,m</Emphasis> = 1, 2)

The geometries of the most stable isomers of gold telluride systems AuTe, Au₂Te, and AuTe₂ are determined using the MP2 method. The aspect of gold—telluride interaction, the electron correlation, and relativistic effects on geometry and stability are investigated at the MP2 and CCSD(T) theoretical levels. The results show that the electron correlation and relativistic effects are responsible not only for gold—gold attraction but also for additional gold—telluride interaction. The gold—telluride interaction is strong enough to modify the known pattern of bare gold clusters. Both effects are essential for determining the geometry and relative stability of this type of systems.     

Synthesis, Characterization and Conductivity of α-Keggin-type Nanoparticles, Co(en)_3PMo_(12)O_(40)·8H_2O with Optical Activity

IntroductionChirality is ubiquitous in the nature.Chiralcompounds have many applications in the areas ofmedicine,catalysis and materials,etc. Polyox-ometallates are inorganic polymers,which have at-tracted much interest since they have electri-cal[1_ 3 ] ,magnetic[4] ,optical properties[5_ 7] ,andsome characters as liquid crystals[8,9] .In this workwe report theα- Keggin structural polyoxometallatenanoparticles with optical activities.The opticalactivities of the samples are [α]13 D =+ 1 7…     

Pre-Column Derivatization of Amines with 1,2-Benzo-3,4-Dihydrocarbazole-9-Isopropyl Chloroformate Followed by LC-Fluorescence and LC-APCI-MS

A pre-column derivatization method for the sensitive determination of amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate (BCIC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives is carried out by high performance liquid chromatography/atmospheric pressure chemical ionization (LC-APCI-MS-MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent is replaced by 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl functional group, which results in a sensitive fluorescence derivatizing reagent BCIC-Cl. BCIC-Cl can easily and quickly label amines. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography and show an intense protonated molecular ion corresponding m/z [MH]⁺ under APCI in positive-ion mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 260 corresponding to the cleavage of CH₂-OCO bond. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0–10.0. Maximal yields close to 100% are observed with a 3 to 4-fold molar reagent excess. In addition, the detection responses for BCIC derivatives are compared with those obtained using CEOC and FMOC as derivatization reagents. The ratios of I_BCIC/I_CEOC and I_BCIC/I_FMOC are, respectively, 1.23–3.14 and 1.25–3.08 for fluorescent (FL) responses (here, I is relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits are calculated from 1.0 pmol injection, at a signal-to-noise ratio of 3, are 10.6–37.8 fmol. The mean interday accuracy ranges from 94 to 105% for fluorescence detection with the largest mean %CV<7.5. The mean interday precision for all standards is < 6.0% of the expected concentration. Excellent linear responses are observed with coefficients of > 0.9997. Revised: 12 December 2005 and 13 Febrauary 2006     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

Baker''''s yeast mediated reduction of substituted acenaphthenequinones: Regio-and enantioselective preparation of mono-hydroxyacenaphthenones

Baker's yeast mediated reduction of acenaphthenequinone within 4-10 h afforded mono-hydroxyacenaphthenone mainly with low enantioselectivity, the substrate and mono-hydroxyacenaphthenone product almost converted to dihydroxyacenaphthene after 48 h. By control of the reaction time and in the presence of DMF as co-solvent, the reduction of 6-substituted acenaphthenequinones under vigorous agitation afforded the corresponding 2-hydroxyacenaphthenones in 24-84% yields with 10-93% ee.     

Quantitative measurement of collagen methylation by capillary electrophoresis

Collagen methylation has been exploited in various applications involving living cells. We have observed correlation between the collagen methylation with the rate of cell proliferation in three-dimensional (3-D) microenvironment. To quantify the degree of collagen methylation, we have developed a capillary zone electrophoresis method. Using a polyvinyl alcohol-coated fused-silica capillary and UV detection at 200 nm, we have optimized pH and separated the native collagen into three major bands in phosphate buffer (50 mM, pH 2.5) with 0.05% hydroxypropylmethylcellulose. Under these conditions, the methylated collagens were separated into four major bands, which changed with different methylation reaction conditions. We propose an index to quantify the degree of collagen methylation that also correlates with their effects on cell proliferation.