多子阵子空间拟合波达方向估计

提出了考虑阵元互耦的子空间拟合波达方向估计方法。用一带状、对称Toeplitz矩阵对均匀线阵的互耦矩阵建模。根据互耦矩阵自由度,去除部分两边阵元,研究了子空间拟合算法中ESPRIT算法的理论性能。在大快拍的情况下,均匀线阵的MCLS-ESPRIT算法的角度估计误差是一个零均值的联合高斯分布,同时给出了分布的协方差表达式。由方差的数值计算可知,在阵元数和信源数确定的情况下,存在估计标准差最小的子阵;与不存在互耦的理想情况相比,除了估计标准差少许增加外,性能接近。本文的方法已应用于高分辨率测深侧扫声呐,获得了好结果。在声呐阵阵元数增加的条件下,用本文的方法,能抑制均匀线阵的互耦的影响。     

ZnO/A1lN/Si(111)薄膜的外延生长和性能研究

用常压金属化学气相沉积法(MOCVD)在Si(111)衬底上制备了马赛克结构ZnO单晶薄膜.引入低温AlN缓冲层以阻止衬底氧化、缓解热失配和晶格失配.薄膜双晶X射线衍射2θ/ω联动扫描只出现了Si(111)、ZnO(000l)及AlN(000l)的衍射峰.ZnO/AlN/Si(111)薄膜C方向晶格常量为0.5195 nm,表明在面方向处于张应力状态;其对称(0002)面和斜对称(1012)面的双晶X射线衍ω摇摆曲线半峰全宽分别为460"和1105";干涉显微镜观察其表面有微裂纹,裂纹密度为20 cm-1;3 μm×3μm范围的原子力显微镜均方根粗糙度为1.5 nm激光实时监测曲线表明薄膜为准二维生长,生长速率4.3μm/h.低温10 K光致发光光谱观察到了薄膜的自由激子、束缚激子发射及它们的声子伴线.所有结果表明,采用金属化学气相沉积法并引入AlN为缓冲层能有效提高Si(111)衬底上ZnO薄膜的质量.     

不同波长激发下YLiF_4∶Er~(3+),Tm~(3+),Yb~(3+)的发光

水热法合成了YL iF4∶Er3 ,Tm3 ,Yb3 ,其中Er3 、Yb3 和Tm3 的摩尔分数分别为1%、1.5%和2%。当用355 nm光激发时,其发光为蓝色,峰值位于450 nm,对应于Tm3 的1D2→3F4跃迁。用378 nm激发时,发光为绿色,主要发光峰位于552 nm。980 nm光激发时,发光为白色,发光峰分别位于665(651),552(543),484,450 nm处,并在648 nm处还观察到了一个发光峰,其中最强的发射为红光。YL iF4∶Er3 ,Tm3 ,Yb3 的蓝光来源于Tm3 的激发态1G4到基态3H6的跃迁,绿光来源于Er3 的4S3/2和2H11/2到基态4I15/2的跃迁,红光既来源于Tm3 的1G4→3F4的跃迁,也来源于Er3 的4F9/2→4I15/2的跃迁。在上转换发光中,还探测到了紫外光359 nm的发射。监测665 nm得到的激发光谱不同于监测552 nm的激发光谱,在665 nm的激发光谱中出现了对应Tm3 的1G4能级的峰。在双对数曲线中,蓝光484 nm、绿光552 nm和红光665 nm的斜率分别为2.25、2.28和2.21,紫外光359 nm的斜率为2.85。因此在980 nm激发下,蓝光484 nm、绿光552 nm和红光665 nm都是双光子过程,紫外光359 nm的发射是三光子过程。     

KBA显微镜成像系统的成像模拟及X光成像实验的研究

KBA显微镜是一种非轴对称、非共轴的掠入射成像系统。其结构复杂,调节精度要求很高,在实际成像实验操作中难以掌握其成像特性。利用光学设计软件模拟其成像,对系统的调节和成像分析提供有益的参考。利用光学设计软件ZEMAX模拟了KBA显微镜对点源的成像过程,给出了KBA显微镜成像系统的焦深约为1 mm,景深为50 mm左右。并且由模拟可知,掠入射角对成像的影响很大。对像素尺寸约10μm的探测设备,模拟得出KBA成像系统的空间分辨力上限为3μm左右。基于星光Ⅱ装置对周期为20μm的网格靶成像,获得了KBA显微镜较为清晰的X光图像。该项工作为进一步开展掠入射成像系统的研究奠定了基础。     

An Efficient Numerical Model for Planar Spiral Inductor On-Chip

In this paper, a very useful numerical technique has been developed for analyzing the transient characteristics of a planar-spiral inductor on-chip. A locally conformal technique and an alternating-direction implicit scheme are applied to the finite-difference time-domain method. A formulation for solving three dimensional Maxwell’s equations is proposed. Using the proposed method, various parameters of the planar-spiral inductors have been analyzed and an equivalent circuit, which includes frequency-independent circuit elements, has been introduced. Highly computational efficiency is implemented. Numerical results show excellent agreement with the measured data over a wide frequency range.     

基于双核模型对超重元素合成机制的研究

在双核模型基础上，考虑了熔合与准裂变的竞争，通过数值法求解主方程，计算了⁵⁰Ti，⁵⁸Fe+²⁰⁸Pb，²⁰⁹Bi这4个反应系统通过冷熔合反应合成超重元素的激发函数，得到了与实验比较符合的结果.计算了不同入射能量时各角动量分波对熔合概率和超重核存活概率的影响以及对蒸发剩余截面的贡献.这些结果对进一步理解超重核的合成机制有重要意义. 关键词： 超重元素 双核模型 熔合反应 蒸发剩余截面     

Propagation of elliptical Gaussian beam passing through apertured paraxial optical systems

The propagation of elliptical Gaussian beam passing through paraxial optical systems with aperture is investigated analytically by using tensor method. The approximate formula for propagation of elliptical Gaussian beam through hard apertured optical systems is derived based on the fact that the circ function can be expanded into a finite sum of complex Gaussian functions. The derived formula provides a convenient tool for treating the propagation and transformation of elliptical Gaussian beam through apertured optical systems. As an application example, the propagation properties of elliptical Gaussian beam through apertured fractional Fourier systems are discussed.     

Image segmentation based on hierarchical belief propagation with variable weighting parameters

The belief propagation (BP) algorithm is an efficient way to minimize the MRF energy for image segmentation. This paper proposes a hierarchical BP algorithm with variable weighting parameters (HBP-VW) to improve the segmentation accuracy of the BP-based algorithms. In the HBP-VW, two variable weighting parameters are introduced, the global parameter and the local parameter. The global parameter is used to overall adjust the influence of each part in the message update rule. The local parameter is designed to describe the local texture pattern for each site. Texture, remote sensing, and nature images are employed to test the proposed algorithm. Experimental results illustrate a better segmentation accuracy compared with other BP-based algorithms.     

Roles of γ-Fe2O3 in fly ash for mercury removal: Results of density functional theory study

First-principle calculations based on density function theory (DFT) are used to clarify the roles of γ-Fe₂O₃ in fly ash for removing mercury from coal-fired flue gases. In this study, the structure of key surface of γ-Fe₂O₃ is modeled and spin-polarized periodic boundary conditions with the partial relaxation of atom positions are employed. Binding energies of Hg on γ-Fe₂O₃ (0 0 1) perfect and defective surfaces are calculated for different adsorption sites and the potential adsorption sites are predicted. Additionally, electronic structure is examined to better understand the binding mechanism. It is found that mercury is preferably adsorbed on the bridge site of γ-Fe₂O₃ (0 0 1) perfect surface, with binding energy of −54.3 kJ/mol. The much stronger binding occurs at oxygen vacancy surface with binding energy of −134.6 kJ/mol. The calculations also show that the formation of hybridized orbital between Hg and Fe atom of γ-Fe₂O₃ (0 0 1) is responsible for the relatively strong interaction of mercury with the solid surface, which suggests that the presently described processes are all noncatalytic in nature. However, this is a reflection more of mercury's amalgamation ability.