黑腔靶中超热电子特性研究

近几年来,在“神光”装置上进行了1.053μm激光与平面靶及一系列柱形黑腔靶相互作用实验。用一台多道滤波—荧光X光能谱仪(FFS)测得各种靶发射的超热X射线谱,由谱推导超热电子温度T_h和超热电子总能量E_h当照射靶单束激光能量E_(tar)为400～670J、脉宽τ=650～1150ps时,发现黑腔内明显存在两群服从Maxwell分布高能电子(T_h=35～45keV;T_(hh)=150～350kev),而且E_(he)占E_(tar)的份额为10％～12％。实验还表明:腔内的E_(he)与非线性过程特征量(SRS)有较好的线性关系,因此推断出腔内超热电子产生的主要机制是受激Raman散射。在相同照射条件下,黑腔靶产生的超热电子比平面靶严重。     

Analysis of Asymmetric Long-Range Surface-Plasmon Waveguide with High-Confinement Mode

We model and study the asymmetric long-range surface-plasmon waveguides using the finite-element method. We introduce two types of asymmetric structures and discuss their modal properties compared to traditional long-range surface-plasmon waveguides. Although the propagation distance is decreased, the energy-confinement capability is improved for asymmetric long-range waveguiding structures when the geometrical parameters are properly selected. Our simulation result offers guidance for tuning properties of plasmonic waveguides and providing ways for enhancing electromagnetic energy confinement in long-range surface-plasmon waveguides.     

掺CdSxSe1-x玻璃波导分布反馈光学双稳器件

本文给出了掺CdS_xSe_1-x玻璃平面波导分布反馈(DFB)光学双稳器件的设计和制备方法,实现了低功耗、快速的本征光学双稳。     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.     

Estimation of luminescence lifetime in frequency domain

Absorption is the origin of luminescence. But it must be noticed that the lifetime of luminescence might reversely influence the rate of absorption. In this paper, it is reported that the luminescence intensity of copper and manganese changes with the driving frequency at constant voltage.The variation of luminescent intensity depends only on the lifetime of luminescence but not on the type of quenching or other factors. Generally the rate of absorption is dominantly determined by the material property and the lifetime of luminescence centres, the absorption of shorter lifetime centre will be larger than that of the longer lifetime centre at the same excited condition.     

Time-resolved measurement of atomic emission enhancement by fs--ns dual-pulsed laser-induced breakdown spectroscopy

Time-resolved measurement of atomic emission enhancement is performed by using a 500-fs KrF laser pulse incident upon a high density supersonic O_{2} gas jet, synchronized with an orthogonal ns frequency-doubled Nd:YAG laser pulse. The ultra-short pulse serves as an igniter of the gas jet, and the subsequent ns-laser pulse significantly enhances the atomic emission. Analysis shows that the contributions to the enhancement effect are made mainly by the bremsstrahlung radiation and cascade ionization.     

菌紫质薄膜光致折射率变化的理论计算和实验测量

基因改性细菌视紫红质BR-D96N由于M态寿命的延长而具有显著的光致变色特性.根据Kramers-Kronig变换关系,样品吸收光谱的变化会引起样品折射率的变化.本文首先从实验上测量了BR-D96N薄膜样品在光激发前后的吸收光谱,然后根据Kramers-Kronig变换关系,理论计算了对应此光致变色光谱变化的光致折射率变化光谱.实验上为了直接测量样品的光致折射率变化,采用Michelson干涉方法测量BR-D96N薄膜在不同探测波长下的光致折射率变化量,并与理论计算曲线进行了比较.     

Hydrogen dissociation on high-temperature tungsten

H₂ dissociation on polycrystalline tungsten is measured from 1700 to 3000 K using the filament temperature (T) change and a normalized H-atom density at the chamber surface. The dissociation probability per H₂ filament collision (P_diss) saturates at 0.40 at high T and has a 2.25 ± 0.05 eV apparent activation energy when P_diss ? 1. This activation energy is consistent with prior data and models, but the H₂ pressure dependence is not. P_diss is independent of the H₂ pressure for this entire T range and the 1-85 mTorr pressure range studied, contradicting the primary model that has been used to explain H₂ dissociation on tungsten and other metals. We show that some apparently contradictory prior measurements are actually consistent with our observations and with each other, once this pressure dependence of P_diss is recognized.