Mid-infrared supercontinuum generation in a four-hole As2S5 chalcogenide microstructured optical fiber

We demonstrate the supercontinuum (SC) generation in a four-hole As₂S₅ chalcogenide microstructured optical fiber (MOF) experimentally. The As₂S₅ glass has better property of transmission than As₂S₃ glass in the visible range. The four-hole As₂S₅ MOF is fabricated by a rod-in-tube method. The SCs generated by different pump wavelengths at 2,000, 2,300 and 2,500 nm in the MOF whose length is from 2.3 to 20 cm are demonstrated. Those pump wavelengths correspond to the chromatic dispersion wavelength in the normal chromatic dispersion region, the anomalous chromatic dispersion region close to zero-dispersion wavelength (ZDW) and the anomalous chromatic dispersion region far from ZDW, respectively. Wider SCs can be obtained when pumped at a wavelength in the anomalous dispersion region close to ZDW. The widest SC range of 4,280 nm (from 1,370 to 5,650 nm) covering two octaves was obtained in a 4.8-cm-long fiber pumped at 2,300 nm.     

共面不对称条件下Ar原子(e,2e)反应的三重微分截面

采用修正的扭曲波玻恩近似(DWBA)方法,计算了共面、大能量损失和小动量转移这一特殊几何条件下电子碰撞Ar(3p6)(e,2e)反应的三重微分截面.理论方法对(e,2e)反应过程近程极化势进行了修正,并引入Gamow因子表示后碰撞相互作用(PCI).将计算结果与实验结果、标准DWBA计算结果及Gamow因子修正后的DWBA-G计算结果进行了比较,发现极化效应起着重要的作用.     

Double-Alekseev inverse scattering method in the stationary axi-symmetric vacuum gravitation field equations

We present a new improvement to the Alekseev inverse scattering method. This improved inverse scattering method is extended to a double form, followed by the generation of some new solutions of the double-complex Kinnersley equations. As the double-complex function method contains the Kramer-Neugebauer substitution and analytic continuation, a pair of real gravitation soliton solutions of the Einstein’s field equations can be obtained from a double N-soliton solution. In the case of the flat Minkowski space background solution, the general formulas of the new solutions are presented.      

X-ray spectra induced by slow highly charged Ar q + ions in collision with Nb surface

The X-ray spectra of Nb surface induced by Ar ^q+ (q = 16,17) ions with the energy range from 10 to 20 keV/q were studied by the optical spectrum technology. The experimental results indicate that the multi-electron excitation occurred as a highly charged Ar¹⁶⁺ ion was neutralized below the metal surface. The K shell electron of Ar¹⁶⁺ was excited and then de-excited cascadly to emit K X-ray. The intensity of the X-ray emitted from K shell of the hollow Ar atom decreased with the increase of projectile kinetic energy. The intensity of the X-ray emitted from L shell of the target atom Nb increased with the increase of projectile kinetic energy. The X-ray yield of Ar¹⁷⁺ is three magnitude orders larger than that of Ar¹⁶⁺. Supported by the National Natural Science Foundation of China (Grant Nos.10774149 and 10405025)     

Preparation and Thermal Properties of Boron-Containing o-Cresol-Formaldehyde Resin/Octa(aminophenyl)-POSS Nanocomposites

The boron-containing o-cresol-formaldehyde resin (BoCFR) and octa(aminophenyl) polyhedral oligomeric silsesquioxane (OAP-POSS) were synthesized, and the BoCFR/OAP-POSS nanocomposite prepared via an in-situ method. The curing process of the resin was characterized by Fourier transform infrared (FTIR). The thermal properties and dynamic mechanical properties of the nanocomposites were investigated. The results show that the maximal mechanical loss temperature (T_p) increased with increasing OAP-POSS content. When the content of OAP-POSS was 10 wt% the T_p was over 200°C, 27°C higher than the pure BoCFR. The BoCFR/OAP-POSS nanocomposite had better thermal stablitity than the pure BoCFR. The residual weight of the o-cresol-formaldehyde resin was only 6.13 wt% at 600°C. But the residual weight of the pure BoCFR was 55.73 wt% at 600°C, and the residual weights of the BoCFR nanocomposites were all higher than pure BoCFR. The residual weight of the BoCFR nanocomposite was 63.2 wt% at 600°C and 21.83 wt% at 900°C when the OAP-POSS content was 10 wt%. The weight loss of BoCFR/OAP-POSS nanocomposite can be divided primarily into two temperature stages, from 430°C to 550°C and from 550°C to 900°C. The main thermal degradation reaction follows first order kinetics.     

Experiments and analyses of a new type optical system for computed radiography

A new high-performance laser scanning system is designed. In this system, a scanning arm consisting of a pentagonal prism and a scanning object lens is used to replace the traditional Fθ lens, and a circular imaging plate transmission mechanism is specially designed in order to meet the requirement of the scanning arm. At the same time, the stimulation fluorescence can be obtained by the scanning arm. Some main factors that influence the spatial resolution and the performance of the laser scanner system are analyzed, and the analysis results are presented, which is helpful for further optimization design of the system. Experimental results indicate that the images obtained by the system have good visual effects and can meet the requirements of industrial inspection.     

Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes

We report the achievement of transport critical currents in Sr_0.6K_0.4Fe₂As₂ wires and tapes with a T_c = 34 K. The wires and tapes were fabricated through an in situ powder-in-tube process. Silver was used as a chemical addition as well as a sheath material. All the wire and tape samples have shown the ability to transport superconducting current. Critical current density J_c was enhanced upon silver addition, and at 4.2 K, a largest J_c of ～1200 A/cm² (I_c = 9 A) was achieved for 20% silver added tapes, which is the highest in iron-based wires and tapes so far. The J_c is almost field independent between 1 T and 10 T, exhibiting a strong vortex pinning. Such a high transport critical current density is attributed to the weak reaction between the silver sheath and the superconducting core, as well as an improved connectivity between grains. We also identify a weak-link behavior from the apparent drop of J_c at low fields and a hysteretic phenomenon. Finally, we found that compared to Fe, Ta and Nb tubes, Ag was the best sheath material for the fabrication of high-performance 122 type pnictide wires and tapes.     

Topological Structure of Entropy of 4-Dimensional Axisymmetric Black Holes

Using the relationship between the entropy and the Euler characteristic, an entropy density is introduced to describe the inner topological structure of the entropy of 4-dimensional axisymmetric black holes. It is pointed out that the density of entropy is determined by the singularities of the timelike Killing vector field of spacetime, and these singularities carry the topological numbers, Hopf indices and Brouwer degrees, which are topological invariants. At last, Kerr–Newman black hole as an example of axisymmetric black holes is given. What’s more, the entropy and the latent heat of the topological phase transition of the black hole mentioned above are calculated and the latent heat just lies in the range of the energy of gamma ray bursts. This work is supported in part by the NSFs of China under Grant No. 10575068 and of Shanghai Municipal Committee of Science and Technology under Grant No. 04ZR14059 and Shanghai Leading Academic Discipline Project under Project Number: T0104.     

<Emphasis Type="Italic">In situ</Emphasis> X-ray diffraction study of structural evaluation in Fe<Subscript>73</Subscript>Cu<Subscript>1.5</Subscript>Nd<Subscript>3</Subscript>Si<Subscript>13.5</Subscript>B<Subscript>9</Subscript> amorphous alloy at high temperature

The thermodynamics structural relaxation of Fe₇₃Cu_1.5Nd₃Si_13.5B₉ amorphous alloy from room temperature to 400°C has been investigated by measuring the structure factor with in situ X-ray diffraction. The structural information of the atomic configuration such as radial distribution function (RDF) and neighbor atomic distance was gained by Fourier transformation. The research result shows that the amorphous structure remains stable in the temperature range of 30 to 400°C but exhibits distinct changes in local atomic configuration with the increase of temperature. The quantitative determination of the neighbor atomic distance suggests that the degree of short-range order changes by the temperature altering the second nearest neighbor local atomic configuration of the amorphous when structural relaxation occurs. Supported by the Natural Science Foundation of Hebei Province of China (Grant No. A2007000296), the National Natural Science Foundation of China (Grant No. 50731005), SKPBRC (Grant Nos. 2007CB616915 and 2006CB605201), and PCSIRT (Grant No. IRT0650)     

层状钙钛矿La1.3Sr1.7Mn2-xCuxO7的磁性及电特性

通过固相反应烧结法成功制备了层状钙钛矿La1.3Sr1.7Mn2-xCuxO7多晶,主要研究了其磁电特性.结果表明,样品为Sr3Ti2O7型钙钛矿结构.随着温度的降低,其磁性经历了一个很复杂的转变过程.当x=0时,在T*=231 K出现二维短程铁磁有序,在Tc=114 K出现三维长程铁磁有序,在TN=56 K出现倾斜的反铁磁转变.当x=0.05时,Cu替代使得T*,Tc和TN减小.其电特性表明,La1.3Sr1.7Mn2-xCuxO7多晶呈现出双峰现象,这是由于钙钛矿结构锰氧化物共生现象造成的.虽然5%Cu替代,降低了金属一绝缘体转变温度,但是却增强了磁电阻效应.