Rapid screening method for the determination of diethylstilbestrol in edible animal tissue by column liquid chromatography with electrochemical detection

A rapid and sensitive screening method for the determination of residues of diethylstilbestrol in edible animal tissue is described. The analyte was extracted from the tissue with tert.-butyl methyl ether, reextracted with 1 M sodium hydroxide and further cleaned up by solid-phase extraction with C18 cartridges. Analysis was performed by isocratic elution with a phosphate-buffered mobile phase, methanol-0.05 M phosphate buffer pH 3.5 (67:33), on a Nucleosil 5-microns C18 column with electrochemical detection at +0.90 V. The average recovery of trans-diethylstilbestrol in spiked samples is 66%, with a standard deviation of 14% (n = 22) in the range 0.5-2.0 microgram/kg. The detection limit is 0.1-0.2 microgram/kg, although at this level other compounds may interfere and give rise to false positive results.     

Method of immobilization of carboxymethyl-dextran affects resistance to tissue and cell colonization

Coatings from carboxymethylated dextrans (CMDs) were fabricated, analyzed by XPS, and investigated for their ability to inhibit corneal epithelial tissue outgrowth and bovine corneal epithelial cell attachment and growth. CMDs with differing degrees of carboxymethyl substitution and various molecular weights were synthesized by the solution reaction of dextrans with bromoacetic acid under different reactant ratios. The CMD compounds thus obtained were attached onto aminated surfaces produced in two ways: by the plasma deposition of a coating from n-heptylamine vapour, and by the plasma deposition of an acetaldehyde coating onto whose surface aldehyde groups the polyamine compounds polylysine, polyethyleneimine and polyallylamine were immobilized to provide platforms for CMD immobilization. XPS spectra showed that the latter route produced thicker coatings than the former approach. CMD molecules attached directly onto the plasma-fabricated amine surface supported some tissue migration; the extent of carboxymethyl substitution and the molecular weight of the CMDs had little influence. For CMDs immobilized via polyamine spacers, on the other hand, tissue outgrowth was completely inhibited, and again there were no discernible effects from the extent of carboxymethyl substitution and the molecular weight of the CMDs. In assays involving cell attachment and growth, analogous observations were found. Thus, the mode of immobilization of these polysaccharide coatings is the dominant factor in their anti-fouling performance, suggesting that optimization of the architecture of polysaccharide coatings may be an important factor for maximizing their cell-repellent abilities.     

Surface tension of quantum fluids from molecular simulations

We present the first molecular simulations of the vapor-liquid surface tension of quantum liquids. The path integral formalism of Feynman was used to account for the quantum mechanical behavior of both the liquid and the vapor. A replica-data parallel algorithm was implemented to achieve good parallel performance of the simulation code on at least 32 processors. We have computed the surface tension and the vapor-liquid phase diagram of pure hydrogen over the temperature range 18-30 K and pure deuterium from 19 to 34 K. The simulation results for surface tension and vapor-liquid orthobaric densities are in very good agreement with experimental data. We have computed the interfacial properties of hydrogen-deuterium mixtures over the entire concentration range at 20.4 and 24 K. The calculated equilibrium compositions of the mixtures are in excellent agreement with experimental data. The computed mixture surface tension shows negative deviations from ideal solution behavior, in agreement with experimental data and predictions from Prigogine's theory. The magnitude of the deviations at 20.4 K are substantially larger from simulations and from theory than from experiments. We conclude that the experimentally measured mixture surface tension values are systematically too high. Analysis of the concentration profiles in the interfacial region shows that the nonideal behavior can be described entirely by segregation of H(2) to the interface, indicating that H(2) acts as a surfactant in H(2)-D(2) mixtures.     

A comparison of SCF-Xα and extended Hückel methods for metal clusters

A comparison of some results from Xα-scattered wave (Xα-SW) and extended Hückel (EH) calculations for metal clusters is given. It is found that small clusters of atoms (≈ 13 atoms) using the Xα-SW method reproduce many of the features of the electronic structure of the bulk metals, whereas this is not the case for the same clusters using the EH method. A more systematic approach to EH parametrizations is suggested in order to make this method a more viable approach to treating metal clusters.     

Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.     

A family of alkynylgold(III) complexes [AuI(mu-{CH2}2PPh2)2Au(III)(C triple bond CR)2] (R = Ph, tBu, Me3Si): facile and reversible comproportionation of gold(I)/gold(III) to digold(II)

The symmetric digold(II)dichloride bis(ylide) complex [Au2Cl2(mu-{CH2}2PPh2)2] reacts with acetylides to form the asymmetric heterovalent gold(I)/gold(III) complexes [AuI(mu-{CH2}2PPh2)2AuIII(CCR)2] [R = Ph, tBu, and SiMe3], the phenyl analogue of which was characterized by X-ray crystallography. These compounds represent the first examples of gold(III) complexes containing two acetylide ligands. [AuI(mu-{CH2}2PPh2)2AuIII(CCPh)2] undergoes a reversible comproportionation reaction upon treatment with [Ag(ClO4)tht] to give the symmetric digold(II) cationic complex [Au2(tht)2(mu-{CH2}2PPh2)2](ClO4)2. If this complex is treated with phenylacetylene in the presence of base, the heterovalent gold(I)/gold(III) complex is re-formed. This reversible interconversion between binuclear gold(I)/gold(III) and digold(II) bis(ylide) complexes is unprecedented.     

Identification of the main by-products of the developing agent N-hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine in photographic effluents by liquid chromatography/mass spectrometry

N-Hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine (CD(4)) is commonly used as a developing agent in color photographic processes. The main by-products formed in developer baths used in the process were separated and identified by liquid chromatography/electron ionization mass spectrometry (LC/EI-MS) and liquid chromatography/atmospheric pressure ionization mass spectrometry (LC/API-MS). A number of side reactions, in addition to the main reactions involved in the developing process, were found to occur. Such side reactions involved in the formation of CD(4) by-products included oxidation, hydroxylation, sulfonation and the formation of coupling products. A reaction pathway for the degradation of CD(4) based on the nature of the by-products identified is proposed and discussed.     

A new protecting group for the exocyclic amino groups of nucleosides

A new protecting group has been developed for the exocyclic amino groups of nucleosides that occur in DNA. 3-Phenyl-[{N-(2-trimethylsilyl-ethoxycarbonyl)-2-amino}]-propanoic acid used as the protective agent.     

A post-Hartree-Fock model of intermolecular interactions

Intermolecular interactions are of great importance in chemistry but are difficult to model accurately with computational methods. In particular, Hartree-Fock and standard density-functional approximations do not include the physics necessary to properly describe dispersion. These methods are sometimes corrected to account for dispersion by adding a pairwise C6R6 term, with C6 dispersion coefficients dependent on the atoms involved. We present a post-Hartree-Fock model in which C6 coefficients are generated by the instantaneous dipole moment of the exchange hole. This model relies on occupied orbitals only, and involves only one, universal, empirical parameter to limit the dispersion energy at small interatomic separations. The model is extensively tested on isotropic C6 coefficients of 178 intermolecular pairs. It is also applied to the calculation of the geometries and binding energies of 20 intermolecular complexes involving dispersion, dipole-induced dipole, dipole-dipole, and hydrogen-bonding interactions, with remarkably good results.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.