Cloning,Expression, Purification,and Characterization of β-Galactosidase from Bifidobacterium longum and Bifidobacterium pseudocatenulatum

Expression and purification of β-galactosidases derived from Bifidobacterium provide a new resource for efficient lactose hydrolysis and lactose intolerance alleviation. Here, we cloned and expressed two β-galactosidases derived from Bifidobacterium. The optimal pH for BLGLB1 was 5.5, and the optimal temperature was 45 °C, at which the enzyme activity of BLGLB1 was higher than that of commercial enzyme E (300 ± 3.6 U/mg) under its optimal conditions, reaching 2200 ± 15 U/mg. The optimal pH and temperature for BPGLB1 were 6.0 and 45 °C, respectively, and the enzyme activity (0.58 ± 0.03 U/mg) under optimum conditions was significantly lower than that of BLGLB1. The structures of the two β-galactosidase were similar, with all known key sites conserved. When o-nitrophenyl-β-D-galactoside (oNPG) was used as an enzyme reaction substrate, the maximum reaction velocity (V_max) for BLGLB1 and BPGLB1 was 3700 ± 100 U/mg and 1.1 ± 0.1 U/mg, respectively. The kinetic constant (K_m) of BLGLB1 and BPGLB1 was 1.9 ± 0.1 and 1.3 ± 0.3 mmol/L, respectively. The respective catalytic constant (k_cat) of BLGLB1 and BPGLB1 was 1700 ± 40 s⁻¹ and 0.5 ± 0.02 s⁻¹, respectively; the respective k_cat/K_m value of BLGLB1 and BPGLB1 was 870 L/(mmol∙s) and 0.36 L/(mmol∙s), respectively. The K_m, k_cat and V_max values of BLGLB1 were superior to those of earlier reported β-galactosidase derived from Bifidobacterium. Overall, BLGLB1 has potential application in the food industry.     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

Rapid determination of 90Sr in urine samples using AnaLig® Sr-01

This paper describes the use of IBC’s AnaLig^® Sr-01 molecular recognition technology product to effectively and selectively pre-concentrate, separate, and recover strontium from urine samples. This method uses two-stage columns separation consisting of two different commercial products Eichrom’s Pre-filter Material and AnaLig^® Sr-01 column from IBC Advanced Technologies. This method does not involve co-precipitation of strontium as phosphates and oxalates from urine samples. The new rapid method separates strontium-90 with high chemical recovery.     

Anionic surfactant selective electrode for the titrimetric determination of anionic surfactant

The construction and characteristic performance of a PVC membrane electrode responsive for sodium dodecylsulfate (SDS) are described in this paper. The electrode based on CTA⁺DS^? ion pair as ionophore in PVC membrane displays a Nernstian slope of ?58.8 ± 0.7 mV/decade in a 1.32 × 10^?6 to 3.75 × 10^?3 mol L^?1 concentration range and a limit of detection of 1.13 × 10^?6 mol L^?1. The electrode can be used for 3 months without showing significant changes in the value of slope or working range. The electrode has been utilized as an end point indicator electrode for potentiometric titration involving Hyamine as titrant. More than 100 titrations were carried out for the evaluation of the electrode parameters: the standard deviations of the equivalent volume and the equivalent potential, the height of the potential jump and the number of faulty titrations. The behavior of the electrode was assessed with regard to their usefulness in routine analysis.     

Synthesis of 5-Thio-D- Galactopyranose

5-Thio-D-galactopyranose has been synthesized from diacetone galactofuranose in nine steps and 13.4% overall yield. The key step involved a successful conversion of furanosyl 5,6-epoxide with an L-altrose configuration into the corresponding 5,6-thiirane D-galactose derivative, which was hydrolyzed to the target compound.     

The Regio- and Stereoselective Synthesis of Rhamnose-Containing Oligosaccharides Via Sugar-Sugar Orthoester Formation and Rearrangement

ABSTRACT

Convenient regio- and stereoselective syntheses of rhamnose-containing oligosaccharides via sugar-sugar orthoester formation and rearrangement are described. 1→3 Linked rhamno di- and trisaccharides were synthesized effectively using unprotected rhamnose residue as the glycosyl acceptor by this methodology.     

Immobilized palladium on surface-modified Fe3O4/SiO2 nanoparticles: as a magnetically separable and stable recyclable high-performance catalyst for Suzuki and Heck cross-coupling reactions

A palladium-based catalyst (Fe₃O₄/SiO₂/HPG–OPPh₂–PNP) supported on chlorodiphenylphosphine-functionalized magnetic nanoparticles was successfully prepared from Fe₃O₄/SiO₂ with sequential attachment of glycerol and chlorodiphenylphosphine, followed by treatment of an ethanolic solution of palladium chloride with hydrazine. The as-prepared catalyst was characterized by ICP-AES, FTIR, XRD, SEM, and TEM. The Fe₃O₄/SiO₂/HPG–OPPh₂–PNP was found as a magnetically separable and highly active catalyst for Suzuki coupling reactions of aryl iodides, bromides, and chlorides as well as Heck reactions of aryl iodides and bromides. Under appropriate conditions, all reactions afforded the desired products in moderate to excellent yields. Moreover, this catalyst can be easily recovered by using a magnetic field and directly reused for at least six cycles without significant loss of its activity.     

A Germanate Compound Constructed from Dissymmetric Ge7 Chains and Metal Complexes

Abstract. A novel germanate compound, |[Ni(dien)₂]₃(H₂O)₃|[Ge₇O₁₃F₅]₂(designated JU‐85, dien = diethylenetriamine), was solvothermally synthesized. The structure of JU‐85 was determined by single‐crystal X‐ray diffraction and further characterized by powder X‐ray diffraction, inductively coupled plasma, infrared spectroscopy, elemental analysis, and thermogravimetric analysis. JU‐85 has dissymmetric chains constructed from diagonally linked Ge₇ building units and various Ni(dien)₂²⁺ complexes formed in situ during the synthesis. Compared with its structural analogue, FJ‐6, JU‐85 contains less complex cations and different host‐guest assembly. Besides the diagonal linkage in JU‐85, other dissymmetric linkages of Ge₇ building units were enumerated, which could be used as the stereogenic centers for the design of novel chiral germanate compounds.