Sargassum fusiforme Polysaccharide-Based Hydrogel Microspheres Enhance Crystal Violet Dye Adsorption Properties

In this study, a polysaccharide-based hydrogel microsphere (SFP/SA) was prepared using S. fusiforme polysaccharide (SFP) and sodium alginate (SA). Fourier transform infrared spectroscopy (FT-IR) demonstrated that SFP was effectively loaded onto the hydrogel microsphere. Texture profile analysis (TPA) and differential scanning calorimetry (DSC) showed that, with the increase of SFP concentration, the hardness of SFP/SA decreased, while the springiness and cohesiveness of SFP/SA increased, and the thermal stability of SFP/SA improved. The equilibrium adsorption capacity of SFP/SA increased from 8.20 mg/g (without SFP) to 67.95 mg/g (SFP accounted 80%) without swelling, and from 35.05 mg/g (without SFP) to 81.98 mg/g (SFP accounted 80%) after 24 h swelling. The adsorption of crystal violet (CV) dye by SFP/SA followed pseudo-first order and pseudo-second order kinetics (both with R² > 0.99). The diffusion of intraparticle in CV dye was not the only influencing factor. Moreover, the adsorption of CV dye for SFP/SA (SFP accounted 60%) fit the Langmuir and Temkin isotherm models. SFP/SA exhibited good regenerative adsorption capacity. Its adsorption rate remained at > 97% at the 10th consecutive cycle while SFP accounted for 80%. The results showed that the addition of Sargassum fusiforme polysaccharide could increase the springiness, cohesiveness and thermal stability of the hydrogel microsphere, as well as improve the adsorption capacity of crystal violet dye.     

Cavity phase matching via an optical parametric oscillator consisting of a dielectric nonlinear crystal sheet

We experimentally demonstrate cavity phase matching for the first time using a sheet optical parametric oscillator which is made of an x-cut KTiOPO(4) crystal sheet. This microcavity presents 220 kW peak power capability for near-frequency-degenerate parametric outputs with up to 23.8% slope efficiency. It also features unique spectral characteristics such as single-longitudinal-mode and narrow linewidth. These attractive properties predict broad applications of such a mini-device, such as terahertz generation, photonic integration, spectroscopy, and quantum information, etc.     

Rapid thermal annealing effects on the structural and optical properties of Na–N codoped ZnO films

Polycrystalline ZnO thin films codoped with Na and N were obtained by chemical bath deposition. The structural characteristic and the optical properties of the rapid thermal annealed ZnO:(Na,N) films were investigated by X-ray diffraction, scanning electron microscopy, energy dispersive spectrometer (EDS), Raman spectrum and room-temperature photoluminescence. After RTA treatment, the XRD spectra showed a continuous decrease of the full- width at half-maximum (FWHM) of the (0 0 2) diffraction peak of the ZnO:(Na,N) film. The Raman spectra revealed that the intensity of the mode around 582 cm⁻¹ increased with the increase of the RTA temperature. The PL spectra showed different trends in the UV luminescence of ZnO:(Na,N) films after RTA treatments.     

水波聚焦的研究

利用水波槽装置观察到了水波聚焦现象,并利用流体力学中的表面波理论,借用光学中对折射率的定义,推出了与光线通过薄透镜聚焦完全对应的水波聚焦理论公式,以及焦距随水深变化的关系曲线,从而将水波的几何特性与光波的几何特性统一起来。     

Adsorption of L-Alanine on Cu（111） Studied by Scanning Tunnelling Microscopy

The adsorption of L-alanine on Cu（111） surface is studied by means of scanning tunnelling microscopy under ultra-high vacuum conditions. The results show that the adsorbates are chemisorbed on the surface, and can form a two-dimensional gas phase, chain phase and solid phase, depending on deposition rate and amount. The adsorbed molecules can be imaged as individual protrusions and parallel chains in gas and chain phases respectively. It is also found that alanine can form （2 × 2） superstructure on Cu（111） and copper step facet to （110） directions in solid phase. On the basis of our scanning tunnelling microscopic images, a model is proposed for the Cu（111）（2 ×2）-alanine superstructure. In the model, we point out the close link between （110）-direction hydrogen bond chains with the same direction copper step faceting.     

基于RFID及3G网络的物流跟踪系统研究

为实现物流货物自动跟踪,通过RFID电子标签自动记录货物的收货、入库、卸货、送货全过程,在运输途中,通过传感器实时采集运输环境参数并通过3G上传到服务器,在地图上实现货物位置、运输环境、货物名称的精确对比,运输环境不合适时及时报警;详细介绍了系统的整体设计,并对系统的软硬件设计进行了分析,测试结果表明,系统整体稳定,环境测量误差率低,能够实现物流货物的全程跟踪,该系统可广泛应用于物流业。     

The 1/f noise in multiwalled carbon nanotubes

The $1/f$ noise in multiwalled carbon nanotubes bundles has been investigated between the frequency range of 0.1 to 30 Hz. At room temperature the noise spectrum is standard 1/f, and its level is proportional to the square of the bias voltage. With decreasing temperature the noise level also decreases. At 4.2 K the noise level follows a non-monotonic dependence against the bias voltage, showing a peak at a certain bias voltage, meanwhile its frequency dependence also deviates from the 1/f trend. This anomalous behaviour is discussed within the picture of environmental quantum fluctuation of charge transport in the samples.     

Giant magnetocurrent in triple-barrier ferromagnetic resonant-tunneling diode with different magnetization configurations

The authors theoretically investigate a triple-barrier ferromagnetic resonant-tunneling diode composing nonmagnetic couple wells and three GaMnN magnetic barriers, in which two kinds of antiparallel configurations are formed by changing the relative orientation of magnetization in the barriers. Based on a two-band model, the achievement of large magnetocurrents in the resonant bias regime is proposed under an optimal magnetization configuration. The magnetocurrents in both antiparallel configurations of triple-barrier system are much higher than that in double-barrier structure.     

s-Parameterized phase space distribution for describing no counts registered on a photonic detector

By introducing the generalized Wigner operator for s-parameterized quasiprobability distribution and employing the technique of integration within ordered product (IWOP) of operators (normally ordered, Weyl ordered or antinormally ordered), we derive two new quantum-mechanical formulas for describing no counts registered on a photonic detector when a light field’s density operator ρ is known, one involves ρ’s s-parameterized distribution function, and the other involves ρ’s coherent state mean value, when these information is known then using the new formulas to calculate no-photocount would be convenient.