硅基超晶格Si1-xSnx/Si的能带结构

由于Si基发光材料能与现有的Si微电子工艺兼容,其应用前景被广泛看好. 设计具有直接带隙的Si基材料,备受实验和理论研究者的关注. 本文根据芯态效应、电负性差效应和对称性效应设计了Si基超晶格Si_1－xSn_x/Si. 其中Si_0.875Sn_0.125/Si为直接带隙材料. 在密度泛函框架内,采用平面波赝势法计算表明,Si_0.875Sn_{0.125相似文献}   

六种蜂花粉的红外光谱三级鉴别研究

采用傅里叶变换红外光谱(FTIR)结合二阶导数谱和热扰动下的二维相关红外光谱技术对6种不同花粉,即杏花花粉、油菜花粉、茶花花粉、西瓜花粉、荷花花粉和虞美人花粉,进行了快速无损的鉴别。结果表明,在一维红外光谱图上,不同花粉的蛋白质、脂肪和糖类物质的特征吸收峰在相对峰强和峰位上均存在一定的差异,在二阶导数谱上差异很明显。而在二维红外谱图上,由于6种花粉的自动峰及相关峰峰簇的位置和数量不同,其差别体现得更为明显和直观。因此,三级红外宏观指纹图谱法是鉴别不同蜂花粉种类的一种有效和快速检测方法。     

Relationship between positron bulk lifetime and lattice constants-research on NaCl-type crystals

The positron lifetimes of some compounds with NaCl-type crystal structure are calculated with the method of atomic superposition approximation (ATSUP) based on the theories of local-density-approximation (LDA) and generalgradient-approximation (GGA).The systematical results are fitted to a curve as a function of lattice constants.The positron bulk lifetimes of some other compounds with NaCl-type crystal structure,which are deduced from the systematical results,are in agreement with the experimental results given in other literature.     

Study of lower emittance dedicated synchrotron radiation mode for the BEPCⅡ

In this paper,a dedicated synchrotron radiation （SR） mode for the BEPCⅡ with an emittance of 85 nm has been designed,including the linear lattice,chromaticity correction and dynamic aperture optimization.The emittance of the new mode is about 60% of the previous mode used for routine operation of the BEPCⅡ .The effect of wigglers on the linear lattice was compensated and the total dynamic aperture including the wigglers’ nonlinear effect was estimated.The preliminary commissioning at the end of 2008 and the formal operation with the new mode confirmed its merits.     

脉冲激光频域干涉技术在超快动力学物理中的应用

介绍了一种具有fs时间分辨力的超短脉冲激光频域干涉测试技术,详细论述了该技术的工作原理和系统构成,指出传输时间差和相位差是影响频域干涉条纹周期的主要因素。采用脉冲激光频域干涉仪测量了200 nm厚度铝膜在波长800 nm、单脉冲能量0.7 mJ、脉宽35 fs脉冲激光作用下的运动速度剖面。在单次飞秒脉冲激光作用下,铝膜自由面的运动速度峰值可达960 m/s,速度剖面的上升前沿小于5.77 ps,表明脉冲激光频域干涉技术可用于测量材料在超快脉冲激光作用下的冲击动力学参数。     

WXG-4型旋光仪三分视场亮暗调节

针对WXG-4型旋光仪的均匀亮视场和均匀暗视场的亮度对比不明显问题进行了研究,分析了三分视场光强与起偏器透振方向的关系,得出原因是起偏器透振方向与半波片的光轴夹角太大.旋转起偏器,使其透振方向与半波片的光轴夹角减小并固定,均匀亮视场和均匀暗视场的亮度对比明显,使仪器恢复正常使用.     

Microstructure and dielectric properties of PMN–PT ceramics prepared by the molten salts method

The sintering characteristic and dielectric properties of 0.67PMN–0.33PT ceramics prepared by the molten salt synthesis (MSS) method were investigated. PMN–PT particles synthesized by MSS with smaller grain size and good dispersion could lower the sintering temperature of ceramics; PMN–PT ceramics with relative density above 96% could be obtained in the range 1150–1180 °C. The molten salts species could significantly affect the microstructure and properties of MPN-PT ceramics. In the range 1100–1200 °C, PMN–PT ceramics from the sulfate flux MSS powders showed intergranular fracture, but that from the chloride flux MSS powder showed transgranular fracture. At the same sintering condition, the properties of PMN–PT ceramics from the powders prepared in the chloride flux are better than that from the powders prepared in the sulfate flux, their maximum dielectric constant ε_max≈29,385 and piezoelectric constant d₃₃≈660 pC/N. The above results demonstrated that PMN–PT ceramics prepared by the molten salts method possessed excellent piezoelectric and dielectric properties.     

基于跳距修正L-M优化的WSN定位算法

针对DV-Hop定位算法在节点随机分布的网络拓扑环境下存在误差较大的问题,文中通过分析平均跳距估计、未知节点坐标估计区域求解对定位精度的影响,提出了一种基于跳距修正L-M优化的WSN定位算法CLDV-Hop(Correct L-M DV-Hop)。仿真结果表明,在不增加额外开销且仿真环境相同的条件下,CLDV-Hop算法比现有改进的算法具有更高的定位精度,与DV-Hop算法相比精度提高了约33%——41%。     

改进三帧差分算法在移动物体检测中的应用

移动物体监控系统利用检测算法识别监控区域的移动物体,并进行实时异常信息存储,检测算法中的传统三帧差分法中的阈值是固定的,因此重叠部分无法准确检测出来,存在空洞现象,可能发生误判。针对这些问题,对已有的三帧差分法进行改进,结合图像边缘提取和自适应的迭代阈值计算方法来提高移动物体检测的准确性,并对异常信息进行选择性存储,由实验结果可知,应用平台采用改进后的移动物体检测算法,较好的提高了移动物体检测的灵敏度,增强了检测系统的实时性和准确性,若仅存储异常信息,可节省视频存储空间,并在定位异常动态信息时节省查找时间。     

干涉型光纤水听器PGC解调的参数估计方法

对于干涉型光纤水听器外调制式相位生成载波(PGC)解调方案,光干涉强度和调制深度两个参数的波动会影响解调结果。为了消除影响,本文提出利用椭圆曲线拟合以及频域搜索的参数估计方法。根据理论分析,当调制深度在[0,3.83]区间内两种方法有效,可以适应实际情况中调制深度缓慢且小范围波动的情况。为了分析验证两种方法,本文利用不同类型的待测信号进行了数值仿真,根据仿真结果,在声信号引起的相位较大的情况下,两种方法都能对参数进行正确估计;利用频域搜索的方法适用的动态范围更大;当相关参数缓慢波动时,频域搜索法能正确跟踪估计相关参数。