Solid Amine Adsorbent Prepared by Molecular Imprinting and Its Carbon Dioxide Adsorption Properties

A carbon dioxide imprinted solid amine adsorbent (IPEIA‐R) with polyethylenimine (PEI) as a skeleton was conveniently prepared by using glutaraldehyde to cross‐link carbon dioxide‐preadsorbed PEI. As confirmed by FTIR, FT‐Raman, and ¹³C NMR spectroscopy, CO₂ preadsorbed on PEI could occupy the reactive sites of amino groups and act as a template for imprinting in the cross‐linking process. The imino groups formed from the cross‐linking reaction between glutaraldehyde and PEI could be reduced by NaBH₄ to form CO₂‐adsorbable amino groups. The adsorption results indicated that CO₂ imprinting and reduction of imino groups by NaBH₄ endowed the adsorbent with a higher CO₂ adsorption capacity. Compared with PEI‐supported mesoporous adsorbents, the solid amine adsorbent with PEI as a skeleton can avoid serious pore blockage and CO₂ diffusion resistance, even with a high amine content. The solid amine adsorbent with PEI as a skeleton showed a remarkable CO₂ adsorption capacity (8.56 mmol g^?1) in the presence of water at 25 °C, owing to the high amine content and good swelling properties. It also showed promising regeneration performance and could maintain almost the same CO₂ adsorption capacity after 15 adsorption–desorption cycles.     

Bi-2223/Ag异质结的光生电压效应研究

在50 ～ 340 K不同温度下,利用紫色激光(λ=405 nm)对银/铋锶钙铜氧2223异质结界面进行辐照,观测到明显的光生电压效应,发现光生电压的极性分别在超导转变温度TC与320 K附近发生了反转,排除了激光产生的热电势是产生光生电压的原因,分析表明银/铋锶钙铜氧2223异质结界面处存在内建电场:光生电压由异质结界面处的内建电场分离光生电子-空穴对产生的.超导转变温度TC之下以及320 K以上,内建电场方向从超导体指向金属电极;超导转变温度TC与反向温度320 K之间,内建电场从金属指向超导体.     

用光波导光模光谱技术研究DNA-DNA结合蛋白相互作用

探讨了应用光波导光模光谱(Optical waveguide lightmode spectroscopy,OWLS)技术研究DNA-DNA结合蛋白相互作用的可行性和灵敏性。以固定在传感器芯片表面的DNA探针为捕捉分子,溶液中同时含有探针结合序列和NF—κB结合位点序列的寡核苷酸与NF-κB亚单位p50同源二聚体形成的DNA-蛋白质复合物为检测分子,用光波导光模光谱检测技术建立非标记DNA-DNA结合蛋白相互作用检测研究体系。利用这一体系对不同样品中NF-κB p50浓度和具不同NF-κB结合位点序列的寡核苷酸与NF-κB p50亲合和力进行检测。样品中低至0．33 nmol/1的NF-κB p50被光波导光模光谱检测出,不同的NF-κB结合序列与NF-κB p50亲合力有显著的差异。研究发现,光波导光模光谱技术可以用于DNA-DNA结合蛋白相互作用研究,所建立的非标记检测研究体系可以进行样品中结合蛋白含量高灵敏检测和核酸序列与结合蛋白的亲合力的检测研究。     

二维导电金属有机骨架材料

金属有机骨架(MOFs)是由金属离子或簇与有机配体以配位键组装而成的晶态多孔材料,其高的孔隙率及功能可设计性使其广泛应用于各种领域.然而,传统MOFs多数电导率非常低,这严重制约了其在电学相关领域的发展.近年来,导电金属有机骨架尤其是二维导电金属有机骨架(2D ECMOFs)材料因其结构中独特的π-π堆积及π-d共轭作...     

求解参数识别反问题的同伦正则化方法

提出了求解参数识别反问题的同伦正则化方法,给出了相应的收敛性定理.数值结果表明该方法是一种快速的大范围收敛方法.     

反式乙烯基联吡啶表面增强拉曼光谱的密度泛函理论研究

反式乙烯基联吡啶具有极好的拉曼散射信号,经常用做探针分子.利用密度泛函理论(DFT)理论,采用BP86,BPw91和B3LYP等方法,Ag原子使用赝式基组,H,C,N等原子使用6-31+ +G(d,p)基组,计算了反式乙烯基联吡啶与银配合物(t-BPE-Ag)的Raman光谱,并且利用势能分布(PED)计算结果对t-BPE分子Raman光谱和SERS谱进行了详细的归属,DFT理论得到结果说明根据DFT理论计算t-BPE-Ag配合物得到的Raman光谱与实验SERS谱基本一致,并且键连Ag原子越多,与实验值会更接近,t-BPE-Ag配合物HOMO与LUMO的能级差估计在449～912 nm范围内.     

Fe掺杂ZnSe团簇结构和磁性质

采用密度泛函理论研究了Fe原子单掺杂和双掺杂(ZnSe)12团簇的结构、电子性质和磁性质.我们考虑了三种掺杂方式:替代掺杂,外掺杂和内掺杂.单掺杂时,外掺杂团簇是最稳定结构;而双掺杂时,内掺杂团簇是最稳定结构.团簇磁矩主要来自Fe-3d态的贡献,4s和4p态也贡献了一小部分磁矩.由于轨道杂化,相邻的Zn和Se原子上也产生少量自旋.不同掺杂团簇的总磁矩不同,在可调磁矩的磁性材料领域有潜在应用价值.     

掺钕微球的受激辐射激光和自受激拉曼散射

采用溶胶-凝胶法在SiO_2微球表面覆盖上一薄层Nd~(3+)掺杂SiO_2,并经电极放电熔融后形成表面光滑的高Q值微球.采用锥光纤将808 nm的抽运激光耦合入钕离子掺杂的高Q值微球形成回廊模,激发产生了1080—1097 nm波段受激辐射激光.由于所产生的激光有足够高的功率密度,在高Q SiO_2微球中激发产生了波长为1120—1143 nm一级自受激拉曼散射激光.推导了锥光纤掺钕微球组合的自受激拉曼散射的输出功率和阈值公式.描述了输出激光的特性:阈值、输出功率、线宽、边模抑制比.     

A high-throughput search for direct methanol fuel cell anode electrocatalysts of type PtxBiyPbz

We used a high-throughput method to screen for direct methanol fuel cell anode electrocatalysts in the Pt-Bi-Pb system. Previous studies showed that PtBi and PtPb (both NiAs structure type) were active electrocatalysts for the oxidation of formic acid, but only PtPb was active in oxidizing methanol. We synthesized thin films with continuous composition spreads of the three elements by magnetron sputtering at deposition temperatures from ambient to 510 °C. A fluorescence method was then used to identify compositions that were active toward methanol oxidation. Only films deposited between temperatures of 160 and 400 °C showed electrocatalytic activity. The areas that were active for methanol oxidation showed predominantly the NiAs structure type according to XRD, with optimal activity for compositions near PtBi_0.01Pb_0.53.     

电控聚合物分散液晶变焦全息透镜制作

介绍了相位型全息聚合物分散液晶(PDLC)材料全息透镜,在电场作用下液晶微滴折射率逐渐与聚合物折射率匹配,实现透镜电控变焦。研究了微米尺寸和纳米尺寸液晶微滴聚合物分散液晶材料配方特性和微观结构。采用优化纳米尺寸材料配方制作5~6μm聚合物分散液晶盒,采用离轴式平面波和球面波干涉全息写入光路,成功制作电控变焦聚合物分散液晶全息透镜样品。该透镜样品焦距为20 mm,能够正一级衍射放大成像。实现“0”,“1”变焦的驱动电压阈值为60 V。并进一步提出了基于聚合物分散液晶电控变焦元件集成叠加技术实现电控变焦光学成像系统的技术思路。