A reliable ab initio potential energy surface and vibrational states for the ground electronic state of HgH2(X1Sigma+g)

A three-dimensional global potential energy surface for the ground (X (1)Sigma(+)(g))electronic state of HgH(2) is constructed from more than 13,00 ab initio points. These points are generated using an internally contracted multireference configuration interaction method with the Davidson correction and a large basis set. Low-lying vibrational energy levels of HgH(2), HHgD, and HgD(2) calculated using the Lanczos algorithm are found to be in good agreement with the available experimental band origins. The majority of the vibrational energy levels up to 9000 cm(-1) are assigned with normal mode quantum numbers. Our results indicate a gradual transition for the stretching vibrations from the normal mode regime at low energies to the local mode regime near 9000 and 8000 cm(-1) for HgH(2) and HgD(2), respectively, as evidenced by a decreasing energy gap between the (0,0,n(3)) and (1,0,n(3)-1) vibrational states and bifurcation of the corresponding wave functions.     

钛胶的制备条件和物性关系

钛胶是新型有广泛用途的催化剂载体。本实验测定了钛胶的孔容、比表面积、铁含量和晶型结构；研究了钛胶的制备条件和物性关系，得到一些有实用价值的实验结果。     

Models of steroid binding based on the minimum deviation of structurally assigned 13C NMR spectra analysis (MiDSASA)

This paper develops a quantitative k-nearest neighbors modeling technique. The technique is used to demonstrate that a compound's biological binding activity to a receptor can be calculated from the minimum of the square root of the sum of squared deviations (SSSD) of a structurally assigned chemical shift on a template between the unknown compound to be predicted and a set of known compounds with known activities. When building models of biological activity, nonlinear relationships are built into the input training data. If a model is developed by selecting only compounds with minimum structurally assigned chemical shift deviations from the unknown compound, some of the nonlinear relationships can be removed. The smaller the total chemical shift deviation between a compound with known activity and another compound with unknown activity, the more likely it will have similar biological, chemical, and physical properties. This means that a model can be produced without rigorous statistics or neural networks. This technique is similar to structure-activity relationship (SAR) modeling, but instead of relying on substructure fragments to produce a model, this new model is based on minimum chemical shift differences on those substructure fragments. We refer to this method as minimum deviation of structurally assigned spectra analysis (MiDSASA) modeling. Modeling by the minimum deviation concept can be applied to other chemoinformatic data analyses such as metabolite concentrations in metabolic pathways for metabolomics research. A MiDSASA template model for 30 steroids binding the corticosterone binding globulin based on the activity factors of the two nearest compounds had a correlation of 0.88. A MiDSASA template model for 50 steroids binding the aromatse enzyme based on the average activity of the four nearest compounds had a correlation of 0.71.     

Role of thiol-disulfide exchange in insulin binding to its receptor.

The effects of reduction by DTT, oxidation by DTNB and treatment with NEM on the thiol contents and insulin binding to its receptor in mice liver membranes were studied. Reduction with DTT leads to a parallel increase in the thiol content and the specific binding of insulin to the membrane. Scatchard analysis of the results shows little change in the number of binding sites but a twofold increase of the binding constant. Washing the membrane with bound insulin by a DTT containing buffer results in a more marked increase in the release of bound insulin than washing with buffer alone, suggesting that part of the insulin is bound to its receptor by covalent disulfide linkages through a thiol-disulfide exchange reaction and reduction with DTT leads to a marked increase in this "disulfide-linked" insulin. Treatment with DTNB or NEM of the DTT-reduced membrane seems to reverse the effect of DTT reduction, although the reaction of the untreated membrane with DTNB or NEM had little or no effect on the specific binding of insulin. It is suggested that initially, part of the thiols responsible for the exchange reaction may not be available for reaction with DTNB and reduction with DTT generates further thiols leading to increased specific binding in general and increased insulin binding to the receptor through covalent disulfide linkages in particular.     

Purification of adipoyl-7-amino-3-deacetoxycephalosporanic acid from fermentation broth using stepwise elution with a synergistically adsorbed modulator

Multicomponent adsorption data of a fermentation broth containing adipoyl-7-amino-3-deacetoxycephalosporanic acid (adipoyl-7-ADCA), a cephalosporin precursor for 7-ADCA, and two key impurities, alpha-hydroxyadipoyl-7-ADCA and alpha-aminoadipoyl-7-ADCA were obtained from batch equilibrium and frontal chromatography tests. Amberlite XAD-1600 was chosen as the resin. A rate model was applied to simulate the chromatograms. An alkaline buffer, which by itself has no affinity for the resin, was used as the eluent. The widely used reversed-phase modulator model is inaccurate in explaining the stepwise elution data. A new model, the induced competition model, has been developed to account for apparent retention of the buffer in the presence of adsorbed species. Close agreement between the simulations and the data was achieved with the new model.     

含氢硅氧烷的硅氢加成反应

含氢硅氧烷的硅氢加成反应师彤，谢择民，王清正（中国科学院化学研究所北京１０００８０）关键词含氢硅氧烷，二乙烯基四甲基二硅氧烷，硅氢加成反应，~1ＨＮＭＲ铂催化硅氢加成的机理~［１，２］、副反应￣［３，４］、聚合物性能￣［３，５］等均有报道，个别文献用粘?..     

INFLUENCE OF DIALKYLZINC IN RARE-EARTH TERNARY CATALYST ON THE COPOLYMERIZATION OF CARBON DIOXIDE AND PROPYLENE OXIDE

Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.     

Synthesis and cofluorescence of Eu(Y) complexes with salicylic acid and o-phenanthroline

A series of dinuclear complexes of salicylic acid (HSal) and o-phenanthroline (Phen) with different molar ratios of Eu3+ to Y3+ have been synthesized. Their compositions are Eu(x)Y(1-x) (Sal)3(Phen) (x = 0 to approximately 1). Their UV spectra, IR spectra, and fluorescence spectra were studied. The UV spectra of the complexes reflect essentially absorption of the ligands for the fact that no obvious change of wavelength and band shape is found between the spectra of the complexes and that of the ligands except slight red shift. The IR absorption spectra indicate that salicylic acid is coordinated to the rare earth ions and chemical bonds are formed between rare earth ions and nitrogen atoms of o-phenanthroline. The fluorescence spectra of the complexes indicate that the fluorescence emission intensity of europium ion was enhanced by the addition of Y3+, which is referred to as cofluorescence. These facts show that not only the ligands but also the yttrium complex can transfer the absorbed energy to Eu3+ ion in the complexes. Formation of polynuclear complexes appears to be responsible for cofluorescence.     

Theoretical study on the molecule C30H20: five carbon–carbon single bonds linking a dodecahedrane cage and a pentaprismane cage

Using geometry optimization and DFT method at the B3LYP/6-31G* level of theory for C₃₀H₂₀, an equilibrium geometry is identified that has the form of polyhedral hydrocarbon with five carbon–carbon single bonds linking a dodecahedrane cage and a pentaprismane cage. Thus, this molecule is a tri-cage molecule with two pentaprismane cages and one dodecahedrane cage. Vibrational frequencies and the infrared spectrum are computed at the same level of theory. The heat of formation for C₃₀H₂₀ has been estimated in this paper. The heat of formation of C₃₀H₂₀ as well as the vibrational analysis indicates that this molecule enjoys sufficient stability to allow for its experimental preparation.     

Development and validation of a method for the determination of trace alkylphenols and phthalates in the atmosphere

An analytical method has been developed for the simultaneous extraction and determination of trace tertiary octylphenol (t-OP), technical nonylphenol isomers (NP), nonylphenol monoethoxylate isomers (NP1EO) and seven phthalates in the atmosphere using gas chromatography-mass spectrometry (GC-MS). High volume samples were collected using a high-volume pump equipped with a PUF/XAD-2 column for air and glass fiber filter for particles. The detection limits of the method for alkylphenols (APs) and the phthalates ranged from 0.0006 to 0.034 ng m⁻³ in air. The recoveries of t-OP, NP, NP1EO and the phthalates for the entire procedure were satisfactory (>69%). The method was successfully applied to the determination of the analytes in the atmosphere samples collected over land and the ocean. The concentrations of t-OP, NP, NP1EO showed decline trends from land to the open sea, and the phthalates present over land and the North Sea were comparable. It is suggested that the atmosphere is a significant pathway for the transport of alkylphenols and the phthalates in the environment.