Optical mm-wave generation by using external modulator based on optical carrier suppression

In this paper, we have theoretically investigated the transmission performance of the optical millimeter (mm)-wave generated by using an external modulator based on optical carrier suppression for the first time. According to our theory, the data signals carried by the optical mm-wave are transmitted in the dispersion fiber without fading but are degraded greatly because of the time shift of the code edges, which still limits the transmission distance. The experimental results agree well with our theory.     

流动对两层流体界面孤立波的影响

本文研究了两水平固壁间具有基本流动的两层不可压缩无粘无旋流体的浅水界面孤立波,利用多重尺度摄动方法求得了界面孤立波所满足的KdV方程和相应的单孤立波解,讨论了基本流动对界面孤立波的影响。     

透明陶瓷透光性能的影响因素

 研究了影响激光透明陶瓷透光性能的主要因素,讨论了陶瓷内部气孔和杂质颗粒等散射粒子、晶界结构中晶界折射率与晶粒折射率的差异以及晶界表面粗糙度等因素对陶瓷透光性能的影响,并定量分析了激光陶瓷透过率随气孔尺寸、气孔率、晶粒相对晶界折射率以及晶界表面粗糙度的变化关系。结果表明： 陶瓷的透过率随着气孔率的减小而增大,但透过率随气孔尺寸的增大而呈现出周期性振荡,且当气孔尺寸与入射光波长可比拟时,陶瓷的透过率会明显降低;在晶界结构中,晶界的折射率与晶粒的折射率相差越小,陶瓷的透过率就越高;晶界表面粗糙度越大,透过率越低。然而,晶界折射率不同于晶粒折射率,这使得其陶瓷透过率降低的程度比对晶界表面粗糙度的影响明显得多。在陶瓷制备过程中,需要重点排除尺寸与入射波长可比拟的气孔, 以抑制晶界结构中第二相的产生。     

Large spot size and low-divergence angle operation of 917-nm edge-emitting semiconductor laser with an asymmetric waveguide structure

GaInAs/AlGaAs comprehensive-strained three-quantum-well lasers with asymmetric waveguide are designed and optimized. With this design, the optical field in the transverse direction is extended, and a semiconductor laser with large spot is obtained. For a 300-μm cavity length and 100-μm aperture device under continuous wave (CW) operation, the measured vertical and horizontal far-field divergence angles are 12.2° and 3.0°, respectively. The slope efficiency is 0.44 W/A and the lasing wavelength is 917 nm.The equivalent transverse spot size is 3 μm for the fundamental transverse mode, which is a sufficiently large value for the purpose of coupling and manipulation of light.     

反铁电相变陶瓷低频发射换能器

在具有高阶形式的广义压电方程基础上,讨论掺镧改性锆锡钛酸铅PbLa(Zr,Sn,Ti)O3(PLZST)反铁电相变陶瓷的非线性机电耦合问题,得到类似传统线性压电方程的近似线性电致伸缩方程,给出了一种解决非线性反铁电相变陶瓷换能器电声转换问题的分析方法,即在直流偏置状态下对PLZST反铁电相变陶瓷的材料参数进行近似线性等效化处理进而分析换能器的电声转换问题.在此基础上,研制了水中谐振频率1.1 kHz新型反铁电相变陶瓷低频弯张换能器.湖上试验结果表明,与同结构同尺寸压电陶瓷弯张换能器相比,目前反铁电换能器样品的发射电压响应约高3dB,声源级高出9dB,并验证了本文所提出的分析非线性反铁电相变陶瓷换能器方法的正确性.     

The rapid uncertainty prediction of the ocean-acoustic coupled model

Focusing on the rapid prediction of acoustic field uncertainty in environment with temporal and spatial sound speed perturbation, evolvement of sound speed structure over time is predicted based on the ocean-acoustic coupled model to obtain the uncertainty distribution of the vertical structure of sound speed. Further, a method combining the arbitrary polynomial chaos expansion with the empirical orthogonal function is proposed to reduce the dimensionality of uncertain parameters and to obtain the uncertainty distribution of the acoustic field. Simulations have shown that the computational complexity can be reduced by 2 orders of magnitude compared to the conventional polynomial chaos expansion while ensures the same precision.Moreover, the computational complexity is not influenced by the complexity of the sound speed profile. The acoustic field and uncertainty predicted in uncertain environment by proposed method also have been tested with the experimental data.     

基于多模态PID的曳引机驱动控制系统设计

曳引机的驱动控制系统是垂直升降电梯的关键设备,对电梯性能具有重要影响,具有较大的研究价值。对一种基于多模态PID控制的永磁同步曳引机电梯驱动控制系统进行了研究。给出了曳引机驱动控制系统的总体设计方案,将系统分为主控模块、驱动模块和信号采集模块进行设计并介绍了各模块硬件电路的设计。针对曳引机控制采用了电流、速度双闭环控制算法,给出了主控制器DSP的软件流程设计,并对速度环采用的多模态PID控制算法进行了研究。在电梯公司的试验塔对设计的驱动控制系统进行现场调试,调试结果表明电梯在高、中、低速下都能够良好地跟踪给定的S型速度曲线,且超调量较小,稳态误差较小,可以满足电梯控制的性能指标要求。     

中国散裂中子源旋转线圈测量系统研制

中国散裂中子源(CSNS)加速器主要由一台直线加速器、一台快循环加速器以及低能、高能输运线组成。针对CSNS加速器部分直流磁铁研制了一套旋转线圈测量系统。对系统的研制方案、功能、精度、完成的磁铁类型以及部分测量结果进行介绍。该系统解决了CSNS批量磁铁之间的不同中心高度、质量、有效长度、磁场强度的兼容性难题。经过测试运行,积分场测量重复性误差好于±0.02%,空间谐波重复性误差好于0.005%,磁中心测量重复性误差好于±0.03 mm,顺利完成了中国散裂中子源工程150台多种类型磁铁的检测任务。     

A luminescent dinuclear Eu(III) complex based on 2,8-bis(4′,4′,4′,-trifluoro-1′,3′-dioxobutyl)-dibenzothiophene for light-emitting diodes

A dinuclear Eu (III) complex Eu₂(dbt)₃·4H₂O was synthesized, where H₂dbt was 2,8-bis(4′,4′,4′,-trifluoro-1′,3′-dioxobutyl)-dibenzothiophene. The complex emits the characteristic red luminescence of Eu³⁺ ion due to the ⁵D₀→⁷F_J(J=0-4) transitions under 395 nm-light excitation with a luminescent quantum efficiency of 17%. The complex is thermally stable up to 280 °C. It was found that the complex can be effectively excited by a 395 nm-emitting InGaN chip. Bright red light was obtained using the complex as light color-conversion material.