A sensitive method of determining optic axis azimuth based on laser feedback

A sensitive method to determine the optic axis azimuth of the birefringence element is presented, which is based on laser feedback. The phase difference between the two intensities in birefringence feedback changes with the angle between the optic axis of the birefringence element and laser original polarization. The phase difference is highly sensitive to the relative position of the optic axis and the laser original polarization. This method is used to highly precisely determine the optic axis azimuth, and is able to distinguish between the fast axis and the slow axis of the birefringence element. Theoretical analysis and experimental results are both demonstrated.     

Numerical analysis of the resonance mechanism of the lumped parameter system model for acoustic mine detection

The method of numerical analysis is employed to study the resonance mechanism of the lumped parameter system model for acoustic mine detection. Based on the basic principle of the acoustic resonance technique for mine detection and the characteristics of low-frequency acoustics, the “soil-mine” system could be equivalent to a damping “mass-spring” resonance model with a lumped parameter analysis method. The dynamic simulation software, Adams, is adopted to analyze the lumped parameter system model numerically. The simulated resonance frequency and anti-resonance frequency are 151 Hz and 512 Hz respectively, basically in agreement with the published resonance frequency of 155 Hz and anti-resonance frequency of 513 Hz, which were measured in the experiment. Therefore, the technique of numerical simulation is validated to have the potential for analyzing the acoustic mine detection model quantitatively. The influences of the soil and mine parameters on the resonance characteristics of the soil–mine system could be investigated by changing the parameter setup in a flexible manner.     

Consistency proof of two denoising methods and the parameter selection of PDE filtering method for ESPI

Electronic speckle pattern interferometry （ESPI） is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the oriented feature of ESPI fringes, i.e., the second-order oriented partial differential equation （SOOPDE） and oriented, regularized quadratic-cost function filtering methods, are first proven to be consistent. An important question in solving partial differential equation, i.e., how to select suitable parameters in an adaptive manner, is then discussed. The computer-simulated and experimentally obtained ESPI fringe patterns and phase map are processed by the SOOPDE filtering model with adaptive selective parameters. The qualitative and quantitative analyses demonstrate that the parameters selected by the adaptive method are effective and suitable for the SOOPDE filtering model.     

设计和实现三维空间任意庞加莱截平面电路

庞加莱截面法是简化分析复杂动力系统运动状态的有效方法.为实现在线方便观测复杂系统的状态,本文设计并实现了三维任意庞加莱截平面电子电路.文章首先详细分析和研究了设计三维任意庞加莱截平面电路的关键性问题,然后分类设计和实现了物理电路.由于蔡氏电路具有丰富的动力学行为,因此以典型的蔡氏电路作为实验待测动力系统,对设计的截平面电路进行了大量的物理实验,测出了蔡氏电路各种状态下的截平面图,以及同一种混沌状态下选取不同截面的测试实验.实验中采用了两种双踪示波器(模拟示波器和数字示波器)在线实测了庞加莱截平面映射和状态图.与此同时,利用Matlab进行了计算机仿真辅助实验.所有实验结果表明设计的庞加莱截平面电路具有实用性和有效性.     

基于多重散射强度和偏振特征的舰船尾流气泡激光探测方法

研究多重散射效应对舰船尾流气泡群光散射强度和偏振特征的影响是舰船光尾流探测以及新型光自导鱼雷研究的基础. 基于矢量Monte Carlo方法建立了舰船尾流气泡群激光后向探测仿真模型, 重点研究了尾流气泡群的多重散射机理,分析了多重散射效应、尾流气泡群密度对回波信号强度和偏振特征的影响规律. 基于粒子碰撞重要性抽样的基本思想, 在传统能量接收方法的基础上, 提出了回波光子偏振贡献接收方法和回波信号偏振信息统计方法, 解决了小视场系统光子返回概率低无法形成回波能量的难题. 构建了模拟尾流气泡群激光散射强度和偏振探测实验平台, 从实验的角度验证了模拟结果的准确性. 实验和模拟结果的一致性表明, 利用回波强度、偏振信息可表征气泡群距离、密度信息, 从而可对舰船尾流特别是低密度尾流进行高精度的探测和辨识. 关键词： Monte Carlo 偏振 多重散射 气泡     

飞秒强激光场中水分子的电离激发

本文运用含时密度泛函理论和分子动力学非绝热耦合的方法, 研究了水分子在不同极化方向的激光场中的电离和动力学行为. 计算结果表明, 对应相同的极化方向, 随着激光强度的增加, 水分子的电离增强; 对于相同强度的激光, 当激光极化方向沿水分子对称轴方向时, 水分子的电离最强, 当激光极化方向垂直水分子对称轴方向时, 水分子电离受到最大程度的抑制. 对水分子偶极矩的研究表明, 当分子处于线性响应区域时, x方向的激光只能激发起x方向的偶极振动而y方向的激光只能激发起y方向的偶极振动. 对水分子的键长和键角的研究表明, 在激光场中水分子的键长变长, 键角变大, 但变化幅度随着激光极化角的增大而减小. 此外, 研究还发现, 虽然在不同极化方向的激光脉冲的驱动下, 水分子OH键的振动频率与激光频率相当, 在脉冲关闭后, 振动频率减小, 但激光场的极化方向对水分子振动模式具有选择性. 关键词： 含时密度泛函理论 分子动力学 水分子 电离     

基于背景光调制的复合光傅里叶变换轮廓术

提出一种基于背景光调制的用于傅里叶变换轮廓术测量范围的复合光栅,该光栅通过调制一正弦条纹和不含任何相位信息的背景光来抑制零频,较基于相移技术的复合光栅有更大的优势:背景光只含直流分量,使得复合光栅的频谱更加简单,有利于滤出载波信息,提高测量精度;对从复合光栅中解调出来的背景光只涉及平均值校准,校准过程更为简单;解调出的背景光与物体表面的反射率成正比,具有潜在的应用价值。采用Matlab程序对该复合光栅进行了数值模拟,并对该光栅实用性进行了实验研究,结果证实了该光栅用于抑制零频、扩大傅里叶变换轮廓术测量范围的有效性,且提高了测量精度。     

一种直接用示波器观测单变量非线性系统状态的新方法

为解决用示波器观测单变量非线性系统难的问题, 本文提出了一种45°线法, 该方法能将随时间变化的连续信号以特殊的方式转换成直角坐标上45°线上的点图, 并可用通用双踪示波器 (模拟或数字均可)直接显示出来, 从而达到直接方便地观测和分析单变量被测系统运行时的各种状态, 如周期稳定态, 局部和全局不稳定态. 文中详细阐述了该方法的机理. 同时, 研究和解决了设计实现该方法物理电路的关键问题, 即从连续变化的信号中提取出能反映系统状态的有用信号. 由于蔡氏电路是典型的非线性系统, 且能随参数的变化产生各种丰富的状态, 本文选用该电路作为被测系统进行了大量的物理实验, 实验结果证实了该方法的有效性和实用性. 关键词： 45°线法 单变量系统 系统状态 双踪示波器     

受激Raman谱中的宏观极化干涉

研究了Rb⁸⁵原子蒸气D1线系统中的受激Raman增益与损耗现象. 实验中观察到 随着抽运光失谐量的增大, 受激Raman谱明显地呈现出一个从增益到损耗的陡峭转变. 从缀饰态模型出发, 我们提出这是对探测光有相反贡献的不同速度原子群之间极化干涉的结果. 关键词： 受激Raman谱 电磁感应透明 极化干涉     

Variational iteration method — a promising technique for constructing equivalent integral equations of fractional order

The variational iteration method is newly used to construct various integral equations of fractional order. Some iterative schemes are proposed which fully use the method and the predictor-corrector approach. The fractional Bagley-Torvik equation is then illustrated as an example of multi-order and the results show the efficiency of the variational iteration method’s new role.