Compressed-CO2-assisted patterning of polymers

We report a facile route to pattern polymer surfaces with the aid of compressed CO(2), termed the compressed-CO(2)-assisted imprint method. In this method, compressed CO(2) serves as a plasticizer for polymers (such as poly(methyl methylate) and polystyrene), which leads to a tremendous reduction in the glass transition temperature and viscosity of the polymers. Nylon fabrics and anode aluminum oxide porous membranes are used as molds, respectively, to pattern the softened polymers at relatively low temperatures, resulting in patterns at the scale of micrometers and nanometers on the surface of polymer films. The patterned structures can be tuned by changing CO(2) pressure and temperature in the imprinting process. This method is simple and environmentally benign. It also can be operated at low temperatures, for instance, ambient temperature.     

PHOTODESTRUCTION OF BACTERIORHODOPSIN

Abstract— Suspensions of purple membrane fragments showed obvious signs of degradation after illumination with intense pulses of light from 10 ns frequency doubled Nd: YAG laser at 532 nm with intensity densities in excess of 1 MW/cm². Using controlled illumination, a small fraction of the bacteriorhodopsin protein molecules were randomly destroyed in samples with a low salt concentration (12.5 m M ) and pH = 7.9. Calculations using information from the changes in the optical absorbance spectrum and transient changes in the optical absorbance spectrum during the photocycle support a model where one protein molecule of the bacteriorhodopsin trimer is photodestroyed, the other two protein molecules switch to a blue state . In the blue state , the protein molecules have a red shifted absorption, with a peak near 600 nm. The blue state molecules show transient absorption changes at 656 nm that are similar to the native bacteriorhodopsin, except the O state is missing or altered. Additionally, the changes in curvature of the purple membrane fragments that occur during the photocycle of intact protein molecules are severely depressed. The addition of salts to the photodestroyed suspension can change the blue state molecules back to a state with an absorption maximum at 568 nm. The salt ions probably shield the other members of the trimer from the photodestroyed protein. In these reconstituted samples, the O state is observed at 656 nm; however, the membrane bending is not observed.     

电化学生物传感器在环境监测中的应用及发展前景

简要介绍了电化学生物传感器的工作原理,重点论述了电化学生物传感器在环境监测领域的应用及其研究进展,主要包括水环境污染物和大气污染物的监测,以及农药残留的监测等.同时,对电化学生物传感器的发展方向及前景进行了展望.     

基于桔子皮废弃物从含铼废水中高效、高选择地提取钼

以生物质废弃物桔子皮为原料, 直接氨化后得到OW-NH₂生物吸附剂, OW-NH₂对Mo(Ⅵ)的吸附具有很高的选择性, 对其他共存离子Re(Ⅶ)、Pb(Ⅱ)、Fe(Ⅲ)、Zn(Ⅱ)、Mn(Ⅶ)、Ca(Ⅱ)和Cu(Ⅱ)基本不吸附, 尤其是对Mo(Ⅵ)、Re(Ⅶ)的分离具有高选择性。红外光谱分析表明阴离子形式的H₃Mo₇O₂₄^3-、H₂Mo₇O₂₄^4-、HMo₇O₂₄^5-、Mo₈O₂₆^4-、Mo₇O₂₄^6- 和MoO₄^2-与引入在纤维素上的RNH₃⁺发生离子缔合反应。OW-NH₂吸附Mo(Ⅵ)的过程符合Langmiur吸附模型, 最大吸附量为1.71 mol·kg^-1。另外, OW-NH₂对工业实际料液的动态模拟实验的结果表明Mo(Ⅵ)回收率可达99%以上。     

富氮多孔有机聚合物催化制备α⁃氰基肉桂酸乙酯

α-氰基肉桂酸乙酯作为含多种官能团的缺电子烯烃, 是一种极具应用价值的有机合成反应底物, 主要通过催化Knoevenagel缩合反应获得. 本文以多聚甲醛和三聚氰胺为前驱体, 采用溶剂热法制备富氮多孔有机聚合物mPMF, 经K₂CO₃处理得到K₂CO₃-mPMF-X(X=1, 10, 50). 考察了mPMF在苯甲醛和氰乙酸乙酯Knoevenagel缩合反应中的催化性能, 通过mPMF与K₂CO₃-mPMF-X催化活性的比较, 探讨了碱性强弱对Knoevenagel缩合反应的影响, 并对催化反应机理进行了探索. 结果表明, 催化剂中丰富的氮物种为反应提供了碱性环境和大量的碱性活性位点, 催化剂碱性强弱的控制是催化合成α-氰基肉桂酸乙酯的关键因素. mPMF在甲醇溶剂中于60 ℃反应3 h后, 苯甲醛转化率为97%, 目标产物选择性在99.9%以上.     

端粒酶活性检测研究进展

端粒酶活性检测方法经过近30年的不断改革与发展,取得了巨大突破。该文重点综述了近3年的端粒酶活性检测方法,其中包括化学反应发光法、电化学法、荧光分析法、比色法等,旨在更加全面地了解目前端粒酶活性检测的研究进展,为设计新的端粒酶活性检测方法和克服端粒酶活性检测方法在临床试验中的挑战提供思路。     

NiFe2O4对刚果红的光催化降解性能研究

采用水热法合成了尖晶石型NiFe₂O₄,并利用X射线粉末衍射仪对其物相进行了表征,利用紫外-可见分光光度计对其光催化降解刚果红的性能进行了研究。以刚果红为光催化降解底物,探究了刚果红初始浓度、催化剂用量、溶液pH、不同光源等因素对NiFe₂O₄光催化降解刚果红活性的影响。结果表明,当刚果红溶液浓度为20 mg/L、催化剂NiFe₂O₄的用量为0.065 g、pH 2~10、在太阳光下照射480 min时,刚果红的降解率高达99%以上,催化剂性能稳定,适合处理刚果红类有机污染物。     

微弱日盲紫外电晕自动实时检测方法

针对目前商用日盲紫外/可见光双谱段电晕探测仪对故障的判定效率低且容易受噪声干扰问题,本文提出了一种微弱日盲紫外电晕自动实时检测方法。在分析电晕目标和噪声时间域统计特性的基础上,该方法利用电晕目标在时间域连续的特点,首先完成灰度图像二值化、形态学膨胀等预处理,其次将N帧连续图像累加后阈值化,最后进行特征提取,获取电晕位置、面积等特征信息,实现电晕的自动实时检测。在完成设备辐射标定的基础上,可立即回溯得到故障的光子计数参考值。建立了该方法的探测概率、虚警率数学模型。将其在高速数字处理平台TMS320DM642上实现并输入测试视频,结果表明:在典型参数情况下该方法单次检测虚警概率为2.85×10^-5,处理时间小于120 ms,可实现微弱日盲紫外电晕的实时检测。     

Urothermal Synthesis,Crystal Structure,and Luminescent Property of a New Zn(Ⅱ) Coordination Polymer Constructed from TerephthalicAcid and 5-Methyl-1H-tetrazole Ligands

A new luminescent Zn(II) compound, [Zn(pbdc)0.5(mtz)(DMPU)]n(1, H2pbdc = terephthalic acid, Hmtz = 5-methyl-1H-tetrazole, DMPU = N,N'-dimethylpropyleneurea), has been urothermally synthesized and characterized by elemental analysis, IR, X-ray powder diffraction(PXRD) and single-crystal X-ray diffraction. The title compound crystallizes in orthorhombic Pbca space group with a = 17.2649(5), b = 10.4680(3), c = 17.4457(7) ?, V = 3152.94(18) ?3, C12H17N6O3Zn, Mr = 358.71, Z = 8, Dc = 1.511 g/cm3, F(000) = 1480, μ = 1.579 mm-1, the final R = 0.0379 and wR = 0.0971 for 2785 observed reflections(I 2?(I)). Single-crystal X-ray structural analysis reveals that compound 1 features a 2D undulated layer with a 3-connected hcb topology. Moreover, the luminescent properties of 1 have also been investigated in the solid-state at room temperature.