Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

用好插图事半功倍--浅谈"机械波"的教学

物理插图能起到形象地再现物理情景，辅助解释物理原理的作用．现行人教版物理第二册（必修加选修），第十章“机械波”第一节的知识“波的形成和传播”是该章的重点，本节插图10-5“横波的形成”又是该节的教学重点．这幅插图用得好，直接为后面的波的图像教学及用图像解决问题打下坚实的基础．     

添加助剂的钙钛矿型氧化物NdMO_3上的甲烷氧化偶联——Ⅱ.15% Li_2O/NdMO_3(M=Cr、Mn、Fe、Co、Ni)上的OCM反应研究

在添加了15%Li_2O的NdMO_3(M=Cr、Mn、Fe、Co、Ni)上进行了甲烷氧化偶联(OCM)反应研究.通过改变反应气中CH_4:O_2浓度比,在氧化态和“脱氧态”催化剂上的CH_4脉冲反应,探讨了表面吸附氧和晶格氧在OCM反应中的作用以及NdMO_3中不同金属离子(M)对OCM反应活性的影响等.     

The practice for eight-year operation of the cobalt-60 irradiation facility at Beijing Radiation Application Research Center

The radiation facility was made by Sulzer Company in Switzerland. The designed capacity is 3.7 × 10¹⁶Bq( 1MCi) and 12.21 × 10¹⁵Bq(330kCi)of Cobalt -60 source was loaded at the first phase. Current cobalt -60 source-loading is 2.4 × 10¹⁶Bq(650kCi). The equipment assembling and installation regulating and testing were completed at the end of 1988. The facility was put into commissioning in 1989. It operates 7000–8000 hours per year. The facility has been utilized to carry out many research work and irradiate many kinds of items. Lots of economical benefits have been gained since then. Now it is becoming a radiation processing model base in China. This paper summarized the strong and weak points of the design of the facility through in eight years' practice and analysed the economical benefits.     

激光感生碰撞能量转移的四能级理论模型

首次考虑了两个中间态对激光感生碰撞能量转移的影响，发展了激光感生碰撞能量转移的四能级理论模型，推导出态振幅的运动方程，并给出碰撞截面的近似表达式，通过对Ｅｕ－Ｓｒ和Ｃｓ－Ｓｒ系统的数值计算表明，当频率差│ω２１│大小和│ω４３│可以相比时，利用三能级近似理论就难以获得令人满意的计算结果，而四能级理论模型则适合于任何情况下的激光感生碰能量转移。     

Picosecond four-wave mixing reflectivity of GaAs at 1.06 μm

The picosecond degenerate four-wave mixing reflectivity of semi-insulating gallium arsenide at 1.06 m is calculated in this paper. The dependence of the reflectivity on the pump and signal fluences is measured. Reflectivities of more than one are possible. The Fourier components of the excited-carrier densities are calculated as a function of the pump fluence. The wavefront-correction property of this reflectivity is demonstrated with a lens group in the signal beam.     

Kinetics of the photodissociation iodine laser with slow pumping

Systematic calculations of maximum inversion were performed for iodine photodissociation laser in dependence on the mixture composition. The flash-lamp radiation was modelled as emanating from an optically thin Xe plasma. Duration of the pumping pulse is about 300 s. The sensitivity of the model to the values of kinetic constants was also tested.