三色圆偏振激光组合脉冲驱动氦原子产生椭圆偏振的阿秒脉冲

我们提出利用频率为ω,3ω和强度较弱的2ω组成的三色圆偏振激光组合脉冲驱动氦原子能够得到椭偏率较大的阿秒脉冲链的一种方法.通过强场近似方法,计算了氦原子在两色和三色圆偏振激光组合脉冲驱动下发射高次谐波谱及其合成阿秒脉冲链,比较了氦原子(初态为s态)在这两种情况下发射高次谐波谱的特点及其合成阿秒脉冲链椭偏率的大小,结果发现,在反旋的两色ω,3ω激光脉冲基础上加入了频率为2ω的第三色激光脉冲联合作用到氦原子上,所得到的阿秒脉冲链的椭偏率相对于双圆场情况下有所增加,通过调整ω,3ω激光的强度比,并且选择适当的第三色激光的强度,对初态为s态的原子,仍能够得到具有较大椭偏率的阿秒脉冲链.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

Copper‐Catalyzed Aerobic Oxidative C?C Bond Cleavage for C?N Bond Formation: From Ketones to Amides

A novel copper‐catalyzed aerobic oxidative C(CO) C(alkyl) bond cleavage reaction of aryl alkyl ketones for C N bond formation is described. A series of acetophenone derivatives as well as more challenging aryl ketones with long‐chain alkyl substituents could be selectively cleaved and converted into the corresponding amides, which are frequently found in biologically active compounds and pharmaceuticals.     

Using electrospray laser desorption ionization mass spectrometry to rapidly examine the integrity of proteins stored in various solutions

Electrospray laser desorption ionization mass spectrometry (ELDI/MS) allows the rapid desorption and ionization of proteins from solutions under ambient conditions. In this study, we have demonstrated the use of ELDI/MS to efficiently examine the integrity of the proteins stored in various solutions before they were further used for other biochemical tests. The protein standards were prepared in the solutions containing buffers, organic salts, inorganic salts, strong acid, strong base, and organic solvents, respectively, to simulate those collected from solvent extraction, filtration, dialysis, or chromatographic separation. Other than the deposit of a drop of the sample solution on the metallic sample plate in an ELDI source, no additional sample pretreatment is needed. The sample drop was then irradiated with a pulsed laser; this led to desorption of the analyte molecules, which subsequently entered the ESI plume to undergo post-ionization. Because adjustment of the composition of the sample solution is unnecessary, this technique appears to be useful for rapidly evaluating the integrity of proteins after storage or prior to further biochemical treatment. In addition, when using acid-free and low-organic-solvent ESI solutions for ELDI/MS analysis, the native conformations of the proteins in solution could be detected.

A General and Highly Selective Palladium‐Catalyzed Hydroamidation of 1,3‐Diynes

A chemo‐, regio‐, and stereoselective mono‐hydroamidation of (un)symmetrical 1,3‐diynes is described. Key for the success of this novel transformation is the utilization of an advanced palladium catalyst system with the specific ligand Neolephos. The synthetic value of this general approach to synthetically useful α‐alkynyl‐α, β‐unsaturated amides is showcased by diversification of several structurally complex molecules and marketed drugs. Control experiments and density‐functional theory (M06L‐SMD) computations also suggest the crucial role of the substrate in controlling the regioselectivity of unsymmetrical 1,3‐diynes.     

Optimization of detection device geometry for NIR spectroscopy using a three-layered model of stone fruit

The influences of detection device geometry and fiber optic parameters on near infrared spectroscopy measurements were assessed using stone fruit models based on Monte Carlo simulation. The stone fruit was modeled as concentric spherical layered tissues including the skin, the flesh and the core. The choices of the detection angle, the diameter of the detection fiber, the numerical aperture, and the height of the probe were discussed. Receiving diffuse reflectance signals at detection angles in the range of 35°–50° and normalizing the detection signals by the collection area and the solid acceptance angle prior to use are suggested. Fiber probes with diameters D = 0.06 cm or 0.1 cm, NA = 0.20 or 0.30, and height h ≤ 0.8 cm are preferred. The probe deflection angle should be limited to within ±5° to guarantee measurement accuracy.     

Increased rigidly triaxial deformations in neutron-rich Mo,Ru isotopes

Pairing-deformation-frequency self-consistent crankingWoods-Saxon model is employed to investigate the triaxiality in the ground states of the neutron-rich even-even Mo, Ru isotopes. Deformation evolutions and transition probabilities have been studied, giving the triaxial shapes in their ground states. The kinematic moments of inertia have been calculated to illustrate the gradually rigid deformation. To understand the origin of the asymmetry shape in this region, we analyze the evolution of single-particle orbits with changing γ deformation. The present calculations reveal the importance of the triaxial deformation in describing not only static property, but also rotational behaviors in this mass region, providing significant probes into the shell structure around.