四个麦芽品质性状的杂种优势和相关分析

本文对四个主要麦芽品质性状—a一淀粉酶活力、麦芽汁粘度、麦芽汁色度和搪化力进行了杂种优势和相关分析.(1)相对优势结果表明，在84个组合次中，呈正向优势的46个，占54.76男，负向优势34个，占40.48男，无显性4个，占4.75男;(2)四个品质性状的中亲优势平均值分别为一6.117、一9.965 40.452和一。.545s a-淀粉酶活力和糖化力的超高亲优势分别为一14.578和一8.201,麦芽汁粘度和色度的超低亲优势分别为5.442和70.455.四个性状杂种优势的变异系数均很大.(3)麦芽汁色度的F，对MP的回归系数(B)和相关系数(r)均达显著水平，分别为。..43和0.50，麦芽汁粘度的相关系数达显著水平，为一。.45,其余均未达显著水平，(4)除麦芽汁色度性状外，另三个性状的中亲优势、超亲优势和特殊配合力的相关均达显著或极显著水平.(5)四个麦芽品质性状间的相关结果表明，仅有a-淀粉酶活力和麦芽汁粘度间呈极显著负相关(r=一0.56').最后，文章根据实验结果，就啤酒大麦麦芽品质改良的遗传育种及其杂种优势应用进行了初步讨论.     

The 23 K superconducting phase YPd2B2C

We have carried out a systematic structural, electric, and magnetic study on Y---Pd---B---C samples with different compositions with emphasis on the as-cast and annealed YPd₅B₃C_0.3 which was first reported to superconduct at 23 K by Cava et al. We found that the tetragonal body-centered YPd₂B₂C with lattice parameters a=3.71 Å and c=10.81 Å is the phase responsible for the 23 K superconductivity and that YPd₂B₂C is metastable, which is consistent with the suggestion made by Cava et al. [1]: it is not stable at high temperatures nor stabilizable by Ni doping, although its isostructural compound, YNi₂B₂C, exists. Two new phases with Y:Pd ratios of 1:7 and 2:3, respectively, have also bee detected.     

聚丙烯微孔膜的等离子体接枝聚合改性

利用拉伸时的晶型转变致孔特性,从β晶相聚丙烯经单向或双向拉伸制得了新型聚丙烯微孔膜、用等离子体接枝聚合技术接上了亲水性聚合物如聚丙烯酸、聚丙烯腈等。研究了等离子体处理时间、单体性质对得到的亲水膜的亲水性、离子/溶质渗透性的影响。发现接枝聚丙烯酸的双向拉伸膜对Na~+、Mg~(++),尿素有较大的渗透性,并具有优良的形状稳定性。     

苯对N,N-二甲基甲酰胺化合物1H NMR的影响研究

本文研究了N,N-二甲基甲酰胺(DMF)在四氯化碳和苯混合溶剂中的¹H NMR。观察到N,N-二甲基甲酰胺(DMF)分子中两个甲基和混合溶剂中苯的共振吸收峰的化学位移随苯的摩尔分数增加而逐渐移向高场,而且两个甲基共振吸收峰向高场移动的程度不同,α甲基较β甲基为甚。DMF分子中两个甲基和混合溶剂中苯的化学位移可以用线性方程表示(δ=A+Bx),这里x是混合溶剂中苯的摩尔分数。相关系数R接近于-1。     

Chemical Speciation of Amphoteric Ions on Semi‐Dry Scrubber Residue and Bag‐House Ash from MSWI

Two series of size‐fractionated combusted residues, a bag‐house ash and a scrubber residue, from a municipal solid waste incinerator (MSWI) were prepared and extracted by means of sequential chemical extraction (SCE) procedures proposed by Tessier. Concentrations of water‐soluble phase, exchangeable phase, carbonated phase, Fe/Mn oxide phase, organic matter phase, and residual phase bound amphoteric metals (Pb and Zn) were obtained, and have been compared with those of single batch extraction of toxic characteristic leaching procedure (TCLP). In each size fraction of baghouse ash or scrubber residue, lead or zinc shows a common phenomena that the TCLP value is always lower than the content of the water‐soluble fraction. For lead, baghouse ash has a significant size‐dependent distribution on the water‐soluble phase to perform a size‐dependent test of lead in the TCLP test. The zinc TCLP data having less size dependence might be due to that neither the baghouse ash nor the scrubber residue has a size‐dependent distribution on the water‐soluble zinc phase.     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

Shape-controlled synthesis of nanocrystalline titania at low temperature

The interesting shape (shuttle-like, sphere with needles, uniform particles) rutile titania were prepared by the hydrolysis of TiCl₄ in high acidic aqueous solution in the absence or presence of PEG-1000. PEG-1000 acted as dispersant, which could control the shape and size of the precipitate of titania. As a result, shuttle-like nanocrystalline appeared and the aggregation was improved with the increase of the amount of acid and the decrease of the concentration of TiCl₄ in the absence of PEG-1000. Uniform nanoparticles were obtained in the presence of PEG-1000 and the diameter of the particles decreased with increasing the amount of PEG-1000. This process simplification will lower production cost and make continuous process possible. The products were analyzed using X-ray diffractometer, transmission electron microscopy.     

A hybrid-Trefftz element containing an elliptic hole

Much work on special elements that simplify geometrical modelling of structures containing holes, cracks and/ or inclusions has been reported extensively in the literature. This paper presents a hybrid-Trefftz element containing elliptic hole formulated using Hellinger–Reissner principle by employing trial functions based on the mapping technique and the Cauchy integral method. The element presented in this paper could be regarded as an improved formulation over Piltner [Special finite elements with holes and internal cracks, Int. J. Numer. Methods Eng. 21 (1985) 1471–1485] element because the chosen trail functions in this paper have provided relatively more stable solutions. The use of the element with other ordinary displacement-based finite elements has also yielded very accurate solutions even when very coarse meshes relative to the size of the elliptic hole have been used.     

单个波长到多个波长的变换实验

报道一种波长变换的新方法.采用此方法不需要任何泵浦光便能够直接将信号光变换成在特定谱宽内的任意多个任意波长的变换光,这对于将来的波分复用光网络提供了较大的方便.此波长变换的原理是利用色散位移光纤的非线性效应产生超连续光谱(SC)信号,由于这种SC信号携带有变换光信号,对这种连续谱进行滤波便能够得到所需要的任意频率的变换信号.此变换方式具有变换频带宽,偏振不敏感的优点。     

A high-gain porous silicon metal–semiconductor–metal photodetector through rapid thermal oxidation and rapid thermal annealing

2 tungsten lamp at 1.83 mA excited by a 0.85-mW 675-nm laser diode. We also demonstrate that the dark current could be greatly reduced through rapid thermal oxidation and rapid thermal annealing. Received: 4 August 1997/Accepted: 28 May 1998