富马酸丙酚替诺福韦合成工艺改进

对富马酸丙酚替诺福韦的合成工艺进行了改进,以干燥的替诺福韦为起始原料,与亚磷酸三苯酯反应得到(R)-9-(2-(苯基磷酰基甲氧基)丙基)腺嘌呤（3）; 3被氯化亚砜氯代得(R)-9-(2-(((苯基)(氯代)(磷酰基)甲氧基)丙基)腺嘌呤（4）; 4与L-丙氨酸异丙酯盐酸盐缩合得9-((R)-2-(((S)-((1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（5）; 5经析晶纯化得9-((R)-2-(((S)-（((S)-1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（丙酚替诺福韦,6）; 6与富马酸成盐得富马酸丙酚替诺福韦,其结构经¹H NMR, ¹³C NMR, MS(ESI),元素分析和XRD确证。按改进工艺进行公斤级规模放大,产品总收率达到32.2%,化学纯度99.92%,非对映异构体纯度99.99%。     

新型2-吡啶苄基胺类罗丹明基活性小分子探针的合成

以罗丹明B和乙二胺为原料,通过缩合反应制得罗丹明酰乙二胺(1, Rhb);然后以无水THF作溶剂,化合物1与三聚氯嗪发生亲核取代反应,得到罗丹明酰乙二胺-三聚氯嗪化合物(2, Rhbc);最后在氮气氛围下,化合物2与N,N-二甲基吡啶胺反应合成了目标产物双(2 吡啶苄基) 胺罗丹明基小分子探针(3, Rhbd),其结构经¹H NMR、 IR、 HR-MS和元素分析表征。该探针可以识别Fe³⁺,检出限为30 nM。     

稀土配位聚合物荧光探针的制备及其对痕量汞离子的检测

以稀土金属铽离子为发光中心离子,鸟苷酸(GMP）为配体制备得到了能够发射绿色荧光的稀土配位聚合物。并通过加入小牛胸腺DNA溶液进一步增强荧光强度,形成“turn-on”荧光类型的稀土配合物,利用汞离子与小牛胸腺DNA的结合以及与配体GMP的相互作用使荧光猝灭,形成“turn-on-off”类型稀土荧光探针,实现了汞离子的检测。Hg2+质量浓度在50~1 200 μg·L-1范围内与体系荧光强度变化程度呈线性关系(I0-I）/I0=0.000 2C+0010 7,相关系数(r2）为0.991 5,检出限为1.5 μg·L-1,相对标准偏差(RSD)为2.3%。对河水中Hg2+进行加标回收检测,回收率为98.1%~99.8%,RSD为0.28%~1.9%。     

基于ESIPT机理香豆素荧光化合物的合成和光学性质

以3-碘苯酚为原料,经过甲酰化反应、Knoevenagel缩合反应、Sonogashira偶联和还原反应得到以香豆素为母体的目标化合物7-（甲氧基苯乙炔基）香豆素-3-甲醇(5)。化合物5的结构经过¹H NMR, ¹³C NMR和MS(ESI)分析表征确认。并对化合物5的光学性质进行了研究,结果表明：化合物5具有典型的 ESIPT 发光机理,可以构建比率计量型双光子荧光探针。      

Geometric and Electronic Behavior of C60 on PTCDA Hydrogen Bonded Network

Self-assembled supramolecular networks are promising spacer layer for electronic decoupling from the metal substrate.However,the mechanism behind of how the intrinsic electronic structure of spacer layers affects the adsorbate is still unclear.Here a hydrogen bonded network composed of n-type semiconducting molecules 3,4,9,10-perylene-tetracarboxylic-dianhydride(PTCDA)is prepared under ultra-high vacuum to serve as a spacer layer for functional organics C60 on Au(111).The geometric and electronic information of C60 was investigated by scanning tunneling microscopy and scanning tunneling spectroscopy(STM/STS)at 5 K.Effective decoupling from the metal surface yields an energy gap of 3.67 eV for C602nd,merely considering the HOMO-LUMO peak separation.The broadening of resonance peaks in STS measurements however indicates unneglected interlayer interactions in this hetero-organic system.Moreover,we scrutinize the nucleation sites of C60 on PTCDA layer and attribute this to the decreased diffusion capability on a less dense molecular arrangement possessing inhomogeneous spatial distribution of unoccupied molecular orbitals.     

Covalent Triazine Framework Nanosheets for Efficient Energy Storage and Conversion

Two-dimensional crystalline covalent triazine frameworks(CTFs) have received much attention because of their unique triazine structure, which endows CTFs with high thermal and chemical stability, high proportion of nitrogen and permanent porosity. Based on this unique structure characteristic, CTFs have shown great potential in energy storage and conversion due to the intrinsically strong conjugated structure, delocalized electron and rich active sites. However, charge carrier(electron, hole or ion) transport can't reach the deep active sites and charge diffusion was impeded by defects in bulk CTFs. Hence, to break through this barrier, increasing attention has been paid to get few layered CTFs or CTFs nanosheets in order to shorten the pathways of charge diffusion and expose more active sites. This review summarizes the synthetic methodologies of CTFs nanosheets and the potential application in photocatalytic and electrochemical energy storage and conversion.     

In situ Carbon Modification of g-C3N4 from Urea co-Crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light

An in situ strategy was introduced for synthesizing carbon modified graphitic carbon nitride(g-C₃N₄) by using urea/4-aminobenzoic acid(PABA) co-crystal(PABA@Urea) as precursor materials. Via co-calcination of the PABA co-former and the urea in PABA@Urea co-crystals, C guest species were generated and compounded into g-C₃N₄ matrix in situ by replacing the lattice N of the carbon nitride and forming carbon dots onto its layer surface. The carbon modification dramatically enhanced visible-light harvesting and charge carrier separation. Therefore, visible light photo-catalytic oxidation of methylene blue(MB) pollution in water over the carbon modified g-C₃N₄(C/g-C₃N₄) was notably improved. Up to 99% of methylene blue(MB) was eliminated within 60 min by the optimal sample prepared from the PABA@Urea co-crystal with a PABA content of 0.1%(mass ratio), faster than the degradation rate over bare g-C₃N₄. The present study demonstrates a new way to boost up the photocatalysis performance of g-C₃N₄, which holds great potential concerning the degradation of organic dyes from water.     

Colorful Silver/Carbon Nitride Composites Obtained by Photoreduction

The Ag⁺ photoreduction by graphitic carbon nitride(g-CN) materials in a high concentration of Ag⁺ solution is reported, and a series of colorful Ag/g-CN composites is prepared and characterized. The chromatic change correlates to the carbon nitride materials synthesized at different heating temperatures(CN_T, where T means heating temperature), taking advantage of the different photocatalytic activities of different CN_T. The mechanism beneath this phenomenon is attributed to two factors:the particle size of Ag NPs and the coordinate effect of Ag NPs on CN_T sheets. Interestingly, the multi-colors of Ag/g-CN composites display only on the CN_T materials synthesized from heating melamine-cyanuric acid precursor, but not on the CN_T from heating pure melamine. The color of the as-prepared Ag/g-CN composites can endure the corrosion of HNO₃ and ethanol, which shows a good chemical stability and may hint its application as chromophores.     

Expanding the Toolbox of Metal–Phenolic Networks via Enzyme‐Mediated Assembly

Functional coatings are of considerable interest because of their fundamental implications for interfacial assembly and promise for numerous applications. Universally adherent materials have recently emerged as versatile functional coatings; however, such coatings are generally limited to catechol, (ortho‐diphenol)‐containing molecules, as building blocks. Here, we report a facile, biofriendly enzyme‐mediated strategy for assembling a wide range of molecules (e.g., 14 representative molecules in this study) that do not natively have catechol moieties, including small molecules, peptides, and proteins, on various surfaces, while preserving the molecule's inherent function, such as catalysis (≈80 % retention of enzymatic activity for trypsin). Assembly is achieved by in situ conversion of monophenols into catechols via tyrosinase, where films form on surfaces via covalent and coordination cross‐linking. The resulting coatings are robust, functional (e.g., in protective coatings, biological imaging, and enzymatic catalysis), and versatile for diverse secondary surface‐confined reactions (e.g., biomineralization, metal ion chelation, and N‐hydroxysuccinimide conjugation).     

pH计检定仪期间核查方法

介绍pH计检定仪的4种期间核查方法:传递比较法、多台对比法、留样测量法、实验室间比对法。传递比较法能直接反应pH计检定仪的变化,适用于已建立pH计检定仪检定装置的单位;多台对比法与留样测量法方便、快捷,可操作性强,适合大多数单位进行pH计检定仪的期间核查;实验室间比对法对设备要求较低,但需要协调的单位较多,周期较长,费用较高,实用性差。