阳极溶出催化伏安法的理论研究 Ⅱ.不可逆电极溶出

本文对在玻璃碳电极上不可逆溶出催化的理论进行了研究,推导了溶出催化过程的电流方程,峰电流和峰电势方程,并用微计算机模拟出各种关系曲线,从理论方程得知溶出催化伏安法所得的峰电流比溶出伏安法的峰电流提高了二个数量级。本文还用钯的溶出催化实验验证理论方程,所得的实验结果均与理论方程相吻合。     

Alkyl- and aryl-substituted corroles. 4. Solvent effects on the electrochemical and spectral properties of cobalt corroles

Solvent effects on the electrochemistry and spectroscopic properties of alkyl- and aryl-substituted corroles in nonaqueous media are reported. The oxidation and reduction of six compounds containing zero to seven phenyl or substituted phenyl groups on the macrocycle were studied in four different nonaqueous solvents (CH(2)Cl(2), PhCN, THF, and pyridine) containing 0.1 M tetra-n-butylammonium perchlorate. Dimers were formed upon oxidation of all corroles in CH(2)Cl(2), but this was not the case in the other three solvents, where either monomers or dimers were formed upon oxidation depending upon the solvent Gutmann donor number and the number or location of aryl substituents on the macrocycle. The half-wave potentials were analyzed as a function of the number of aryl substituents on the macrocycle as well as the concentration of added pyridine to PhCN solutions of the compound, and these data were combined with data from the spectroelectrochemistry experiments to determine the stoichiometry of the species actually in solution after the first oxidation or first reduction of each compound. The results of these experiments indicate that reduction of the bispyridine adduct (Cor)Co(III)(py)(2) proceeds via the monopyridine complex (Cor)Co(III)(py) to give in each case the unligated cobalt(II) corrole [(Cor)Co(II)](-). In contrast, pyridine remains coordinated after electrooxidation, and the final product was characterized as [(Cor)Co(III)(py)(2)](+).     

膜富集分光光度法测定微量锌

以５－Ｂｒ－ＰＡＤＡＰ为显色剂，用ＷＸ型混合纤维素滤膜（孔径０．６５μｍ，φ２５ｍｍ）富集微量锌，用乙醇溶解富集物（Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ）分光光度法测定锌，Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ在乙醇溶液中最大吸收波长为５５５ｎｍ，表观摩尔吸光系数１．０９×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锌量在０．１～５．０μｇ／５ｍＬ，范围内符合比耳定律，本法灵敏度高，操作简便，应用于食品，水样中锌     

含氧膦结构的可溶性感光聚酰亚胺合成与表征

聚酰亚胺(PI)是一类综合性能优异的功能性材料,广泛应用于航天、航空及电子工业等领域[1].感光聚酰亚胺可以采用光刻工艺,大大简化了其应用加工程序[2,3],因而备受人们所青睐.含查尔酮结构的聚合物对UV辐射敏感度高和化学稳定性好,最近被广泛的研究和应用[4～7].主链含查尔酮结     

磷酸钡钙∶铈、锰红色荧光粉的研制

采用高温固相反应合成了磷酸钡钙∶铈、锰红色荧光粉。借助TG,XRD,荧光粉相对亮度仪、荧光分光光度仪等手段系统研究了合成过程中原料化学组成及配比、合成条件对磷酸钡钙∶铈、锰发光性能的影响。结果表明,荧光粉基质(BaxCa1-x)3(PO4)2具有畸变的Ca3(PO4)2结构。该荧光粉中Ce3+是助激活剂,Mn2+是激活剂,由Ce3+→Mn2+的能量传递使Mn2+激发产生650 nm左右的发射,当Ce3+和Mn2+浓度相等且都为0.15时,荧光粉有最高的红色发射亮度。     

Stereoselective Synthesis of (+)-Avarol, (+)-Avarone, and Some Nonracemic Analogues

Synthesis of the rearranged drimane sesquiterpenoids (+)-avarol and (+)-avarone from Wieland-Miescher ketone is described. This synthetic sequence provides convenient access to the natural enantiomers and, based on comparison of the optical rotation of synthetic avarol dimethyl ether with literature data, affords material of significantly higher optical rotation than a natural source. Similar synthetic strategies have been used to obtain several related compounds, including a decalin bearing an exocyclic olefin and a highly substituted cyclohexane, that can be viewed as hybrids of the trans-fused avarol and cis-fused arenarol skeletons.     

A NEW PEAK (T_4) IN THE ~(13)C-NMR SPECTRUM OF POLYBUTADIENE

A new peak at 39.0 ppm in the ~(13)C-NMR spectrum of polybutadiene (PBD) was discovered. This peak is assigned to the fourth peak (T_4) of trans-1,4-sequence marked with an asterisk as shown in Fig. 3 in the text.The occurrence of T_4 carbon nuclei is strongly affected by their neighboring 1,2-units. So long as both contents of trans-1,4- and 1,2-units attain their proper amounts the peak (T_4) with appear in the ~(13)C-NMR spectrum of PBD.     

冠醚配合物的研究XV.若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应

本文运用微量电导滴定及计算机拟合技术，研究了若干席夫碱及仲胺型双冠醚和碱金属离子的配位反应，测定了配合物的组成及稳定常数，并对实验结果进行了讨论。     

动态法测定耐硫甲烷化催化剂的有效导热系数

本文采用动态法原理，用单丝直径为０．２ｍｍ的铜－录铜热偶作为测温元件，在３１３－５３３Ｋ温度区间，测定了耐硫甲烷化催化剂的有地热系数。用石蜡和锡作为参比物，对所用仪器及实验方法进行了可靠性检验。实验表明，动态法是测定多孔硫化物催化剂导热系数的有效方法。其精度符合工程要求，亦能用于其它材料导热系数的测定。对所测数据用单纯形方法优化拟合，得到大于３５３Ｋ范围内的有效导热系数的经验公式。     

ICP－AES中内标法的应用研究 Ⅲ．用内标法校正基体干扰

通过观测基体对分析元素发射强度的干扰情况，分析干扰机制，从而确定用来校正基体干扰的内标元素与分析元素的匹配条件。实验结果表明，只要选择合适的内标元素，可以校正基体干扰。