Beam controller using nonlinear embedded optical transformation

Flexible and adjustable beam splitters, expanders/compressors and the cloak are presented based on a universal two-dimensional transformation formula for the embedded transformation optics. Nonlinear transformation results by the suggested formula under different conditions reveal several interesting phenomena and potential applications. All beam controllers are achieved by the nonlinear coordinate transformation.     

Influence of thermal annealing duration of buffer layer on the crystalline quality of In0.82Ga0.18As grown on InP substrate by LP-MOCVD

In_0.82Ga_0.18As epilayers were grown on InP substrates using a two-step growth technique by LP-MOCVD. A homogeneous low-temperature (450 °C) In_0.82Ga_0.18As buffer layer was introduced to improve the crystalline quality of epilayers. The influence of low-temperature buffer layer deposition condition, such as thermal annealing duration, on the crystalline quality of the In_0.82Ga_0.18As epilayer was investigated. Double-crystal X-ray diffraction measurement, Hall measurement, and Raman scattering spectrum were used to evaluate the In_0.82Ga_0.18As epilayers. Atomic force microscope was used to study the surface morphology. It is found that the In_0.82Ga_0.18As epilayer, with buffer layer thermal annealing for 5 min, exhibits the best crystalline quality. The change of the surface morphology of the buffer layer after thermal annealing treatment was suggested to explain the phenomenon.     

Photonic gap vanishing in one-dimensional photonic crystals with single-negative metamaterials

The properties of photonic band gap in one-dimensional photonic crystals composed of single-negative metamaterials are studied theoretically. Our study shows that the photonic gap will vanish at a certain incident angle when both the phase-match and impedance-match conditions are satisfied simultaneously, suggesting that the bandwidth and location of the photonic gap are strongly dependent on the incident angle and polarization. However, the photonic gap will not vanish and may become insensitive to the incident angle when the two match conditions cannot be met. Our study also shows that losses in metamaterials have little effect on the properties of the photonic gap.     

亚波长金属线栅的设计、制备及偏振成像实验研究

针对红外偏振成像系统,运用等效介质理论,在氟化钙基底上设计了周期为200 nm,深度为100 nm的金属铝栅.模拟计算结果表明,设计的金属铝栅在中红外(3—5 μm)和远红外(8—12 μm)双波段范围内,以及±20°的视场范围内能够提供大于35dB的消光比.利用电子束曝光、反应离子束刻蚀、等离子去胶等工艺完成了金属铝栅的制作.将金属铝栅放在中波红外热像仪前,得到了目标轮廓清晰的偏振图像. 关键词： 亚波长衍射光栅 偏振成像 等效介质理论     

Z箍缩驱动器与丝阵负载耦合特性研究

以丝阵内爆零维模型为基础,采用Pspice模拟行为建模方法,建立了丝阵内爆动态电感与Z箍缩驱动器耦合的全电路模型,实现驱动器放电过程与丝阵内爆过程的自洽求解,并研究了丝阵参数、电路参数对内爆过程的影响.结果表明:丝阵负载与驱动器存在强耦合关系,丝阵参数、电路参数对丝阵峰值箍缩电流、内爆时间、内爆动能影响很大;在驱动器参数不变,内爆时间不超过电路固有放电周期1/4的前提下,峰值箍缩电流、内爆时间、内爆动能随丝阵质量的增加而增大,内爆时间随丝阵初始半径的增加而增大;在丝阵参数不变时,随着驱动器等效电容的增大,内爆时间减小,丝阵内爆动能增大,但驱动器储能转化为内爆动能的效率却先增大后减小.对于特定的驱动器,优化的丝阵参数应使内爆过程充分利用驱动器固有放电周期的上升沿,使丝阵快速收缩的时间起点接近电路固有放电周期的四分之一,以获得最大的动能效率. 关键词： Z箍缩驱动器 零维内爆模型 模拟行为建模 耦合特性     

非晶氧化钛薄膜形成过程中钛离子能量对表面结构影响的机理

研究了非晶氧化钛薄膜沉积过程中入射钛离子能量对表面结构形成机理以及薄膜特性的影响.模拟结果表明,通过提高入射钛离子能量,可以有效降低成膜表面粗糙度,从而减小薄膜表面的光学散射损耗.研究发现,当入射离子能量提高后,薄膜生长模式从"岛"状生长过渡到了"层"状生长,且离子入射点附近的平均扩散系数也有显著增加,这有利于形成更加平整的高质量薄膜表面.     

紫外可见光谱的水产养殖水体有机物浓度快速检测研究

应用紫外可见（ultraviolet/visible,UV/Vis）光谱技术对表征水产养殖水体中有机物浓度的指标化学需氧量（chemical oxygen demand,COD）进行快速测量,对采集到的135份甲鱼养殖水样进行UV/Vis波段全光谱扫描,采用无信息变量消除（uninformative variable elimination,UVE）和连续投影算法（successive projections algorithm,SPA）相结合的变量选择算法选取全波段光谱中的特征波长,从201个UV/Vis光谱变量中选取了7个特征波长,只占全波段光谱变量的3.48%,降低了建模的时间和模型的复杂度。结合最小二乘支持向量机（least-square support vector machine,LS-SVM）算法进行COD预测建模,结果表明：使用特征波长建模的预测效果（相关系数r（correlation coefficient）=0.89,预测均方根误差（root mean square error of prediction,RMSEP）=15.46 mg·L-1）好于使用全波段光谱建模的预测效果（r=0.88,RMSEP = 15.71 mg·L-1）。使用UVE-SPA变量选择算法获取UV/Vis光谱特征波长,结合LS-SVM建模,可以快速、准确的测量水产养殖水体中的COD浓度,为进一步实现水产养殖水质的在线检测以及其他水质参数的快速测定奠定了基础。     

非等电子Sb替换Cu和Te后黄铜矿结构半导体Cu_3Ga_5Te_9的热电性能

热电材料是一类能够实现热与电相互转换的功能材料,在制冷和发电领域极具应用潜力.本文采用金属Sb元素非等电子替换Cu3Ga5Te9化学式中的Cu和Te,观察到材料Seebeck系数和电导率提升的现象.这些电学性能的改善与载流子浓度和有效质量的增大及迁移率基本维持不变有关.载流子浓度的提高是由于Sb原子占位在Te晶格位置后费米能级进入到价带所产生的空穴掺杂效应所致,同时也与Cu含量减少后铜空位(V-1Cu)浓度增大相关联.另外,非等电子替换后,阴离子(Te2-)移位导致了晶格结构缺陷参数u和η的改变,其改变量fiu和fiη与材料晶格热导率(κL)的变化密切相关.在766 K时,适量的Sb替换量使材料的最大热电优值(ZT)达到0.6,比Cu3Ga5Te9提高了近25%.因此,通过选择替换元素、被替换元素及替换量有效地调控了材料的电学及热学性能,在黄铜矿结构半导体中实现了非等电子元素替换改善热电性能的思想.     

不同算法原子电荷下的~1J_(CH)理论计算

用一种计算直接键连原子核自旋耦合常数的半经验公式,结合量子化学计算得到的32种有机分子稳定几何构型的7种不同算法下的原子电荷,探究原子电荷算法的不同对1JCH理论计算的影响,拟合出基于7种原子电荷的耦合常数计算公式,并利用拟合公式对5种分子进行了检验.计算结果表明拟合的32种分子及检验的5种分子的耦合常数的计算值均与实验值较好的符合,拟合得到的基于7种原子电荷的计算公式均可以对其他分子体系的耦合常数进行预测.另外,计算结果同样显示原子电荷算法的不同对1JCH理论计算值有一定的影响却不显著,其中基于电荷均衡方法电荷(QEq)得出的耦合常数计算值与实验值的偏差较其它6种原子电荷的小,结果更可靠.     

One-step synthesis of Fe3O4@C/reduced-graphite oxide nanocomposites for high-performance lithium ion batteries

In this paper, we propose a facile one-step strategy to prepare Fe₃O₄@amorphous carbon/reduced graphite oxide nanocomposites (FCRGs) under hydrothermal conditions. A transmission electron microscopy image has shown that the as-formed Fe₃O₄ nanoparticles coated with a layer of amorphous carbon are wrapped by reduced graphite oxide (r-GO) sheets. The diameter of Fe₃O₄ nanoparticles is less than 50 nm. N₂ adsorption/desorption isotherms indicate that the specific surface area of FCRG is 31.6 m²/g with porous structure. FCRG exhibits improved cycling stability and rate performances as a potential anode material for high-performance lithium ion batteries.