Control of an ultrasonic transducer to realize low speed driven

This paper deals with the control of a transducer to realize low speed. A new PWM control is proposed to fit the transducer. By this control method, the transducer is directly excited by pulses whose width can be modulated. The noise induced by conventional PWM control is eliminated and the motor works more steadily and more quietly. Instead of the general method of decreasing vibrating amplitude of ultrasonic motor to realize low speed, in this paper, two fast contrary elliptical vibrations of the transducer's two Langevin vibrators are excited to restrain skip-slip influence on ultrasonic motor's low speed performance and the driven is realized by the difference of the two vibrators' vibrating amplitudes. Experiments had been carried out by driving an aerostatic guide and fuzzy control is applied. The controlled speed reached 0.1 mm/s.     

The evolution of the cavitation bubble driven by different sound pressure

In this paper, the relation between the ambient radius R(0) of the acoustic cavitation bubble and its driving pressure was investigated by an improved method. The evolution of the bubble was gained with a long-distance microscope and a bundle of 532 nm laser switched by an acousto-optic modulator. The ambient radius R(0) was determined by fitting the numerical calculation based on Rayleigh-Plesset equation to the experimental data. The results showed that as the sound pressure increased R(0) decreased at beginning and increased after the pressure reached to about 1.2 atm. Although the same rule was gotten from the relation between the maximum radius R(m) and the sound pressure, the ratio R(m)/R(0) varied monotonously with the sound pressure. It indicates that enhancing the sound pressure can increase the compression ratio of the bubble even if the mass inside the bubble is also increased.     

Tomography of injection and acceleration of monoenergetic electrons in a laser-wakefield accelerator

A tomographic diagnosis method was developed to systematically resolve the injection and acceleration processes of a monoenergetic electron beam in a laser-wakefield accelerator. It was found that all the monoenergetic electrons are injected at the same location in the plasma column and accelerated from 5 to 55 MeV energy in 200 microm distance. This is a direct measurement of the real acceleration gradient in a laser-wakefield accelerator, and the experimental data are consistent with the model of transverse wave breaking and beam loading for monoenergetic electron injection.     

富营养化水体环境中COD浓度遥感监测系统设计

对富营养化水体环境中COD浓度进行遥感监测,可以预防富营养化水体环境中COD浓度增加,提高水体水质,增加水循环次数,减少水体中有机物的污染。当前富营养化水体环境中COD浓度遥感监测系统设计方法,以Modis遥感影像数据为原理,依据富营养化水体环境中COD浓度的特征提取结果,对富营养化水体环境中COD浓度进行遥感监测,没有具体对遥感监测系统进行详细地设计,无法获取富营养化水体环境中COD浓度高精度的遥感监测信息,存在遥感监测结果偏差大的问题。提出了一种基于Zigbee的富营养化水体环境中COD浓度遥感监测系统设计方法。该方法先对Zigbee的富营养化水体环境中COD浓度遥感监测系统进行硬件设计,采用IMF对富营养化水体环境中COD浓度进行特征提取,以特征提取结果为基础,依据COD浓度指数时间序列实现富营养化水体环境中COD浓度遥感监测,最后利用Retinex法对COD浓度遥感监测的图像进行处理,完成对富营养化水体环境中COD浓度的遥感监测。仿真实验结果证明,所提系统设计方法可以精确地对富营养化水体环境中COD浓度进行安全快速的遥感监测。     

CH3CHF2与VO2+的反应机理

采用密度泛函方法在B3LYP/ 6-311G (2d, p)水平上研究了CH3CHF2与VO2+反应生成CH2=CF2 (H2消除反应), CH2=CHF(HF消除反应)和CH3CFO的机理。计算结果表明以上三种反应中,H2消除反应最容易发生。计算结果证明了相邻碳原子上的氢原子有利于C-F键的断裂。     

用于飞秒时间分辨分子反应动力学研究的千赫兹离子/电子速度成像仪

A new velocity map imaging spectrometer is constructed for molecular reaction dynamics studies using time-resolved photoelectron/ion spectroscopy method.By combining a kHz pulsed valve and an ICCD camera,this velocity map imaging spectrometer can be run at a repetition rate of 1 kHz,totally compatible with the fs Ti:Sapphire laser system,facilitating time-resolved studies in gas phase which are usually time-consuming.Time-resolved velocity map imaging study of NH₃ photodissociation at 200 nm was performed and the time-resolved total kinetic energy release spectrum of H+NH₂ products provides rich information about the dissociation dynamics of NH₃.These results show that this new apparatus is a powerful tool for investigating the molecular reaction dynamics using time-resolved methods.     

LCC谐振变换器的优化设计与实现

LCC谐振变换器是电除尘高频高压电源的核心器件,十分适用于高压大功率场合,针对连续模式应用于电除尘高频高压电源的不足,采用LCC谐振变换器断续模式进行优化设计。分析了带RC负载的LCC谐振变换器断续模式(简称DCM)的工作原理及拓扑结构,采用状态空间法推导了其数学模型,研究并建立了新颖的LCC谐振变换器断续模式下的损耗模型。在此基础上提出了一种基于遗传粒子群算法的LCC谐振变换器优化设计方法,该方法直观并且准确,实现了软开关技术,提高了电源的工作效率。并在现场通过一台72KV/85KW的电除尘高频高压电源样机验证了本文的正确性。     

卫星姿轨控半物理仿真测试系统

为了保证卫星发射前的地面姿轨控半物理试验的顺利进行,研制了姿轨控分系统半物理仿真地面测试系统。为了满足相关类似卫星型号的通用化测试,本套仿真测试系统采用通用模块化的设计架构,同时采用现今主流的PXI总线测试技术（配合VPC转接电路板）。使用标准通用cPCI总线板卡以及部分自制FPGA可编程cPCI总线板卡实现各测试模块的功能。这种架构不仅能实现功能模块化,便于后续的功能扩展及维修,同时具有可靠性高、搭建时间快、可维护性强的优点,且体积小,稳定性强,能适应不同测试对象的测试环境条件,适合长途运输。本文介绍了系统的总体设计结构,重点介绍了模拟总体电源、动力学仿真机、电信号源、程序加载以及外围设备等硬件系统功能,以及相关配套软件的基本功能。测试系统经过与卫星的星地联试,功能性及使用性均得到了验证,测试结论符合设计之初功能性及通用化的构想。