The triplet channel in the photodissociation of ozone in the Hartley band: classical trajectory surface hopping analysis

The triplet channel in the photodissociation of ozone in the Hartley band, O3 + hv-->O(3P) + O2(3sigma), is investigated by means of a classical trajectory surface hopping method using ab initio diabatic potential energy surfaces for the B and the R states. Because of the strong recoil in the R state along the breaking O-O bond, O2(3sigma) is produced with a high rotational energy. The nonadiabatic transition probability depends markedly on the coordinate along the crossing seam. As a consequence a unique correlation is found between the internuclear geometry at the crossing and the final vibrational state of O2(3sigma). The calculated distribution of the translational energy is in good accord with the measured distribution.     

Collective and individual plasmon resonances in nanoparticle films obtained by spin-assisted layer-by-layer assembly

Nanoscale uniform films containing gold nanoparticle and polyelectrolyte multilayer structures were fabricated by the using spin-assembly or spin-assisted layer-by-layer (SA-LbL) deposition technique. These SA-LbL films with a general formula [Au/(PAH-PSS)nPAH]m possessed a well-organized microstructure with uniform surface morphology and high surface quality at a large scale (tens of micrometers across). Plasmon resonance peaks from isolated nanoparticles and interparticle interactions were revealed in the UV-visible extinction spectra of the SA-LbL films. All films showed the strong extinction peak in the region of 510-550 nm, which is due to the plasmon resonance of the individual gold nanoparticles redshifted because of a local dielectric environment. For films with sufficient density of gold nanoparticles within the layers, the second strong peak was consistently observed between 620 and 660 nm, which is the collective plasmon resonance from intralayer interparticle coupling. Finally, we suggested that, for certain film designs, interlayer interparticle resonance might be revealed as an independent contribution at 800 nm in UV-visible spectra. The observation of independent and concurrent individual, intralayer, and interlayer plasmon resonances can be critical for sensing applications, which involve monitoring of optomechanical properties of ultrathin optically active compliant membranes.     

星形支化聚苯乙烯模型化合物的合成及表征

本文用阴离子聚合方法,首先合成了线形‘活’的聚苯乙烯大分子阴离子,然后用二乙烯基苯为偶联成核剂,制备了十三个4-80臂较窄分子量分布的等臂长规则星形支化聚苯乙烯的模型化合物,并用GPC—粘度计联用装置对之进行了表征。     

Synthesis and Magnetic Properties of Binuclear Mn（Ⅱ）Complexes with Alkoxide Bridge

ＳｙｎｔｈｅｓｉｓａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＢｉｎｕｃｌｅａｒＭｎ（Ⅱ）ＣｏｍｐｌｅｘｅｓｗｉｔｈＡｌｋｏｘｉｄｅＢｒｉｄｇｅＹａｎＳｈｉ－ｐｉｎｇ；ＦａｎＢｏ；ＬｉａｏＤａｉ－ｚｈｅｎｇ；ＪｉａｎｇＺｏｎｇ－ｈｕｉａｎｄＷａｎｇ...     

氯过氧化物酶的手性催化活性在有机合成中的应用

氯过氧化物酶（CPO）作为过氧化物酶家族中的一员对多种有机底物表现出了广泛的催化活性。自上世纪60年代被发现以来，CPO在有机合成中的应用一直是一个研究热点。它作为一种生物催化剂能催化广泛的底物合成手性化合物，且有高的产率和高的对映选择率。本文综述了氯过氧化物酶在手性有机合成中的应用，重点关注了卤化、醇氧化、羟基化、环氧化、磺化氧化等反应，并讨论了目前在该领域所面临的问题及今后的发展趋势。     

Determination of binding sites in carboplatin-bound cytochrome c using electrospray ionization mass spectrometry and tandem mass spectrometry

Interaction of carboplatin with cytochrome c (Cyt. c) has been investigated by electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (MS/MS). ESI-MS studies revealed that the ring-opened adducts of carboplatin with Cyt. c were formed in the stoichiometric ratio of 1:1 and 2:1 at pH 5.0 and 37 degrees C and in the stoichiometric ratio of 1:1 only at pH 7.0 and 37 degrees C. It was also found that Cyt. c could be cleaved by carboplatin at pH 2.5 and 50 degrees C. The cleaved fragments of Cyt. c were determined by ESI-MS and MS/MS analysis to be Glu66 approximately Met80, Ac-Gly01 approximately Met65, Glu66 approximately Glu104, Ac-Gly01 approximately Met80 and Ile81 approximately Glu104. The carboplatin prefers to anchor to Met65 first, then to Met80. To further confirm the binding site of Met, AcMet-Gly was used as the model molecule to investigate its interaction with carboplatin and its hydrolysis reaction. On the basis of species detected during the reaction monitored by ESI-MS, a possible pathway of the cleavage reaction was proposed.     

YbB6的能带结构和光电导率谱的解析

用密度泛函（GGA＋U）方法研究YbB6晶体的电子结构。采用FLAPW方法进行计算,获得了比较精确的能带结构信息。分析了YbB6能带结构的特征与Yb-B6簇间成键情况的联系。在此基础上计算YbB6的反射率、介电函数、光电导率和能量损失函数等光学常数,结果与实验值符合比较好。对其光电导率（实部）和能量损失函数谱进行详细分析,对谱峰作出指认,阐明了各谱峰与能带间电子跃迁的联系,证实了前人对谱峰所作经验指认的合理部分,补充和纠正了前人经验指认的不足和不准确之处。     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.     

SHAPE MEMORY EFFECT OF PU IONOMERS WITH IONIC GROUPS ON HARD-SEGMENTS

SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.     

Crystal Structure of a Supramolecular Complex Formed between 1-bromo-2-iodo-tetrafluoroethane and N,N,N′,N′-tetramethyl-ethylenediamine

X-ray analysis has revealed that N,N,N′,N′-tetramethyl-ethylenediamine 1 form donor–acceptor complex 3 with 1-bromo-2-iodo-tetrafluoroethane 2, in which the N X (X = Br, I) distances are longer than the average covalent bond length between X and N, but are also definitively shorter than the sum of the corresponding van der Waals radii of X and N, thus that indicating weak interactions between the nitrogen and bromine or iodine atoms. In our experimental section, a valuable method for recrystallization and collect X-ray data from crystals that easily exhibit decay and can be cracked is reported.