Stainless steel modified with poly(ethylene glycol) can prevent protein adsorption but not bacterial adhesion

The surface of AISI 316 grade stainless steel (SS) was modified with a layer of poly(ethylene glycol) (PEG) (molecular weight 5000) with the aim of preventing protein adsorption and bacterial adhesion. Model SS substrates were first modified to introduce a very high density of reactive amine groups by the adsorption of branched poly(ethylenimine) (PEI) from water. Methoxy-terminated aldehyde-poly(ethylene glycol) (M-PEG-CHO) was then grafted onto the PEI layers using reductive amination at the lower critical solution temperature (LCST) of the PEG in order to optimize the graft density of the linear PEG chains. The chemical composition and uniformity of the surfaces were determined using X-ray photoelectron spectroscopy (XPS) and time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) in the imaging mode. The effects of PEI concentration and different substrate pre-cleaning methods on the structure and stability of the final PEG layer was examined. Piranha solution proved to be the most effective method for removing adventitious hydrocarbon contamination, compared to cleaning with ultrasonication in organic solvents, and was the SS substrate that produced the most stable and thickest PEI layer. The surface density of PEI was shown to increase with increasing PEI concentration (up to 30 mg/ml), as determined from XPS measurements, and subsequently produced the PEG layer with the highest density of attached chains. In model experiments using β-lactoglobulin no protein adsorption was detected on the optimized PEG surface as determined by XPS and ToF-SSIMS analysis. However, neither the adhesion of a Gram-negative (Pseudomonas sp.) nor a Gram-positive (Listeria monocytogenes) bacterium was affected by the coating as equal numbers adhered to all surfaces tested. Our results show that preventing protein adsorption is not a prerequisite stopping bacterial adhesion, and that other mechanisms most likely play a role.     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Synthesis,crystal structure and two-photon property studies on a series of complexes derived from a novel Schiff base ligand

A new Schiff base ligand derived from S-benzyldithiocarbazate and 4-[N-hydroxy ethyl-N-(methyl)amino]benzaldehyde (HL, where H is a dissociable proton) and its Ni^II, Cu^II, Zn^II and Pd^II complexes were prepared and fully characterized. The structures of HL and Ni(L)₂ were determined by X-ray diffraction analysis, which revealed that the geometry of the Ni^II ion is square-planar with two equivalent Ni=N and Ni=S bonds, and that the two neighboring molecules in two layers have weak contact. The electronic spectra and solution fluorescence of the ligand and the complexes were studied, and the quantum yields of single-photon fluorescence for the compounds were determined. The compounds possess two-photon absorption (t.p.a.) character and the t.p.a. coefficient and t.p.a. cross-section were determined by the Z-scan technique. Especially, the Zn(L)₂complex and the HL ligand exhibit intensive two-photon fluorescence (t.p.f.) at 800 nm laser pulses in the femtosecond regime.     

Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.     

Chiral metallacyclophanes: self-assembly, characterization, and application in asymmetric catalysis

[structure: see text] A family of chiral metallacyclophanes has been readily assembled based on robust Pt-acetylide linkage and characterized by a variety of spectroscopic techniques and X-ray crystallography. The steric congestion around the chiral dihydroxy groups in rigid metallacyclophane 4 prevents their reactions with Ti(O(i)()Pr)(4) to form active catalysts for enantioselective diethylzinc additions to aromatic aldehydes. In contrast, chiral dihydroxy groups in more flexible unclosed metallacyclophane 5 are effective ligands for enantioselective catalytic diethylzinc additions to aromatic aldehydes.     

The Mutual Conversion of CO2 and CO in Dielectric Barrier Discharge (DBD)

Non-equilibrium plasma, which was engendered by dielectric barrier discharge (DBD) was used to analyze the mutual conversion between CO₂ and CO. The results showed that the conversion ratio of CO increased monotonously with the increasing voltage. But CO₂ was not so. Its conversion ratio reached maximum when the voltage was 3600 V in Ar system. It also showed that the existence of water molecules was more advanageous for the conversion of CO to CO₂ in Air system than in oxygen system, and the conversion ratio could reach 75.8% when the relative humidity was 100%. We also discussed the energy yield and energy efficiency, and the result was that high voltage and high concentration of reactant was disadvantageous for energy utilization.     

The first mu3-oxalato-bridged copper complex with tridentate Schiff base ligand N-ethyl-N'-salicylidene-1,2-diaminoethane: synthesis,structure, and magnetic properties

The first mu(3)-oxalato-bridged copper(II) complex, [[Cu(3)(L)(3)(mu(3)-C(2)O(4))][Cu(L)(H(2)O)](ClO(4))(2)] x 0.5(H(2)O) x 0.5(CH(3)OH), where HL = N-ethyl-N'-salicylidene-1,2-diaminoethane, has been synthesized and characterized by variable-temperature magnetic susceptibility measurement. The complex exhibits ferromagnetic coupling between the oxalato-bridged copper atoms and antiferromagnetic coupling between the oxygen-bridged copper atoms.     

Liquid–liquid equilibria for the quaternary system methyl isobutyl ketone–water–phenol–hydroquinone

Liquid–liquid equilibria data of the quaternary system methyl isobutyl ketone (MIBK)–water–phenol–hydroquinone were measured at 25 °C under atmosphere pressure. The experimental data were correlated with the UNIQUAC and NRTL activity coefficient models on the base of the fixed binary interaction parameters that were obtained from two sub-ternary systems MIBK–water–phenol and MIBK–water–hydroquinone. The root mean square deviations (RMSD) show that the regressed results for the quaternary system were in good agreement with the experimental data for both UNIQUAC and NRTL models. The comparison between experimental and calculated distribution coefficient values of phenol and hydroquinone shows that a relative deviation of less than 5% is obtained.     

Formation and structure of a novel enediyne-RNA base covalent adduct

The structure of an unusual covalent adduct formed by thiol-activated neocarzinostatin chromophore (NCS-chrom) and a RNA-DNA hybrid having an overhang of four unpaired residues at the 3'-end of the RNA strand has been elucidated by MS and NMR spectroscopic analyses. Unlike previously characterized adducts formed by NCS-chrom on the sugar residue of the DNA target, this adduct has been found to be on one of the uracil bases in the RNA overhang. Covalent linkage is between C-6 of the post-activated NCS-chrom and C-5 of the uracil. A novel mechanism involving adduction of the NCS-chrom C-6 radical, generated by 2-mercaptoethanol activation, to C-5 of the uracil at the U9 position of the RNA 11-mer, oxidation by dioxygen, reduction by the thiol, and subsequent dehydration is proposed for adduct formation.     

Hybrid polymerization of iso-butyl vinyl ether

The radiation-induced hybrid polymerization in the presence of the N-alkoxypyridinium salt having relatively stable nonnucleophilic anion (PF₆⁻) has been investigated in the paper. Based on the analysis of experimental data and the GPC spectrum, the onium salts not only oxidize -alkoxyalkyl radicals, produced from IBVE in dichloromethane by irradiation, to the corresponding cations, but also give nonnucleophilic anions PF₆⁻ for the polymerization system. The experimental results clearly demonstrate that free radical and cationic polymerization mechanisms occurred simultaneously in IBVE/EMP⁺PF₆⁻/CH₂Cl₂ systems on irradiation with γ-ray.