聚合物纳米复合电介质

聚合物纳米复合材料能够发挥纳米材料在电、磁、光等方面的优越性,也具有聚合物的易成型等方面的优点,正成为电介质领域研究的热点.本文综述了聚合物纳米复合材料在介电性能方面的研究概况,主要涉及了电导、介电强度与空间电荷、介电常数、介电损耗以及局部放电等方面的研究.最后展望了今后的研究方向.     

Chains, ladders and sheets of d metal–organic polymers generated from the flexible bipyridyl ligands

By use of the three-layer diffusion method, reactions of flexible bipyridyl ligands (4,4′-bpp or 3,3′-bpp) with M(II) salts (M = Zn, Cd) and multi-carboxylate ligands resulted in the formation of four interesting d¹⁰ metal–organic coordination polymers: [Zn(μ-4,4′-bpp)Br₂]_n (1), [Zn(μ-4,4′-bpp)(1,2-bdc)]_n · nH₂O (2), [Zn(μ-3,3′-bpp)(1,3-bdc)]_n · nCH₃OH · 2nH₂O (3) and [Cd(μ-3,3′-bpp)(C₄H₂O₄)]_n · 3nH₂O (4) (4,4′-bpp = 2,2′-bis(4-pyridylmethyleneoxy)-1,1′-biphenylene; 3,3′-bpp = 2,2 ′-bis(3-pyridylmethyleneoxy)-1,1′-biphenylene; bdc=benzenedicarboxylate, C₄H₄O₄ = fumaric acid). Complex 1 has a 2D sheet structure consisting of two unusual zigzag Zn(II) chains which are nearly perpendicular to each other. Complex 2 is comprised of two-leg ladders, in which [Zn(4,4′-bpp)] chains serve as the side rails and 1,2-bdc ligands serve as the cross rungs. In complex 3, every two 1,3-bdc ligands connect the neighbouring Zn(II)-3,3′-bpp dimetallic rings in η¹ coordination modes into an interesting chain structure. Complex 4 consists of an anionic macrocycle-containing cadmium dicarboxylate sheets that are separated by 3,3′-bpp. These d¹⁰ metal complexes exhibit high thermal stabilities and strong luminescence efficiencies.     

Nonequilibrium hollow-fiber liquid-phase microextraction with in situ derivatization for the measurement of triclosan in aqueous samples by gas chromatography–mass spectrometry

Hollow-fiber liquid-phase microextraction (HF-LPME), a relatively new sample preparation technique, has attracted much interest in the field of environmental analysis. In the current study, a novel method based on hollow-fiber liquid-phase microextraction with in situ derivatization and gas chromatography–mass spectrometry for the measurement of triclosan in aqueous samples is described. Hollow-fiber liquid-phase microextraction conditions such as the type of extraction solvent, the stirring rate, the volume of derivatizing reagent, and the extraction time were investigated. When the conditions had been optimized, the linear range was found to be 0.05–100 μg l⁻¹ for triclosan, and the limit of detection to be 0.02 μg l⁻¹. Tap water and surface water samples collected from our laboratory and Wohushan reservoir, respectively, were successfully analyzed using the proposed method. The recoveries from the spiked water samples were 83.6 and 114.1%, respectively; and the relative standard deviation (RSD) at the 1.0 μg l⁻¹ level was 6.9%.     

Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.     

Syntheses, crystal structures and magnetic properties of a new nitronyl nitroxide NIT2-bithph and its manganese(II) compound [Mn(hfac)2(IMHBithph)]2·(NIT2-bithph)(C6H14)

A new nitronyl nitroxide NIT2-bithph (1) and its manganese(II) compound [Mn(hfac)₂(IMHBithph)]₂·(NIT2-bithph)(C₆H₁₄) (2) (hfac = hexafluoroacetylacetonate; NIT2-bithph = 4,4,5,5-tetramethyl-2-(bithiophenal-2-yl)imidazoline-1-oxyl-3-oxide; IMHBithph = 1-hydroxy-2-bithiophenal-4,4,5,5-tetramethyl-4,5-dihydro- 1H-imidazole) have been synthesized and structurally characterized by X-ray diffraction methods. The units of compound 1 were connected as one-dimensional chain by the intermolecular hydrogen bonds which afford an intermolecular antiferromagnetic interaction between nitronyl nitroxide radicals within the chain (J = −1.89 cm⁻¹). Compound 2 resulting from the reaction of Mn(hfac)₂·2H₂O and NIT2-bithph is dinuclear and includes the reduced amidino-oxide form of NIT2-bithph, it is made up of three parts: a [Mn(hfac)₂(IMHBithph)]₂ dimer unit, an uncoordinated NIT2-bithph radical and a noncoordinated solvent molecule of hexane, the molecule of radical is hydrogen bonded to its reduced form. Two reduced IMHBithph ligands bridge the two manganese(II) ions through their amidino-oxide oxygen atoms resulting in a small intramolecular antiferromagnetic interaction between the manganese ions (J = −1.55 cm⁻¹).     

Phase relationships in the BaO-Ga2O3-Ta2O5 system and the structure of Ba6Ga21TaO40

Phase relationships in the BaO-Ga(2)O(3)-Ta(2)O(5) ternary system at 1200 °C were determined. The A(6)B(10)O(30) tetragonal tungsten bronze (TTB) related solution in the BaO-Ta(2)O(5) subsystem dissolved up to ~11 mol % Ga(2)O(3), forming a ternary trapezoid-shaped TTB-related solid solution region defined by the BaTa(2)O(6), Ba(1.1)Ta(5)O(13.6), Ba(1.58)Ga(0.92)Ta(4.08)O(13.16), and Ba(6)GaTa(9)O(30) compositions in the BaO-Ga(2)O(3)-Ta(2)O(5) system. Two ternary phases Ba(6)Ga(21)TaO(40) and eight-layer twinned hexagonal perovskite solid solution Ba(8)Ga(4-x)Ta(4+0.6x)O(24) were confirmed in the BaO-Ga(2)O(3)-Ta(2)O(5) system. Ba(6)Ga(21)TaO(40) crystallized in a monoclinic cell of a = 15.9130(2) ?, b = 11.7309(1) ?, c = 5.13593(6) ?, β = 107.7893(9)°, and Z = 1 in space group C2/m. The structure of Ba(6)Ga(21)TaO(40) was solved by the charge flipping method, and it represents a three-dimensional (3D) mixed GaO(4) tetrahedral and GaO(6)/TaO(6) octahedral framework, forming mixed 1D 5/6-fold tunnels that accommodate the Ba cations along the c axis. The electrical property of Ba(6)Ga(21)TaO(40) was characterized by using ac impedance spectroscopy.     

Photoinduced hydrogen evolution in supramolecular devices with a rhenium photosensitizer linked to FeFe-hydrogenase model complexes

Coordination of the pyridyl-attached diiron azadithiolate hexacarbonyl complexes (2 and 3) through the pyridyl nitrogen to the Re on 10-phenanthroline rhenium (5a) and 2,9-diphenyl-1,10-phenanthroline rhenium (5b) forms novel [Re-Fe] complexes 7a, 7b and 8 respectively. Under visible light illumination using triethylamine as a sacrificial electron donor and [Re-Fe] type complexes (7a, 7b or 8) as catalysts, remarkably increased efficiency was observed for photoinduced hydrogen production with a turnover number reaching 11.8 from complex 7a and 8.75 from 7b. To the best of our knowledge, these are the best values compared to other [Re-Fe] photocatalysts reported so far. In contrast to the parent molecules, the turnover number by the intermolecular combination of complexes 6a and 2 showed a value of 5.23, and that from 6b and 2 is 3.8, while no H(2) was detected from 8a and 3 under the same experimental conditions. Obviously, the intramolecular combination of rhenium(I) and [2Fe2S] as a catalyst is promising for efficient H(2) evolution, and it is better than the intermolecular multi-component system.     

Aggregation Pathways of the Amyloid β(1-42) Peptide Depend on Its Colloidal Stability and Ordered β-Sheet Stacking

Amyloid β (Aβ) fibrils are present as a major component in senile plaques, the hallmark of Alzheimer's disease (AD). Diffuse plaques (nonfibrous, loosely packed Aβ aggregates) containing amorphous Aβ aggregates are also formed in brain. This work examines the influence of Cu(2+) complexation by Aβ on the aggregation process in the context of charge and structural variations. Changes in the surface charges of Aβ molecules due to Cu(2+) binding, measured with a ζ-potential measurement device, were correlated with the aggregate morphologies examined by atomic force microscopy. As a result of the charge variation, the "colloid-like" stability of the aggregation intermediates, which is essential to the fibrillation process, is affected. Consequently, Cu(2+) enhances the amorphous aggregate formation. By monitoring variations in the secondary structures with circular dichroism spectroscopy, a direct transformation from the unstructured conformation to the β-sheet structure was observed for all types of aggregates observed (oligomers, fibrils, and/or amorphous aggregates). Compared to the Aβ aggregation pathway in the absence of Cu(2+) and taking other factors affecting Aβ aggregation (i.e., pH and temperature) into account, our investigation indicates that formations of amorphous and fibrous aggregates diverge from the same β-sheet-containing partially folded intermediate. This study suggests that the hydrophilic domain of Aβ also plays a role in the Aβ aggregation process. A kinetic model was proposed to account for the effects of the Cu(2+) binding on these two aggregation pathways in terms of charge and structural variations.     

火焰原子吸收光谱法间接测定青霉素V钾

基于青霉素V钾在酸性条件下的水解产物可与Pb2 + 形成沉淀 ,用火焰原子吸收光谱法测定沉淀中铅的含量 ,可间接测定药片中青霉素V钾的含量。在优化条件下 ,测定青霉素V钾的线性范围为 5 .15× 10 -5～ 4 .12× 10 -4mol/L ,线性回归方程为A =2 .4 2× 10 3 c - 0 .0 6 3 1,相关系数为 0 .999 1,检出限为 7.392× 10 -7mol/L ,测定结果的相对标准偏差为 0 .0 6 %～ 0 .6 9% ,回收率为 97.8%～ 10 2 .0 %。     

有机大分子导向无机纳米粒子的分级有序自组装

本文主要综述了基于特定分子设计的有机大分子导向下的无机纳米粒子的分级有序自组装.可以有效导向无机纳米粒子组织的有机大分子主要包括合成大分子和生物大分子,前者如具有氢键识别功能的大分子、聚电解质、嵌段大分子、树枝状大分子;后者如DNA、糖类以及蛋白质.所涉及的无机纳米粒子通常需要通过单层修饰使之与特定的大分子具有识别功能,或者设计表面带有正或负电荷使之与带有负或正电荷的大分子相互识别.该领域的研究在先进功能材料及仿生材料方面具有重要意义.