Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

用多焦点全息透镜实现多重谱分数傅里叶变换

提出用多焦点全息透镜实现多重谱分数傅里叶变换.利用全息方法通过一次曝光制作出多焦点的全息透镜,分析了用此全息元件实现这种变换的条件,并在实验上实现了多重谱分数傅里叶变换. 实验结果表明这种变换方法简便可行,可广泛应用于多通道光学信息处理系统及多目标图像识别系统中.     

Tunneling Radiation of a Torus-Like Black Hole in Anti-de Sitter Space-Time

An extension of the Parikh-Wilczek's semi-classical quantum tunneling method, the tunneling radiation of the charged particle from a torus-like black hole is investigated. Difference from the uncharged mass-less particle, the geodesics of the charged massive particle tunneling from the black hole is not light-like, but determined by the phase velocity. The derived result shows that the tunneling rate depends on the emitted particle's energy and electric charge, and takes the same functional form as uncharged particle. It proves also that the exact emission spectrum is not strictly pure thermal, but is consistent with the underlying unitary theory. PACS Numbers: 04.70.Dy, 97.60.Lf, 05.30.Ch.     

THE INVERSE EIGENPROBLEM WITH RANK-ONE UPDATING AND ITS STABLITY

Let ∑, Г be two n-by-n diagonal matrices with σi,γi as their diagonals. For the inverse eigenvalue problem: look for y∈Rn such that Г + yyT is similar to ∑, we prove thatu also the sufficient condition for the solvability of this inverse problem. Its solution (set) is given explicitly. In some case, the problem is unstable. But we prove that the sums of the square of some contigious components keep stable, i.e., small sum keeps small, large sum has a small relative perturbation, see Theorem 3.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

Asymptotic behaviors of competitive Lotka-Volterra system with stage structure

In this paper, a two-species competitive model with stage structure is presented and studied. Results on the global extinction and permanence are given, which generalize the well-known three theorems for the two species competitive system and, moreover, they confirm the negative effect of stage structure on the permanence of populations as well as estimate the degree of such effect. Conclusions in this paper suggest that for a competitive community stage structure is also one of the important reasons that cause permanence and extinction.     

Studies on self-pumped phase conjugation in Cu-doped (K0.5Na0.5)0.2(Sr0.61Ba0.39)0.9Nb2O6 crystals

The use of Cu-doped (K_0.5Na_0.5)_0.2(Sr_0.61Ba_0.39)_0.9Nb₂O₆ as self-pumped phase conjugators using internal reflection is reported. Reflectivities as high as 63% at 5145.5 nm and 60% at 632.8 nm were realized. It was found that the photorefractive response changes significantly at different doping concentration. The responses of the crystals to the laser wavelength, incident angle and dopant concentration are studied.     

BOUNDEDNESS OF VECTOR-VALUED CALDERN-ZYGMUND OPERATORS ON HERZ SPACES WITH NON-DOUBLING MEASURES

In the paper we obtain vector-valued inequalities for Calder6n-Zygmund operator, simply CZO on Herz space and weak Herz space. In particular.we obtain vector-valued inequalities for CZO on Lq(Rd, |x|αdμ) space, with 1< q <∞, -n <α< n(q -1), and on L1,∞(Rd,|x|αdμ) space, with -n <α< 0.     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.