Aggregation-induced Emission Materials for High-efficiency Perovskite Solar Cells

The perovskite solar cells (PSCs) with high efficiency and stability are in great demand for commercial applications. Although the remarkable photovoltaic feature of perovskite layer plays a great role in improving the PCE of PSCs, the inevitable defects and poor stability of perovskite, etc. are the bottleneck and restrict the commercialization of PSCs. Herein, a review provides a strategy of applying aggregation-induced emission (AIE) molecules, containing passivation functional groups and distinct AIE character, which serves as the alternative materials for fabricating high-efficiency and high-stability PSCs. The methods of introducing AIE molecules to PSCs are also summarized, including additive engineering, interfacial engineering, hole transport materials and so on. In addition, the functions of AIE molecule are discussed, such as defects passivation, morphology modulation, well-matched energy level, enhanced stability, hole transport ability, carrier recombination suppression. Finally, the detailed functions of AIE molecules are offered and further research trend for high performance PSCs based on AIE materials is proposed.     

Cd1−xZnxTe: Growth and characterization of crystals for X-ray and gamma-ray detectors

The choice a suitable crystal growth method and a reasonable x value is of profound importance in the preparation of high quality Cd_1−xZn_xTe crystals for x-ray and gamma-ray detectors. The present paper reviews the evolution and development of Cd_1−xZn_xTe crystal growth for x-ray and gamma-ray detectors. At the same time, emphasis is put upon finding the relationship between the x value and the quality of the Cd_1−xZn_xTe. Three sets of Cd_1−xZn_xTe ingots with different x values, specifically 0.10, 0.15, and 0.20 were grown by the vertical Bridgman method (VBM) and characterized. Their x specification was then correlated with their dislocation densities, Te precipitates, inclusions, IR transmission, resistivities, and impurity concentrations, respectively. It was found that VBM Cd_0.85Zn_0.15Te as grown in this paper possessed the best choice of qualities with respect to defects and impurities.     

Bulk metallic glasses based on ytterbium and calcium

We report the formation of a family of bulk metallic glasses (BMGs) based on rare earth element of ytterbium and alkaline earth element of calcium. The glass-forming ability, atomic packing density and corrosion behaviors of the BMGs show an extremum around the eutectic point with the change of the concentration of Yb and Ca.     

(Ga,Mn)As中电流诱导自旋极化的磁光Kerr测量

在GaAs吸收带边附近, 利用磁光Kerr效应测量了(Ga,Mn)As和p-GaAs样品的电流诱导Kerr旋转谱和反射谱, 两者都呈现出Lorentz曲线形状. 电流诱导Kerr旋转角和反射率随着电流的增大而增大, Kerr角与电流的大小成正比关系, 反射率与电流的平方成正比关系. (Ga,Mn)As的Kerr旋转角比p-GaAs的大了一个数量级, 这说明Mn原子的掺杂使得电流诱导的自旋极化增强. 另外, 还测量了温度和入射光偏振方向对电流诱导Kerr旋转谱和反射谱的影响. 发现随着温度的升高, Kerr谱和反射谱均向长波方向移动, 这与GaAs带边随温度的变化是一致的.     

A new gas chromatographic stationary phase: Polysiloxane with β-cyclodextrin side chain for the separation of chiral and positional isomers

Summary A new stationary phase [bikis(2,6-di-O-pentyl-3-O-hex-6-enyl)-pentakis(2,6-di-O-pentyl-3-O-methyl)-β-CD-polysiloxane] was synthesized and successfully applied in GC for the separation of chiral and achiral isomers. It possesses high column efficiency and exhibits excellent separation ability for disubstituted benzenes. Some typical enantiomers and optical isomers are well separated. The separation behavior of this new phase is characterized and discussed.     

椭圆偏振技术研究VHF-PECVD高速沉积微晶硅薄膜的异常标度行为

采用VHF-PECVD技术高速沉积了不同生长阶段的微晶硅薄膜,通过椭圆偏振技术研究了生长过程中微晶硅薄膜表面粗糙度的演化.实验结果表明,沉积气压P_g=300 Pa时,β=0.81,其超出标度理论中β最大值为0.5范围,出现异常标度行为.这表明微晶硅薄膜高速生长中还存在其他粗糙化增加的因素,此粗糙化增加的因素与阴影作用有关. 关键词： 微晶硅薄膜 椭偏光谱法 生长机制 表面粗糙度     

BaCuO_2的添加对YBa_2Cu_3O_(7-δ)临界电流密度的影响

掺入BaCuO2杂相的YBa2Cu3O7-δ(YBCO)粉末样品采用固相反应方法制备获得。XRD的Rietveld精修显示BaCuO2杂相和YBCO并存。在YBCO+xBaCuO2(x=0,0.05,0.1,0.2,0.3)的一系列样品中,当x=0.05时,样品的临界电流密度最大。在磁场中,微量BaCuO2杂相的添加,使YBCO的临界电流(Jc)提高了,但超导转变温度(Tc)稍微有所下降。临界电流密度的这些特征行为来自于两方面的共同作用,一方面是超导性的变化,另一方面纳米尺寸范围内的空间分布的非均匀性。     

ParNes: a rapidly convergent algorithm for accurate recovery of sparse and approximately sparse signals

In this article, we propose an algorithm, nesta-lasso, for the lasso problem, i.e., an underdetermined linear least-squares problem with a 1-norm constraint on the solution. We prove under the assumption of the restricted isometry property (rip) and a sparsity condition on the solution, that nesta-lasso is guaranteed to be almost always locally linearly convergent. As in the case of the algorithm nesta, proposed by Becker, Bobin, and Candès, we rely on Nesterov’s accelerated proximal gradient method, which takes $O(\sqrt {1/\varepsilon })$ iterations to come within $\varepsilon > 0$ of the optimal value. We introduce a modification to Nesterov’s method that regularly updates the prox-center in a provably optimal manner. The aforementioned linear convergence is in part due to this modification. In the second part of this article, we attempt to solve the basis pursuit denoising (bpdn) problem (i.e., approximating the minimum 1-norm solution to an underdetermined least squares problem) by using nesta-lasso in conjunction with the Pareto root-finding method employed by van den Berg and Friedlander in their spgl1 solver. The resulting algorithm is called parnes. We provide numerical evidence to show that it is comparable to currently available solvers.     

Propagation of elegant Laguerre–Gaussian beams through an annular apertured paraxial ABCD optical system

Based on the generalized Huygens–Fresnel diffraction integral and the expansion of the hard aperture function into a finite sum of complex Gaussian functions, the approximate analytical expression of elegant Laguerre–Gaussian beams passing through a paraxial ABCD optical system with an annular aperture is derived. Meanwhile, the corresponding closed-forms for the unapertured, circular apertured or circular black screen cases are also given. The obtained results provide more convenience for studying their propagation and transformation than the usual way by using diffraction integral formula directly. Some numerical examples are given to illustrate the propagation properties of elegant Laguerre–Gaussian beams.     

白钨酸研究——Ⅶ.K3W2Cl9的制备及反应

用粉状白钨酸作原针,在一般条件下制备K₃W₂Cl₉,产率达53%,证明白钨酸是比黄钨酸优越的钨化学试剂。研究了K₃W₂Cl₉经离子又换转化为酸的形态后与Ndz₂(C0₃)₃的反应。得到了新的化合物NdW₂Cl₉,提出了一条新的制备溶解度大的各种金属离子与W₂Cl₉^3-的化合物的途径。 对K₃W₂Cl₉和NdW₂Cl₉进行了紫外可见尤谱和X针线粉末衍射的测定。