光学活性甲苄菊酯的合成及其结构与活性关系的研究

本文改进了Goffinet方法,完成了(±)-trans菊酸的拆分;改进了Campbel?方法,只用一种拆分剂(奎宁)完成了对(±)-cis菊酸的拆分。用IR、~1HNMR、旋光度测定等方法确定了各甲苄菊酯光学异构体的结构。生物试验表明结构与活性有如下关系:1,各异构体中以1R-酯的杀虫活性为高,尤其(-)-(1R,3R)-trans甲苄菊酯对全部测试昆虫均显示较高的杀虫活性;2,昆虫不同,各异构体的活性次序也略有差异。     

Fabrication of superhydrophobic surfaces from binary colloidal assembly

In this work, superhydrophobic surfaces were derived from binary colloidal assemblies. CaCO(3)-loaded hydrogel spheres and silica or polystyrene ones were consecutively dip-coated on silicon wafers. The former assemblies were recruited as templates for the latter self-assembly. Due to the hydrophilicity difference between silicon wafers and CaCO(3)-loaded hydrogel spheres, the region selective localization of silica or polystyrene spheres leads to irregular binary structures with a hierarchical roughness. The subsequent modification with low surface energy molecules yields a superhydrophobic surface. The heating treatment may largely enhance the mechanical stability of the resulting binary structures, which allows regeneration of the surface superhydrophobicity, providing a good durability in practice.     

Rheological Behavior of Titanium Dioxide Suspensions

The rheological properties of titanium dioxide dispersed in water are measured over a wide range of powder concentrations, temperatures, and pH values. The value of intrinsic viscosity of titanium dioxide measured with an Ubbelohde capillary viscometer is 3.55, which is useful for determining the shape and aggregation property of the particles. The yield stress and steady shear viscosity of titanium dioxide with broad and narrow particle size distributions were measured over a wide range of solid volume fractions on a Brabender rheometer. It is observed that the rheological properties of the suspensions are quite different due to the difference in particle size distributions. Quemada, Casson, and Zhou's models were used to fit the experimental data and useful parameters were obtained. Calculated data are also in good agreement with the experimental data. As expected, the shear viscosity and yield stress decrease with increasing temperature. But when the temperature is around 50 degrees C, yield stress increases with increasing temperature while shear viscosity exhibits a complex behavior. The phenomena are very interesting and special. The Peclet number was used to analyze the shear thickening behavior. Models were also used to describe the shear viscosity under different temperatures and the master plots of the reduced variables eta/eta(infinity) vs t(c)gamma; at different temperatures are superimposed, which means the agreement is fair and the models are suitable to describe the rheological properties of titanium dioxide suspensions. pH effects were investigated on a Rheometrics RFS-II rheometer and it was found that pH can change the surface charge of the particles, which also affects the rheological behavior. The pH at which maximum shear viscosity and yield stress occur is in concordance with the isoelectric point. Copyright 2001 Academic Press.     

电解质水溶液在丙酸十二铵-四氯化碳溶液中的增溶

表面活性剂在非极性溶剂中形成的反胶束在催化反应、光化学、蛋白质苹取分离等方面有着广泛的应用问．这些应用与反胶束的性质有着密切的关系，而增溶水后的反胶束其形状和大小都会发生很大的变化．增溶不同水量的反胶束的微极性、酸碱性、微勤度等已有不少文献报导［2－5］．一些不溶于非极性溶剂而溶于水的物质可以溶解在非极性溶剂中的反胶束核心水团中，这个现象被称为二次增溶．其中，电解质的二次增溶对于研究配体转换反应。酶催化反应问及改变反胶束内部的微环境有着十分重要的作用，Aebi和Weibush回首先研究了有水存在时N。CI在A…     

12-钨磷酸希土盐DMF、DMSO加合物的合成、性质及其热分解动力学常数研究

合成了8种钨磷酸希土盐LnPW₁₂O₄₀·xH₂O(Ln=Y、La、Nd、Sm、Gd、Dy、Ho、Yb)的DMF、DMSO加合物,对加合物进行了组成分析,通过IR光谱、TG-DTA曲线对加合物进行了性质表征,并着重研究了加合物热分解过程的动力学,给出了热分解反应级数n和活化能E.     

十九种长链正烷基脂肪酸的碳链骨架振动能量研究

本文通过红外光谱(FT-IR)测量数据和预测数据,计算与研究了十九种长链正烷基脂肪酸(简称脂肪酸或碳酸)的碳链骨架振动能量。结果显示出脂肪酸的碳链骨架振动能量随碳数增加呈阶梯状关系,而且脂肪酸的碳链骨架振动能量∑E出现奇偶数更迭规律。此结果可用来解释脂肪酸的熔点或熔化热呈现奇偶数更迭现象。     

Solid-phase,Pd-catalyzed silicon-aryl carbon bond formation. Synthesis of sansalvamide A peptide

A palladium-catalyzed silicon-aryl carbon bond formation on solid-phase is reported. A phenylalanine silane resin was prepared directly from protected iodo-substituted phenylalanine with butyl diethylsilane polystyrene in one step. A rapid and high-yield solid-phase synthesis of sansalvamide A peptide was achieved from the phenylalanine silane resin. [reaction: see text]     

Formation of nanostructured polymer filaments in nanochannels

We describe the use of hard etching methods to create nanodimensional channels and their use as templates for the formation of polymer filament arrays with precise dimensional and orientational control in a single integrated step. The procedure is general as illustrated by the radical, coordination, and photochemical polymerizations that were performed in these nanochannels. The nanochannel templates (20 nm high, 20-200 nm wide, and 100 mum long) were fabricated by the combined use of electron-beam lithography and a sacrificial metal line etching technique. Radical polymerization of acrylates, metal-catalyzed polymerization of norbornene, and photochemical polymerization of 1,4-diiodothiophene were carried out in these nanochannels. The polymers grown follow the dimensions and orientation of the channels, and the polymer filaments can be released without breaking. The approach opens up the possibility of just-in-place manufacturing and processing of patterns and devices from nanostructured polymers using well-established polymer chemistry.     

N2,O2水溶液光谱的分子动力学模拟

用分子动力学模拟方法研究了N2和O2水溶液的光谱性质．给出了能描述分子内部运动的溶质－溶剂相互作用势．对溶质和溶剂原子的速度自相关函数（VACF）作了计算．讨论了所得VACF的性质并计算了其谱密度．溶质分子振动谱出现的红移，与液态N2，O2的Raman实验结果相吻合．模拟得出的转动谱表明了溶剂分子对溶质转动运动的阻滞，模拟结果也表明VACF计算对溶液和液体光谱的研究十分有效．