激光诱导击穿光谱法定量分析水泥中的铜元素

为定量分析水泥中的铜(Cu)元素,根据激光诱导击穿光谱分析方法(Ll BS)的特点,建立了激光诱导击穿光谱分析系统。采用标准加入法为定标方法,制备了5个不同含铜量的水泥样品。根据LIBS谱图,以213.598 nm和219.958 nm作为分析线。应用Savitzky-Golary卷积平滑方法对光谱数据进行了预处理,比较了Guass、Lorentz和Voigt拟合方法对光谱曲线的拟合效果。对测量结果采用一元线性拟合建立了相应的定标曲线,213.598 nm和219.958 nm定标曲线的校正决定系数分别为0.994 8和0.986 4,平均相对误差分别为3.20%和5.78%。实验结果表明:213.598 nm作为分析线的准确度优于219.958 nm分析线,该方法能够满足水泥中Cu元素定量分析的要求。     

不同驱动力下瓦斯水合物生长过程Raman光谱特征

基于煤矿瓦斯(CH₄∶C₂H₆∶N₂=67.5∶22.5∶10)水合物相平衡曲线开展四种驱动力ΔP水合动力学实验,利用可见显微Raman光谱仪获取水合物生长过程光谱图,根据水合物相中C₂H₆ C-C键伸缩振动特征峰Raman位移确定了4组实验中水合物为sⅡ结构。基于van der Waals与Platteeuw模型获取瓦斯水合物生成过程中水合物相气体组分及水合指数变化规律。研究表明： 驱动力的大小影响水合物的稳定性,随着驱动力的增加,CH₄相比C₂H₆逐渐占据更多的孔穴结构,CH₄在水合物相内比例增加,水合物稳定性越强;瓦斯中N₂,CH₄和C₂H₆进入水合物孔穴优先级可以通过分子与水合物孔穴的直径比进行确定,分析认为在sⅡ水合物结构中小孔穴CH₄优先级最高,大孔穴C₂H₆最高;基于瓦斯水合物稳定性,对水合物生长过程客体分子的物质传递规律进行描述,为瓦斯水合物的微观生长提供理论基础。     

Determination of the cluster spectroscopic factor of the 10.3 MeV state in 12Be

From an inelastic excitation and breakup experiment with a ¹²Be beam at 29 MeV/u, a large ⁴He+⁸He cluster decay width of 1.1(2) MeV is determined for a state at an excitation energy of 10.3 MeV and with a spin parity of 0+. By using the R-matrix analysis, a cluster spectroscopic factor of 0.53(10) is extracted from the cluster partial width, providing a strong support for the clustering structure in ¹²Be. A specially designed zero-degree telescope played an essential role in the present experiment and has been demonstrated to be a promising tool in future studies of the molecular-like resonances near the cluster separation threshold.     

Remote excitation and remote detection of a single quantum dot using propagating surface plasmons on silver nanowire

Using propagating surface plasmons(SPs) on a silver nanowire(NW), we demonstrate that a focused laser light at the end of the silver NW can excite a single quantum dot(QD) microns away from the excitation spot. The QD–NW interaction allows the excited QD convert part of its energy into propagating SPs, which then can be detected at remote sites.Simultaneous multi-QD remote excitation and remote detection can also be realized. Furthermore, the tight confinement of the propagating SPs around the NW surface enables the selective excitation of QDs very close in space, which cannot be realized under the conventional excitation condition. This remote excitation and remote detection approach may find applications in optical imaging and the sensing of chemical and biological systems.     

227-W output all-fiberized Tm-doped fiber laser at 1908 nm

In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.     

利用自由曲面进行微变焦共形光学系统设计

为使万向支架式共形导引头光学系统获得更大的无渐晕观察视场,设计了利用自由曲面进行像差平衡补偿的折反射式微变焦共形导引头光学系统.系统在所有观察视场中的均方根点斑直径都接近或小于像元尺寸,且在非零搜索观察视场中都具有接近衍射极限的成像质量,该方法使共形光学系统获得大的无渐晕观察视场成为可能.     

A generalized Kolmogorov-Sinai-like entropy under Markov shifts in symbolic dynamics

In this paper, a generalized Kolmogorov-Sinai-like entropy ( entropy) in the sense of Tsallis is proposed with a nonextensive parameter q under Markov shifts, which contains the classical Kolmogorov-Sinai (KS) entropy and the Rényi entropy as well as Bernoulli shifts as special cases. To verify the formula of this entropy, a one-dimensional iterative system is chosen as an example of Markov shifts, and its entropy is evaluated by a new refinement method of symbolic dynamics called symbolic refinement which differs from the conventional numerical method. The numerical results show that this entropy is monotonically decreasing as q increases.     

以最大原子密度定义合金相中的第一近邻团簇

本文提出利用不同壳层所包含的径向原子密度, 即单位体积内的原子个数随着径向的分布, 来方便而精确地定义团簇, 即具有最大径向原子密度的且表面呈现三角密堆结构的完整壳层为第一近邻团簇. 最后以Al-Ni-Zr合金相为例说明了该方法的合理性与适用性, 及此方法所定义的团簇与非晶形成的关系.