内应力对Mn2NiGa铁磁形状记忆合金的结构、相变和磁性能的影响

通过施加压应力的方法,在铁磁形状记忆合金Mn₂NiGa中引入残留内应力,研究了内应力对 Mn₂NiGa材料的结构、相变和磁性能的影响.研究发现,加压过程使材料发生了塑性形变,在材料内部引入了大量的位错缺陷.卸载后保留的位错缺陷在材料中造成了残留的内应力,导致了马氏体相变温度大幅度提高, 使原本室温下的母相转变成了马氏体相.测量到导致样品转变成马氏体的阈值压应力为1.0 GPa.加压形成的马氏体中的残留内应力将矫顽力从低于50 Oe提高到350 Oe.残留内应力在730 K的热处理中由于位错缺陷的消失而得以消除,样品实现了马氏体逆相变.如此高的逆相变温度使得 Mn₂NiGa马氏体的居里温度测量成为可能,获得了530K的数值.     

电光调制对外部光反馈垂直腔表面发射激光器输出矢量混沌偏振的操控

基于周期性极化铌酸锂晶体的线性电光效应耦合波理论,数值研究了电光调制对外部光反馈垂直腔表面发射激光器(VCSEL)输出矢量混沌偏振模的操控.研究结果表明,VCSEL输出的偏振度随着电光晶体的长度或施加于电光晶体的外电场强度成周期性转换,控制一定的施加外电场强度和晶体的长度,激光器的不同参数下引起初始混沌偏振态都可以转换为其他任意混沌偏振态.特别是合理选择一定的施加外电场强度或晶体长度,VCSEL输出的任意混沌偏振模可以转换为完全一致的两线性混沌偏振模(x和ŷ偏振),即两线性混沌偏振模的能量能够达到稳定和完全均衡.     

金银三层纳米管局域表面等离激元共振特性研究

相对于单一金属纳米材料,二金属复合纳米材料具有更大的潜在应用价值.基于时域有限差分方法,研究了SiO₂-Ag-Au和SiO₂-Au-Ag二金属三层纳米管的消光光谱,并对其局域表面等离激元共振(Localized Surface Plasmon Resonance,LSPR)特性进行了分析.研究发现,内核尺寸变大将导致上述两种金属纳米管LSPR峰红移;内层金属及外层金属壳层厚度增大均会导致其LSPR峰蓝移.银壳厚度变化对纳米管LSPR的调制作用大于金壳厚度变化造成的影响.上述现象可以利用等离激元杂化理论及自由电子和振荡电子变化的竞争机制进行分析.     

ErP5O14非晶玻璃的红外量子剪裁

研究了Er_1.0P₅O₁₄铒非晶玻璃的红外量子剪裁现象. 从吸收谱和激发光谱的计算比较中肯定了Er_1.0P₅O₁₄非晶 玻璃的1537.0 nm红外荧光为多光子量子剪裁荧光. 从Er_1.0P₅O₁₄非晶玻璃的可见和红外荧光发射光谱中发现激发²H_11/2, ⁴G_11/2和⁴G_9/2能级所导致的⁴I_13/2→⁴I_15/2量子剪裁红外荧光很强;基于自发辐射速率、无辐射弛豫速率和能量传递速率等参数的计算,对其量子剪裁机理进行了分析.发现起源于基态的强下转换能量传递{²H_11/2→⁴I_9/2,⁴I_15/2→⁴I_13/2},{⁴G_11/2→⁴I_13/2, ⁴I_15/2→²H_11/2},{⁴G_9/2→⁴F_7/2,⁴I_15/2→⁴I_13/2}和{⁴G_9/2→⁴I_13/2, ⁴I_15/2→²H_11/2}是导致Er_1.0P₅O₁₄非晶玻璃具有强的三光子和四光子量子剪裁红外荧光的原因.研究结果对改善太阳能电池效率有一定意义.     

一种有效的提高复杂网络同步能力的自适应方法

本文提出了一种根据节点状态来调节网络中边权重的自适应方法(MDMF)来提高网络的同步能力, 总结了网络规模与网络平均速度对同步能力的影响. 研究发现, 通过这种自适应方法, 得到网络的同步能力与网络规模成幂率关系. 在相同网络规模下, 此方法能使网络的同步能力高于无权重网络几个数量级.当网络规模越大时, 提高同步能力越高效.     

2 μm Cr,Tm,Ho:YAG激光热退偏效应的数值模拟及实验研究

理论分析了Cr,Tm,Ho:YAG激光晶体的热退偏效应, 模拟计算了该晶体棒端面退偏度的分布, 并进行了偏光干涉实验验证. 结果表明, 数值模拟和实验研究结果完全一致, 热致退偏效应随抽运能量增大而增强, 退偏度分布呈十字形, 最大退偏度发生在晶体棒端面上与起偏器偏振方向成45°方位处. 以此提出了高能量Cr,Tm,Ho:YAG激光器的热退偏补偿方法, 获得了激光脉冲能量提高24%以上的实验效果.     

全原子分子动力学模拟结合核磁共振波谱研究N-甘氨酰甘氨酸水溶液的结构和弱相互作用

采用分子动力学模拟方法结合核磁共振化学位移系统研究了甘氨酰甘氨酸水溶液体系饱和溶解度范围的弱相互作用. 径向分布函数表明体系中不同类型的原子显示出形成氢键的不同能力. 氢键网络分析发现了不同氢键所能形成的分子簇结构. 随温度变化核磁共振化学位移值用于研究形成氢键的变化情况,并和模拟得到的结果进行比较,模拟和实验结果得到了较好的吻合.     

Laser-induced damage characteristic of porous alumina optical films

Pure aluminum films were deposited on B270 glass by electron beam evaporation technique. The aluminum films, which were used as anode, were placed in phosphoric acid to prepare porous alumina films using a two-step anodization method. They were subsequently annealed in high temperature to improve transmission. The microstructure, transmitted spectrum and laser damage characteristics of the alumina films were then tested. Their microstructure formed in phosphoric acid was retiform. The transmissivity can be increased efficiently if the annealing temperature is adequately high. The laser-damaged spots of the porous films were formed by innumerable small damaged pits with no mutual effect. In contrast, the laser-damaged spots of the compact films were formed by several larger damaged pits which acted together toward expansion. The damage process of the porous films comprised heat ablation and stress fracture.     

All-optical 40 Gb/s wavelength conversion using hybrid SOI-based MZI and SOAs configuration

In this paper, we present a compact combination of silicon-based Mach–Zehnder interferometer (MZI) and semiconductor optical amplifiers (SOAs) to perform all-optical return to zero (RZ)-to-RZ and non-return to zero (NRZ) wavelength conversions at a bit rate of 40 Gb/s. Using the proposed theoretical project, the attractive issue is that converted signals with inverted and noninverted formats can be simultaneously achieved at the same target wavelength. Moreover, both extinction ratio and eye-opening ratio of the converted RZ and NRZ signals can be significantly optimized by judiciously adjusting the system parameters and initial conditions.     

Method for suppressing the mirror image in Fourier-domain optical coherence tomography

A method, novel to our knowledge, for effective mirror image suppression in Fourier-domain optical coherence tomography based on a phase shift between neighboring A-mode scans is demonstrated. By realizing that the phase shifts of the real and mirror images are mutually reversed and assuming that the real image intensities of the two successive A-mode scans are the same, we can solve a set of two coupled equations to obtain the real image signals. The images based on the scanning of a high-resolution spectral-domain optical coherence tomography system are processed to show effective mirror image suppression results. Compared with a similar method of broad application, our approach has the advantages of shorter process time and higher flexibility in selecting the concerned image portions for processing.